Pipishell PILTK4 Tilt TV Wall Mount Instruction Manual

1. Giới thiệu

This manual provides detailed instructions for the safe and proper installation and operation of your Pipishell PILTK4 Tilt TV Wall Mount. Please read all instructions carefully before beginning installation to ensure correct setup and to prevent damage or injury. Keep this manual for future reference.

2. Sản phẩm hếtview & Đặc trưng

The Pipishell PILTK4 Tilt TV Wall Mount is designed to securely hold most 37-85 inch LED, LCD, OLED, Plasma, Flat, and Curved TVs. It offers a low-profile design and a tilt function for optimal viewđang.

• Tương thích phổ quát: Supports TVs from 37 to 85 inches, weighing up to 132 lbs (60 kg). Compatible with VESA patterns from 200x100mm to 600x400mm.
• Pro thấpfile Thiết kế: Mounts your TV just 1.44 inches (3.65 cm) from the wall for a clean, sleek appearance.
• Độ nghiêng có thể điều chỉnh: Allows for a downward tilt of 0° to 7° to reduce glare and enhance viewing thoải mái.
• Cơ chế khóa an toàn: Features pull cords for easy locking and releasing of the TV, with elegant panel edges to prevent accidental slipping.
• Cài đặt dễ dàng: Designed for straightforward setup with included hardware and a clear graphical guide.

This image illustrates the Pipishell PILTK4 mount's compatibility with large TVs, supporting sizes from 37 to 85 inches and a maximum load of 132 lbs.

3. Khả năng tương thích

Before installation, verify that your TV meets the following compatibility requirements:

• Kích thước TV: Fits most 37-85 inch (94-216 cm) televisions.
• Sức chịu tải: Supports TVs weighing up to 132 lbs (60 kg). Do not exceed this weight limit.
• Mẫu VESA: Compatible with VESA mounting patterns ranging from 200x100mm to 600x400mm. Refer to your TV's manual or measure the distance between the mounting holes on the back of your TV (horizontal x vertical).
• Loại tường: Can be mounted on 16-24 inch (40-61 cm) wood stud walls, concrete walls, or brick walls. KHÔNG cài đặt trên vách thạch cao một mình.

This diagram illustrates the VESA pattern compatibility, showing the minimum and maximum dimensions for mounting holes on the back of your TV.

This image demonstrates the suitable wall types for installation, including wood studs, concrete, and brick. It explicitly warns against installing on drywall only.

4. Thông tin an toàn

Improper installation can result in serious injury or damage. Please follow these safety guidelines:

• Ensure the mounting surface can safely support the combined weight of the mount and your TV.
• Không được vượt quá trọng lượng tối đa cho phép là 132 lbs (60 kg).
• Luôn sử dụng máy dò đinh để xác định chính xác vị trí các thanh gỗ đỡ tường.
• For concrete or brick walls, use appropriate anchors (not included) and consult a professional if unsure.
• Giữ trẻ em và vật nuôi tránh xa trong khi lắp đặt.
• Check for hidden electrical wires or plumbing before drilling.

5. Nội dung gói hàng

Your Pipishell PILTK4 TV Wall Mount package includes the following components:

• Lắp ráp tấm tường
• Chân đế TV (2)
• Các loại ốc vít, vòng đệm và miếng đệm cho TV.
• Lag Bolts and Washers for Wall Mounting
• Concrete Anchors (for concrete/brick installation)
• Mức độ bong bóng
• Hướng dẫn sử dụng

6. Hướng dẫn cài đặt

Follow these steps for a secure installation. A detailed English graphical installation guide is included in your package. You can also refer to the official installation video for visual guidance.

6.1. Prepare Your TV

1. Cẩn thận đặt tivi úp mặt xuống một bề mặt mềm, sạch để tránh trầy xước.
2. Attach the TV brackets to the back of your TV using the appropriate screws, washers, and spacers from the provided hardware kit. Ensure the brackets are centered and securely fastened.
3. Check that the brackets do not block any TV ports. If they do, adjust the bracket position or use different spacers if available.

This image shows the back of a TV with mounting brackets, emphasizing the importance of checking that TV ports are not obstructed by the brackets.

6.2. Mount the Wall Plate

1. Determine the desired height for your TV. Mark the center of where the TV will be mounted.
2. For wood stud installation: Use a stud finder to locate the edges and center of two adjacent wood studs. Position the wall plate so its mounting holes align with the center of the studs. Use the included bubble level to ensure the wall plate is perfectly horizontal. Mark the drilling locations.
3. For concrete/brick wall installation: Use the wall plate as a template to mark the drilling locations. Ensure the wall plate is level.
4. Drill pilot holes at the marked locations. The size of the drill bit will depend on your wall type and the lag bolts/anchors used.
5. Secure the wall plate to the wall using the appropriate lag bolts and washers (and concrete anchors if applicable). Tighten all fasteners firmly.

6.3. Hang the TV

1. With assistance, carefully lift the TV and hook the attached TV brackets onto the top edge of the installed wall plate.
2. Từ từ hạ TV xuống cho đến khi các giá đỡ khớp hoàn toàn với tấm gắn tường.
3. Pull the quick-release cords located at the bottom of the TV brackets to ensure the TV is securely locked into place. You should hear a 'click' sound.

This image visually represents the ease of installation, showing the TV being placed onto the wall mount.

This image highlights the handy pull cords, which allow for easy locking and releasing of the TV from the wall mount.

This image shows the strong security locks engaged, ensuring the TV is firmly attached to the mount.

6.4. Official Installation Videos

For a visual guide to the installation process, please watch the following official videos:

7. Hướng dẫn vận hành

The Pipishell PILTK4 mount offers simple operation for adjusting your TV's viewgóc ing.

7.1. Adjusting the Tilt Angle

To adjust the tilt of your TV, gently push or pull the bottom of the TV to achieve the desired downward angle (0° to 7°). The mount is designed to hold its position once adjusted.

This image demonstrates the tilt feature, allowing you to adjust the TV downwards by 0-7 degrees to minimize glare.

7.2. Locking and Releasing TV

The TV is secured to the wall plate using integrated pull cords. To release the TV from the mount, pull both cords downwards simultaneously. To lock it back in place, ensure the TV brackets are properly seated on the wall plate and the cords are released, allowing the locking mechanism to engage.

This image illustrates the low-profile design, showing the TV sitting 1.44 inches from the wall, and details the pull cord for quick release.

8. Bảo trì

To ensure the longevity and safe operation of your TV wall mount, perform the following maintenance:

• Kiểm tra định kỳ: Every few months, check all screws and bolts to ensure they are tight and secure. Retighten if necessary.
• Vệ sinh: Dùng khăn mềm, khô lau sạch giá đỡ để loại bỏ bụi. Tránh sử dụng chất tẩy rửa có tính ăn mòn hoặc dung môi.
• Kiểm tra thiệt hại: Regularly inspect the mount for any signs of wear, damage, or corrosion. If any issues are found, contact customer service immediately.

KHAI THÁC. Xử lý sự cố

Nếu bạn gặp bất kỳ sự cố nào trong hoặc sau khi cài đặt, hãy tham khảo các vấn đề và giải pháp thường gặp sau đây:

• TV không cân bằng: Ensure the wall plate was installed level. Some mounts allow for minor post-installation leveling adjustments; check your specific model's features. If not, you may need to re-drill pilot holes for the wall plate.
• TV does not lock onto the wall plate: Ensure the TV brackets are correctly seated on the wall plate. Pull the release cords to ensure the locking mechanism is not obstructed.
• Khó điều chỉnh độ nghiêng của TV: Check for any obstructions behind the TV. Ensure all mounting screws on the TV brackets are tightened appropriately, but not excessively, to allow for movement.
• Núi có cảm giác không ổn định: Immediately remove the TV from the mount. Re-check all wall fasteners and ensure they are securely anchored into studs or appropriate concrete/brick anchors. Verify that the wall type is suitable and the weight capacity is not exceeded.

10. Thông số kỹ thuật

11. Bảo hành và Hỗ trợ

Pipishell stands behind the quality of its products. This TV wall mount is constructed from high-quality steel materials, ensuring strength and durability.

• Bảo hành: The product comes with a 5-year friendly customer service guarantee.
• Hỗ trợ khách hàng: If you have any questions, concerns, or require assistance with installation or operation, please do not hesitate to contact Pipishell customer service.