1. Thông tin an toàn
Please read all instructions carefully before using the BLS T401 LED Motion Sensor Closet Light. Retain this manual for future reference.
- Không để thiết bị ở nơi có nhiệt độ quá cao hoặc ánh nắng trực tiếp.
- Giữ thiết bị tránh xa nước và độ ẩm cao.
- Không được tháo rời hoặc sửa đổi thiết bị. Việc này có thể làm mất hiệu lực bảo hành và gây ra rủi ro về an toàn.
- Chỉ sử dụng cáp sạc được cung cấp kèm theo hoặc cáp USB-C được chứng nhận để sạc sản phẩm.
- Ensure the installation surface is clean and dry before attaching the light using adhesive methods.
2. Sản phẩm hếtview
The BLS T401 LED Motion Sensor Closet Light is a versatile, rechargeable lighting solution designed for various indoor applications. It features a motion sensor for automatic illumination and a long-lasting battery.
Figure 2.1: The BLS T401 LED Motion Sensor Closet Light, a sleek silver bar with a central motion sensor and light strip.
Các tính năng chính:
- Chiếu sáng siêu sáng: 200 lumens with 6000K Clean White Glow.
- Cài đặt không dây: No hard wiring required.
- Cảm biến chuyển động: Automatically turns on when motion is detected in dark or low-light conditions.
- Pin sạc: Built-in 4500mAh UL certified battery for extended use.
- Nhiều tùy chọn gắn kết: Magnetic attachment, 3M adhesive tape, or screws.
- Công tắc 3 chế độ: OFF, ON, and AUTO modes for flexible operation.
Figure 2.2: Diagram illustrating the dimensions of the BLS T401 light (15.1 inches long, 0.9 inches wide, 0.98 inches high) and its 120-degree motion detection range up to 10 feet.
3. Thiết lập
The BLS T401 offers flexible installation options to suit various surfaces.
Phương pháp cài đặt:
- Đính kèm từ tính: The light has built-in strong magnets. It can be directly attached to any iron surface without additional mounting hardware.
- Băng dính: For non-magnetic surfaces, use the included 3M adhesive tape. Clean the desired surface thoroughly, peel off the protective film from the adhesive pads, attach them to the metal mounting brackets, and then firmly press the brackets onto the surface. Once the brackets are secure, the light can be magnetically attached to them.
- Gắn vít: For a more permanent installation, use the included screws. Mark the positions for the screws through the holes on the metal mounting brackets. Drill pilot holes if necessary, then secure the brackets with screws. Finally, attach the light magnetically to the installed brackets.
Figure 3.1: Step-by-step guide for installing the light using adhesive tape and magnetic brackets, including an example of magnetic attachment to a refrigerator and under-cabinet placement.
4. Hướng dẫn vận hành
The BLS T401 features a sliding switch with three modes: OFF, ON, and AUTO.
Lựa chọn chế độ:
- TẮT: The light remains off regardless of motion or ambient light.
- TRÊN, BẬT: The light stays continuously on.
- TỰ ĐỘNG: In this mode, the motion sensor activates the light. The light will turn on when it senses motion in both dark and low-light environments. It stays on as long as motion is detected nearby and automatically turns off 18 seconds after motion ceases. A built-in light sensor ensures the light stays off when the ambient environment is bright to conserve battery.
Điều chỉnh cảm biến chuyển động:
The sensitivity of the motion sensor can be adjusted by rotating the light on its magnetic base. Adjust the angle to achieve optimal lighting and motion detection for your specific environment.
Video 4.1: An official BLS LED video demonstrating the light's features, including its battery and motion sensor functionality.
5. Sạc
The BLS T401 is equipped with a 4500mAh rechargeable lithium-ion battery.
Quy trình sạc:
- Locate the USB-C charging port on one end of the light.
- Connect the provided USB-C charging cable to the light and to a compatible USB power source (e.g., wall adapter, computer USB port).
- The charging indicator light will illuminate to show the charging status. Refer to the indicator light guide for specific details (usually red for charging, green for fully charged).
- A full charge can last up to 180 days in AUTO mode, based on 10 activations per day, 20 seconds each time.
Figure 5.1: Visual comparison highlighting the BLS T401's 180-day run time with its large 4500mAh rechargeable battery versus other lights with smaller batteries requiring frequent charging.
6. Bảo trì
To ensure optimal performance and longevity of your BLS T401 LED Motion Sensor Closet Light, follow these maintenance guidelines:
- Vệ sinh: Wipe the light's surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or electronic components.
- Chăm sóc pin: For best battery life, avoid completely draining the battery frequently. Recharge the light when the brightness noticeably diminishes.
- Kho: If storing the light for an extended period, charge it fully and store it in a cool, dry place. Recharge every 3-6 months to maintain battery health.
KHAI THÁC. Xử lý sự cố
If you encounter any issues with your BLS T401, refer to the following common problems and solutions:
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Đèn không bật ở chế độ TỰ ĐỘNG. | Insufficient ambient light (too bright), no motion detected, or low battery. | Ensure the environment is dark enough for AUTO mode. Check for motion within the sensor's range. Recharge the battery. |
| Đèn tắt quá nhanh hoặc sáng quá lâu. | Motion sensor sensitivity or placement. | Adjust the angle of the light on its magnetic base to optimize sensor detection. Ensure no constant motion is within range if it stays on too long. |
| Ánh sáng yếu hoặc nhấp nháy. | Pin yếu. | Sạc lại pin đầy đủ. |
| Ánh sáng không tích điện. | Cáp sạc hoặc nguồn điện bị lỗi. | Try a different USB-C cable and/or a different USB power source. |
8. Thông số kỹ thuật
| Tính năng | Chi tiết |
|---|---|
| Thương hiệu | BLS |
| Số hiệu mẫu | T401 |
| Loại nguồn sáng | DẪN ĐẾN |
| Độ sáng | 200 Lumen |
| Nhiệt độ màu | 6000 Kelvin (Clean White) |
| Dung lượng pin | 4500mAh Lithium Ion (UL Certified) |
| Nguồn điện | Pin chạy bằng |
| Kích thước sản phẩm | Dài 15.1" x Rộng 0.9" x Cao 0.98" |
| Trọng lượng sản phẩm | 8 ounce |
| Vật liệu | Acrylonitrile Butadiene Styrene, Nhôm |
| Phương pháp kiểm soát | Slide Switch (OFF/ON/AUTO) |
| Dải cảm biến chuyển động | Up to 10 feet, 120° detection angle |
| Loại cài đặt | Magnetic, Adhesive, Screw Mount |
| Sử dụng trong nhà/ngoài trời | Trong nhà |
9. Bảo hành và Hỗ trợ
BLS cung cấp một One Year Warranty & Lifelong Service for this product. Should you encounter any issues or have questions regarding your BLS T401 LED Motion Sensor Closet Light, please contact customer service via email at cuscare.blscollection@gmail.com. Please provide your order ID for efficient support. The manufacturer is committed to providing worry-free service.
