1. Sản phẩm hếtview
The PETKIT One-Touch Water Bottle is designed for convenient hydration of your pet on the go. Its highly sealed design and lock function prevent leaks, providing peace of mind during outdoor activities. The compact 300ml size is ideal for portability.
A unique one-button operation allows for easy water dispensing, and any remaining water can be returned to the bottle, minimizing waste. The drinking spout is ergonomically shaped for comfortable use by dogs. For hygiene, the bottle is treated with BioCleanAct antibacterial processing, ensuring clean water for your beloved companion.
Figure 1.1: The PETKIT One-Touch Water Bottle in white, showcasing thiết kế đẹp mắt và hình thức nhỏ gọn.
2. Thông tin an toàn và biện pháp phòng ngừa
- This product is specifically designed as a portable water dispenser for pets (dogs). Do not use it for any other unintended purposes.
- After unpacking, immediately discard all packaging materials, including plastic bags and product fasteners, to prevent choking hazards or injuries to pets and children.
- Do not fill the bottle with hot water. Using hot water may cause damage to the product or pose a burn risk.
- For safety, discontinue use immediately if any damage, cracks, or deformation is observed. Replace the product with a new one.
- Do not use or store the product near open flames or heating appliances, as this may cause deformation or other damage.
3. Thành phần và vật liệu sản phẩm
| Thành phần | Vật liệu |
|---|---|
| Mũ lưỡi trai | Nhựa ABS |
| Cái chai | Tritan |
| Gioăng | Cao su silicon |
4. Thiết lập
Before first use, thoroughly wash all parts of the PETKIT One-Touch Water Bottle with a neutral detergent and rinse with water. Ensure all components are completely dry before assembly and filling.
5. Hướng dẫn vận hành
- Đổ đầy chai: Unscrew the cap from the bottle. Fill the bottle with clean, fresh water. Do not overfill.
- Securing the Cap: Screw the cap back onto the bottle tightly to ensure a leak-proof seal.
- Nước phân phối: To dispense water, unlock the bottle (if locked) and press the large button on the front of the cap. Tilt the bottle forward to allow water to flow into the drinking trough.
- Returning Unused Water: If your pet does not drink all the water, keep the button pressed and tilt the bottle upright. The remaining water will flow back into the main bottle, minimizing waste.
- Locking the Bottle: After use, ensure the bottle is locked to prevent accidental spills during transport. The lock mechanism is typically a small switch or button near the main dispense button.
Figure 5.1: The PETKIT One-Touch Water Bottle positioned on a bench, ready for use during an outdoor excursion with a dog.
Figure 5.2: Demonstrating the one-touch operation, a hand holds the bottle while a dog drinks from the integrated trough.
6. Bảo trì và chăm sóc
- Always wash the bottle with water and a neutral detergent after each use.
- Do not use nylon brushes, metal scrubbers, or cleansers containing abrasives, as these can scratch and damage the bottle's surface.
- This product is not dishwasher safe. Do not use a dishwasher or dryer.
- Do not attempt to sterilize the bottle using a microwave or by boiling.
- Ensure the bottle is completely dry before storing to prevent bacterial growth.
KHAI THÁC. Xử lý sự cố
If you encounter any issues with your PETKIT One-Touch Water Bottle, please consider the following:
- Water not dispensing: Ensure the lock mechanism is disengaged. Check if the button is fully pressed. Verify there is sufficient water in the bottle.
- Rò rỉ: Ensure the cap is screwed on tightly and the gasket is properly seated. Check for any visible damage to the bottle or cap that might compromise the seal. Make sure the lock mechanism is engaged when not in use.
- Difficulty returning water: Ensure the button is pressed while tilting the bottle upright to allow water to flow back.
If the problem persists after checking these points, please refer to the warranty and support section for further assistance.
8. Thông số kỹ thuật
| Thuộc tính | Chi tiết |
|---|---|
| Số mô hình sản phẩm | PETKIP35 |
| Màu sắc | Trắng |
| Dung tích | 300ml |
| Trọng lượng sản phẩm | 0.16kg |
| Loại thú cưng | Chó |
| Pet Growth Stage | Người lớn |
| Ứng dụng đặc biệt | Ngoài trời |
| Pin cần thiết | KHÔNG |
| Nhà sản xuất | DADWAY |
| Ngày đầu tiên có sẵn | 2019/07/16 |
9. Bảo hành và Hỗ trợ
This product comes with a standard manufacturer's warranty. For specific warranty details, including coverage period and terms, please refer to the product packaging or contact PETKIT customer support directly.
For technical support, replacement parts, or any other inquiries, please visit the official PETKIT webtrang web hoặc liên hệ với bộ phận chăm sóc khách hàng của họ. Giữ lại hóa đơn mua hàng để làm bằng chứng mua hàng khi yêu cầu bảo hành.
Bạn có thể tìm thêm thông tin và chi tiết liên lạc trên PETKIT Brand Store on Amazon.
