1. Giới thiệu
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Rollerhouse AC227-13 Single Radio Receiver. Designed for wall mounting, this 433MHz receiver offers reliable wireless control for garage door openers, gate systems, and other compatible devices. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Hình 1: Mặt trước và mặt sau view of the Rollerhouse AC227-13 Single Radio Receiver, showing its compact design and terminal block.
2. Tính năng sản phẩm
- 433MHz Long-Range Signal: Provides reliable wireless control up to 500 feet in open areas, suitable for garage doors, gates, and alarm systems.
- Easy Wall-Mounted Installation: Features a compact design with pre-drilled screw holes for secure and straightforward mounting.
- Tương thích phổ quát: Designed to work with most 433MHz transmitters, including A-OK and other switch control motors.
- Simple Pairing & LED Indicator: Facilitates quick synchronization with compatible transmitters. An integrated LED confirms successful signal reception.
3. Nội dung gói hàng
Xác minh rằng tất cả các mục đều có trong gói hàng:
- 1x AC227-13 Radio Receiver
- 1x Quick-start guide (refer to this manual for detailed instructions)
Figure 2: The AC227-13 receiver alongside its product packaging, indicating a "Wall Type Radio Receiver".
4. Thông số kỹ thuật
| Thuộc tính | Chi tiết |
|---|---|
| Số hiệu mẫu | AC227-13 |
| Chế độ hoạt động | Điều khiển từ xa |
| Hoạt động Voltage | 24 Vôn (DC) |
| Loại đầu nối | Không dây |
| Phần cuối | Vít |
| Loại mạch | 1 chiều |
| Kiểu lắp đặt | Treo tường |
| Loại bộ truyền động | Hinge Lever or Push Button |
| Vật liệu liên hệ | Đồng |
| Số lượng vị trí | 3 |
| Tính thường xuyên | 433MHz |
| Đầu vào Voltage Phạm vi | 100-150VAC 60Hz / 190-240VAC 50Hz |
| Đầu ra Voltage / Hiện tại | 24VDC/4.5A (for 100-150VAC input) / 24VDC/7.0A (for 190-240VAC input) |
| Wind/Light/Rain Power | 12V DC/0.1A |
Hình 3: Chi tiết view of the receiver's back panel, showing the model number, input/output specifications, and CE marking.
5. Thông tin an toàn
Vui lòng tuân thủ các biện pháp phòng ngừa an toàn sau đây để tránh thương tích hoặc hư hỏng thiết bị:
- Luôn ngắt nguồn điện trước khi thực hiện bất kỳ thao tác lắp đặt, đấu dây hoặc bảo trì nào.
- Ensure all wiring is done by a qualified electrician and complies with local electrical codes.
- Không để thiết bị thu sóng tiếp xúc với hơi ẩm, nhiệt độ quá cao hoặc quá thấp hoặc ánh nắng trực tiếp.
- Để xa tầm tay trẻ em.
- Không tự ý mở hoặc sửa chữa thiết bị. Vui lòng liên hệ nhân viên có trình độ để được bảo dưỡng.
6. Thiết lập và Cài đặt
6.1 Lắp trên tường
The AC227-13 receiver is designed for easy wall mounting. Choose a suitable location near your garage door opener or gate control system, ensuring it is protected from environmental elements and within range of your transmitter.
- Identify a flat, stable surface for mounting.
- Use the receiver as a template to mark the positions for the mounting screws.
- Drill pilot holes if necessary, suitable for your mounting screws.
- Secure the receiver to the wall using appropriate screws (not included).
6.2 Hướng dẫn đấu dây
Refer to the wiring diagram below for proper connection. Ensure power is disconnected before wiring.
Figure 4: Detailed wiring diagram illustrating connections for DC motor, 12V power, control signals (GND, STOP, DOWN, UP), AC input (L, N), and external manual switch/wind/light/rain sensors.
- AC IN (L, N): Connect your 100-240VAC power supply to these terminals.
- CONTROL (GND, STOP, DOWN, UP): These terminals are for connecting external manual switches or sensors (e.g., wind, light, rain sensors).
- DC MOTOR (M+/-, M+/-): Connect your 24V DC motor to these terminals. Ensure correct polarity.
- 12V (12V, GND): Provides a 12V DC output for powering compatible external devices or sensors.
7. Hoạt động
7.1 Pairing with Transmitters
The AC227-13 receiver features a simple pairing process. Refer to your transmitter's manual for specific instructions on initiating pairing mode. Generally, you will need to press a pairing button on the receiver (often indicated by an LED) and then activate the desired button on your transmitter.
- Locate the pairing button on the receiver (often a small button near the LED indicator).
- Press and hold the pairing button until the LED indicator changes state (e.g., blinks rapidly).
- Within a few seconds, press the button on your 433MHz transmitter that you wish to pair.
- The LED on the receiver should confirm successful pairing (e.g., solid light, then off).
7.2 Kiểm soát cơ bản
Once paired, the receiver will respond to signals from your transmitter. The typical functions are:
Figure 5: Front panel of the AC227-13 receiver, highlighting the UP, STOP, and DOWN control buttons and the indicator light for setting.
- LÊN: Activates the motor to move the garage door or gate upwards.
- DỪNG LẠI: Dừng chuyển động của động cơ.
- XUỐNG: Activates the motor to move the garage door or gate downwards.
KHAI THÁC. Xử lý sự cố
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Bộ thu không phản hồi tín hiệu từ bộ phát. | Not paired, out of range, low transmitter battery, interference. | Re-pair the transmitter. Move closer to the receiver. Replace transmitter battery. Check for sources of 433MHz interference. |
| Đèn báo LED không sáng. | No power, faulty wiring. | Check power supply connections. Verify all wiring according to the diagram. |
| Motor not moving or moving incorrectly. | Incorrect motor wiring, motor fault, receiver fault. | Check motor connections for correct polarity. Test motor independently if possible. Contact support if issues persist. |
| Short range operation. | Obstructions, interference, receiver placement. | Ensure clear line of sight if possible. Relocate receiver to a more open area. Minimize sources of electronic interference. |
9. Bảo trì
The Rollerhouse AC227-13 receiver requires minimal maintenance:
- Giữ thiết bị sạch sẽ, không bụi bẩn. Dùng khăn mềm, khô để lau chùi.
- Kiểm tra định kỳ các mối nối dây điện để đảm bảo chúng chắc chắn.
- Avoid exposing the unit to harsh chemicals or abrasive cleaners.
10. Bảo hành và Hỗ trợ
Rollerhouse products are manufactured to high quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Rollerhouse webđịa điểm.
If you encounter any issues or have questions regarding the installation or operation of your AC227-13 receiver, please contact Rollerhouse customer support. Provide your product model number and a detailed description of the issue for faster assistance.
Để được hỗ trợ thêm, bạn có thể truy cập Rollerhouse Store on Amazon.
