Hướng dẫn sử dụng đèn hậu điện Spanninga Pimento XE

1. Sản phẩm hếtview

The Spanninga Pimento XE is a high-quality electric rear light designed for bicycles, featuring an integrated reflector for enhanced visibility. This light is specifically engineered to operate with a 6.36V DC power source, commonly found on e-bikes or dynamo systems. Its robust construction and IP67 waterproof rating ensure reliable performance in various weather conditions. The light is designed for easy mounting on a bicycle's rear luggage rack.

Hình 1: Mặt trước view of the Spanninga Pimento XE Electric Rear Light, showing the red light lens and the integrated rectangular reflector below it.

2. Thông tin an toàn

Please read all safety instructions carefully before installation and use. Failure to do so may result in injury or damage to the product.

• Khả năng hiển thị: Always ensure the light is clean and unobstructed to maximize visibility to other road users.
• Cài đặt: Improper installation can lead to the light detaching during riding. Ensure all mounting hardware is securely fastened. If unsure about electrical connections, consult a qualified bicycle mechanic.
• Kết nối điện: This light operates on 6.36V DC. Connecting it to an incompatible power source (e.g., higher voltage AC) may damage the light and pose a fire hazard.
• Khả năng chống nước: While the light is IP67 waterproof, avoid submerging it for extended periods or using high-pressure water jets directly on the unit.
• Phản xạ: The integrated reflector is a crucial safety feature. Keep it clean and free from dirt or damage.

3. Nội dung gói hàng

Khi mở gói hàng, vui lòng kiểm tra xem tất cả các thành phần đều có đầy đủ và không bị hư hỏng:

• Spanninga Pimento XE Electric Rear Light Unit
• Mounting Hardware (screws, nuts, washers for luggage rack attachment)

Note: Batteries are not included as this light is designed to be powered by your bicycle's electrical system.

4. Cài đặt

The Spanninga Pimento XE is designed for mounting on a standard bicycle luggage rack. Follow these steps for proper installation:

1. Chuẩn bị khu vực lắp đặt: Identify the two mounting holes on your bicycle's rear luggage rack, typically spaced for standard rear lights.
2. Định vị ánh sáng: Align the mounting holes on the back of the Pimento XE light with the holes on your luggage rack. Ensure the light is oriented correctly, with the reflector facing directly backward.

Hình 2: Trên cùng view of the Pimento XE light unit, highlighting the two screw holes for mounting to a luggage rack.
3. Bảo vệ ánh sáng: Insert the provided mounting screws through the light's holes and into the luggage rack. Secure with nuts and washers from the underside. Tighten firmly but do not overtighten to avoid damaging the plastic housing.


Hình 3: Dưới cùng view of the Pimento XE light unit, showing the two threaded posts for secure attachment to the bicycle's luggage rack.

4. Kết nối điện: Connect the light's wires to your bicycle's 6.36V DC power system. Ensure correct polarity (positive to positive, negative to negative) to prevent damage. If you are unsure about wiring, it is highly recommended to seek assistance from a professional bicycle mechanic.

5. Hoạt động

The Spanninga Pimento XE Electric Rear Light is designed for simple, reliable operation. Once properly installed and connected to your bicycle's 6.36V DC power system, the light will illuminate automatically when power is supplied (e.g., when your e-bike system is turned on or your dynamo is active). There is only one setting for this light, providing consistent rear illumination.

Hình 4: Mặt bênfile of the Pimento XE light, illustrating its compact design.

6. Bảo trì

To ensure the longevity and optimal performance of your Spanninga Pimento XE rear light, follow these simple maintenance guidelines:

• Vệ sinh: Regularly wipe the light lens and reflector with a soft, damp cloth to remove dirt and grime. Avoid abrasive cleaners or solvents, as they may damage the plastic.
• Kiểm tra kết nối: Periodically inspect the electrical connections to ensure they are secure and free from corrosion.
• Lắp đặt an ninh: Check the mounting screws regularly to ensure they remain tight. Retighten if necessary.
• Kiểm tra thiệt hại: Inspect the light for any cracks or damage to the housing or lens, which could compromise its waterproof integrity.

KHAI THÁC. Xử lý sự cố

If you encounter issues with your Spanninga Pimento XE light, refer to the following common troubleshooting steps:

• Đèn không bật:
  • Check the electrical connections to ensure they are secure and correctly wired to the 6.36V DC power source.
  • Verify that your bicycle's power system (e-bike battery, dynamo) is active and supplying power.
  • Inspect the wiring for any cuts or damage.
• Ánh sáng nhấp nháy:
  • This often indicates a loose electrical connection. Re-check all wiring connections.
  • Ensure the power source is stable and not fluctuating.
• Đầu ra ánh sáng mờ:
  • Clean the light lens and reflector thoroughly.
  • Kiểm tra xem nguồn điện có cung cấp đúng điện áp hay không.tage (6.36V DC).

If these steps do not resolve the issue, please contact Spanninga customer support or your local dealer.

8. Thông số kỹ thuật

9. Bảo hành và Hỗ trợ

For information regarding warranty coverage, technical support, or spare parts for your Spanninga Pimento XE Electric Rear Light, please refer to the official Spanninga website or contact your authorized Spanninga dealer. Keep your proof of purchase for any warranty claims.