Two Notes Torpedo C.A.B. M+ Speaker Simulator Pedal User Manual

1. Giới thiệu

The Two Notes Torpedo C.A.B. M+ is a versatile speaker simulator pedal designed for guitarists and bassists. It provides high-quality cabinet simulation, microphone placement options, and power amp simulation, allowing musicians to achieve studio-grade tones without traditional speaker cabinets. This device is ideal for silent practice, direct recording, and live performance setups where a physical cabinet is not practical or desired. The C.A.B. M+ also features a clean preamp and reverb capabilities, expanding its utility as a complete tone solution.

Hình ảnh: Mặt trước view of the Two Notes Torpedo C.A.B. M+ pedal, showcasing its display, control knobs, and front-facing inputs/outputs.

2. Thiết lập

Proper setup ensures optimal performance and sound quality from your Torpedo C.A.B. M+.

2.1. Kết nối nguồn điện

Connect the included 12VDC/200mA power supply to the 'POWER' input on the rear of the unit. Ensure the power supply matches the specified voltage và các yêu cầu hiện tại.

2.2. Kết nối âm thanh

The Torpedo C.A.B. M+ offers various input and output options for different setups:

• GTR / AMP TRONG: This input accepts signals from your guitar, pedalboard, or the speaker output of an amplifier. If connecting from an amplifier's speaker output, ensure a speaker cabinet is always connected to the amplifier's speaker output to prevent damage to the ampchất lót.
• LOA NGOÀI: If using the 'GTR / AMP IN' from an amplifier's speaker output, connect your speaker cabinet to this output. This acts as a pass-through for your amplifier's signal to the cabinet while the C.A.B. M+ processes a parallel signal.
• IN LEVEL Switch: Adjust this switch (-24dB AMP, 0dB, +12dB GTR) to match the input signal level. Use -24dB AMP vì amplifier speaker outputs, 0dB for line-level signals, and +12dB GTR for direct guitar/bass signals.
• DÒNG RA: A 1/4-inch unbalanced output for connecting to an audio interface, mixer, or other line-level devices.
• DI RA: A balanced XLR output for direct connection to a mixer or audio interface, providing a clean, low-noise signal. Use the 'GND LIFT' switch to eliminate ground hum if present.
• TRỢ VÀO: A 1/8-inch (3.5mm) stereo input for connecting external audio sources like a smartphone or music player for practice.
• Đầu ra tai nghe: A 1/8-inch (3.5mm) stereo output for silent practice with headphones.

Hình ảnh: Phía sau view of the Two Notes Torpedo C.A.B. M+ pedal, showing the power input, USB port, GTR/AMP IN, SPEAKER OUT, IN LEVEL switch, DI OUT, LINE OUT, AUX IN, and headphone jack.

2.3. Kết nối USB

Connect the C.A.B. M+ to your computer via the USB port for firmware updates and to use the Torpedo Wall of Sound software for deeper editing and access to additional cabinet models.

3. Operating the Torpedo C.A.B. M+

The C.A.B. M+ features an intuitive interface with a display and control knobs.

3.1. Kiểm soátview

• Núm xoay MENU: Navigates through menus and confirms selections. Press to enter a menu, turn to scroll.
• Núm xoay cài đặt sẵn: Selects different presets.
• PARAM Knob: Selects parameters within a menu.
• Núm điều chỉnh GIÁ TRỊ: Adjusts the value of the selected parameter.
• Nút NHẬP: Xác nhận lựa chọn hoặc vào menu phụ.

Image: Close-up of the Two Notes Torpedo C.A.B. M+ display, showing the 'Preamp: On' status, and the surrounding control knobs and buttons.

3.2. Core Functionalities

• Speaker Simulation (IR Loader): The C.A.B. M+ comes with a wide array of virtual cabinets and allows loading of custom Impulse Responses (IRs). Use the controls to select cabinets, microphones, and adjust microphone placement (distance, axis).
• Quyền lực Amp Mô phỏng: Simulate various power amp tubes (e.g., EL34, 6L6, KT88) and topologies to add realistic tube warmth and sag to your tone.
• Clean Preamp: The updated firmware includes a clean preamp, allowing the C.A.B. M+ to function as a complete pedal platform. Adjust gain and tone settings for a foundational clean sound.
• Hiệu ứng vang: Apply built-in reverb effects to add space and ambience to your sound.
• Cài đặt trước: Save and recall your favorite tone configurations using the preset system. The device supports numerous user presets.

3.3. Software Integration (Torpedo Wall of Sound)

For advanced control and access to the full library of Two Notes virtual cabinets and microphones, download and install the Torpedo Wall of Sound software on your computer. This software provides a graphical interface for detailed parameter editing, preset management, and purchasing/downloading new cabinet models.

Image: The Two Notes Torpedo C.A.B. M+ pedal connected to a tablet, demonstrating its compatibility with external control applications for enhanced user experience.

4. Bảo trì

To ensure the longevity and optimal performance of your Torpedo C.A.B. M+:

• Vệ sinh: Hãy dùng khăn mềm, khô để lau sạch bề mặt bên ngoài. Tránh sử dụng chất tẩy rửa có tính ăn mòn hoặc dung môi.
• Cập nhật chương trình cơ sở: Regularly check the Two Notes Audio Engineering website for firmware updates. Updates often include new features, improvements, and bug fixes. Connect the unit to your computer via USB and use the Torpedo Wall of Sound software to perform updates.
• Kho: Bảo quản thiết bị ở nơi khô ráo, thoáng mát, tránh ánh nắng trực tiếp và nhiệt độ cao.

KHAI THÁC. Xử lý sự cố

If you encounter issues with your Torpedo C.A.B. M+, refer to the following common solutions:

• Không có âm thanh phát ra:
  • Kiểm tra tất cả các kết nối cáp (đầu vào, đầu ra, nguồn).
  • Ensure the 'IN LEVEL' switch is set correctly for your input source.
  • Verify that the volume knob on the unit is turned up.
  • Nếu sử dụng một amplifier's speaker output, confirm a physical speaker cabinet is connected to the ampđầu ra loa của lifier.
• Tiếng ồn/Tiếng ù quá mức:
  • Use the 'GND LIFT' switch on the DI OUT to eliminate ground loops.
  • Ensure proper gain staging throughout your signal chain. High input levels or excessive gain settings on the C.A.B. M+ or subsequent devices can introduce noise.
  • Test with a different power supply if possible, ensuring it meets specifications.
• Đơn vị không phản hồi:
  • Ngắt kết nối và kết nối lại nguồn điện.
  • If connected to a computer, try restarting the Torpedo Wall of Sound software and reconnecting the USB cable.
• Preset Switching Delay:

  It is normal for there to be a noticeable delay when switching between presets. This is due to the processing required to load new cabinet and effect models. Plan your live use accordingly, typically by selecting a single preferred preset for a song or section.

For further assistance, consult the Two Notes Audio Engineering support resources online.

6. Thông số kỹ thuật

7. Bảo hành và Hỗ trợ

For detailed warranty information and to access technical support, please visit the official Two Notes Audio Engineering webĐịa điểm. Các website provides resources such as FAQs, firmware downloads, and contact information for customer service.