Anderic RRLC16.2

Anderic RRLC16.2 Universal Replacement Remote Control for Sharp Roku TVs

Model: RRLC16.2 | Brand: Anderic

Giới thiệu

This manual provides comprehensive instructions for the Anderic RRLC16.2 Universal Replacement Remote Control. Designed specifically for Sharp Roku TVs, this remote offers immediate functionality for compatible Sharp models without requiring any initial programming. It features dedicated shortcut keys for popular streaming services and a secure battery compartment for enhanced durability and safety. For other Roku TV brands or Roku Boxes, programming may be required.

Tính năng sản phẩm

  • Fully Universal: Compatible with all Roku TVs. Note: Not for Roku Streaming Sticks.
  • Uncompromised Quality: Engineered for superior performance and durability compared to original remotes.
  • Hoạt động dễ dàng: Works identically to the original remote for Sharp Roku TVs without complex setup. (Some shortcut keys may differ).
  • Quick Access to Streaming Services: Dedicated shortcut keys for NETFLIX, AMAZON, RDIO, and MGO provide instant access to these streaming platforms.
  • Ngăn chứa pin an toàn: Includes an optional screw to secure the battery cover, preventing accidental opening.

Cài đặt

1. Lắp pin

The Anderic RRLC16.2 remote requires two AAA batteries (not included). To install:

  1. Xác định vị trí ngăn chứa pin ở mặt sau của điều khiển từ xa.
  2. Trượt nắp pin xuống dưới để mở.
  3. Lắp hai pin AAA, đảm bảo lắp đúng cực (+ và -).
  4. Replace the battery cover by sliding it upwards until it clicks into place. For added security, use the optional screw to fasten the cover.
Mặt sau view of Anderic RRLC16.2 remote control showing the battery compartment with an optional screw for securing the cover.

Image: Back of the remote control, highlighting the battery compartment and optional screw.

2. Initial Use (Sharp Roku TVs)

For Sharp Roku TV models (e.g., LC-43LB371U, LC-43LB371UA, LC-43LB371UB, LC-50LB371U), the Anderic RRLC16.2 remote is pre-programmed and ready to use immediately after battery installation. No additional setup is required.

3. Programming for Other Roku TVs or Roku Boxes

If you are using the remote with other Roku TV brands (Hisense, Insignia, TCL, Hitachi) or a Roku Box, programming may be necessary. Refer to the "Programming Instructions (via Learning)" section below for detailed steps.

Hướng dẫn sử dụng

Đằng trước view of Anderic RRLC16.2 remote control showing all buttons including power, directional pad, OK, back, home, volume, mute, and streaming service shortcuts.

Hình ảnh: Mặt trước view of the Anderic RRLC16.2 remote control.

  • Nút nguồn (): Located at the top, press to turn your TV on or off.
  • Directional Pad (Purple Arrows) & OK Button: Use the arrow buttons to navigate menus and select options. Press the central "OK" button to confirm selections.
  • Nút quay lại (): Quay lại màn hình hoặc menu trước đó.
  • Nút Home (): Trở lại màn hình chính của Roku.
  • Volume & Mute Buttons: Located on the side of the remote. Use the volume up/down buttons to adjust audio levels and the mute button to silence audio.
  • Phát/Tạm dừng, Tua lại, Tua nhanh: Standard media control buttons for content playback.
  • Phím tắt: Dedicated buttons for NETFLIX, AMAZON, RDIO, and MGO provide instant access to these streaming platforms.

Khả năng tương thích

The Anderic RRLC16.2 remote control is designed for broad compatibility with Roku TVs. Please review the compatibility details below:

  • Pre-Programmed for Sharp Roku TV Models: LC-43LB371U, LC-43LB371UA, LC-43LB371UB, LC-50LB371U.
  • Compatible with Other Roku TV Brands (Requires Programming): Hisense, Insignia, TCL, Hitachi.
  • Compatible with Roku Box (Requires Programming).
  • NOT Compatible with Roku Streaming Sticks.
Compatibility chart for Anderic RR-LC-16.2 remote, showing checkmarks for Sharp Roku TV models and Roku Box (with note for programming), and an X for Roku Stick.

Image: Anderic RR-LC-16.2 Compatibility Chart.

Programming Instructions (via Learning)

This remote can be programmed to work with any TV via the learning method. This method does not require codes. Note: All keys on the RR-LC-16.2 may be learned. Original remote is needed.

  1. Nhấn và giữ (Trang chủ) và (Back) keys simultaneously for about 3 seconds. The indicator light will light up and remain on. Release the keys.
  2. Press and release the key to be learned. The indicator light will flash slowly.
  3. Point the original remote control head-to-head with the RR-LC-16.2, making sure the IR (infrared) light bulb at the top edge of the remote aligns directly with the lens on the front of the RR-LC-16.2, with a distance of about 3cm.
  4. Press and hold the key on the original remote that you want the RR-LC-16.2 to learn. The indicator light will flash 3 times to confirm and then remain on, waiting for the next entry.
  5. Lặp lại các bước 2-4 để tìm hiểu các phím khác.
  6. Nhấn (Home) to save and exit, or the remote will exit automatically after 20 seconds.

Đặt lại về trạng thái mặc định ban đầu

Nhấn và giữ (Trang chủ) và (Back) keys simultaneously for 3 seconds. The indicator will flash 3 times to confirm. Remote has successfully been reset to factory default status.

Xóa tất cả các khóa đã học

Nhấn và giữ (Trang chủ) và (Star) keys simultaneously for 3 seconds. The indicator will flash 3 times to confirm. All learned keys have been successfully deleted.

Detailed diagram of the Anderic RR-LC-16.2 remote control with programming instructions for various Roku TV brands and Roku Streaming Players.

Image: Anderic RR-LC-16.2 Advanced Universal Operating Guide with programming details.

Thông số kỹ thuật

Kích thước sản phẩm 5.75 x 1.75 x 1 inch
Trọng lượng sản phẩm 1.76 ounce
Số hiệu mẫu sản phẩm RRLC16.2
Pin Cần 2 pin AAA
Thương hiệu Anderic
Tính năng đặc biệt Phổ quát
Màu sắc Đen
Số lượng thiết bị được hỗ trợ tối đa 2
Thiết bị tương thích Streaming Device, Television

Xử lý sự cố

  • Điều khiển từ xa không phản hồi: Đảm bảo pin được lắp đúng cách và không bị cạn kiệt. Thay pin nếu cần thiết.
  • Đường ngắm: The remote operates using infrared (IR) technology. Ensure there is a clear line of sight between the remote and your TV's IR receiver.
  • Chức năng không chính xác: If buttons are not performing as expected, verify compatibility with your specific Roku TV model. For non-Sharp Roku TVs or Roku Boxes, ensure the remote has been correctly programmed using the learning method.
  • Shortcut Keys Not Working: While the remote is universal, some shortcut keys may differ from your original remote. Ensure your streaming apps are installed and updated on your Roku TV.

Bảo hành và Hỗ trợ

Anderic products are designed for quality and reliability. For any issues or support inquiries, please refer to the manufacturer's official webtrang web hoặc liên hệ với bộ phận chăm sóc khách hàng của họ. Giữ lại hóa đơn mua hàng để yêu cầu bảo hành.

Anderic is a registered trademark of Dan's Electronics Etc., Inc. All Rights Reserved. We are not affiliated with Roku. Roku is a registered trademark of Roku Inc.

Để được hỗ trợ, hãy truy cập: www.anderic.com

Tài liệu liên quan - RRLC16.2

Trướcview Anderic RRUR01.7 Universal 4-Device Remote Control User Manual & Programming Guide
Comprehensive guide for the Anderic RRUR01.7 universal remote, covering setup, programming codes for various devices (TV, VCR, DVD, Audio, Projector, STB), macro functions, and advanced features. Learn how to program and customize your remote for optimal control of your home entertainment system.
Trướcview Hướng dẫn sử dụng điều khiển từ xa đa năng Anderic RRU401.5
Hướng dẫn toàn diện về lập trình và sử dụng điều khiển từ xa đa năng Anderic RRU401.5, bao gồm thiết lập, các tính năng như macro và học tập, cùng danh sách mã mở rộng cho nhiều thiết bị khác nhau.
Trướcview Anderic RRST01.3 Advanced Universal Remote Control Operating Guide
Comprehensive guide to setting up and using the Anderic RRST01.3 universal remote control. Learn how to program it for Roku TVs, LG, and Vizio devices using codes or the learning function. Includes troubleshooting and optional accessory information.
Trướcview Anderic RR3720 Projector Universal Remote Control - Setup Guide and Code List
Comprehensive user guide for the Anderic RR3720 universal projector remote control, detailing setup procedures, code input methods, code search functionality, learning capabilities, and a complete list of compatible projector codes.
Trướcview Hướng dẫn sử dụng điều khiển từ xa đa năng 4 thiết bị Anderic RRU401.7
Hướng dẫn toàn diện về lập trình và sử dụng Điều khiển từ xa đa năng 4 thiết bị Anderic RRU401.7, bao gồm nhập mã, tự động tìm kiếm, khóa thiết bị, chức năng macro và cài đặt đèn nền.
Trướcview Hướng dẫn lập trình điều khiển từ xa đa năng Anderic RRUR01
Sách hướng dẫn này cung cấp hướng dẫn chi tiết về cách lập trình và vận hành điều khiển từ xa đa năng Anderic RRUR01. Sách bao gồm nhập mã, tìm kiếm tự động, phương pháp tìm kiếm bằng một nút bấm, khóa thiết bị, tính năng đục lỗ, chức năng học lệnh, điều chỉnh đèn nền và danh sách mã đầy đủ cho nhiều thương hiệu và loại thiết bị khác nhau.