Giới thiệu
This manual provides essential information for the safe installation, operation, and maintenance of your Lithonia Lighting Basics LED Emergency Light (Model EU2C M6). Please read these instructions thoroughly before installation and retain them for future reference. This emergency light is designed to provide reliable illumination during power outages in commercial and industrial settings.
Hướng dẫn an toàn quan trọng
Khi sử dụng thiết bị điện, cần luôn tuân thủ các biện pháp phòng ngừa an toàn cơ bản, bao gồm:
- Đọc và tuân thủ mọi hướng dẫn an toàn.
- Không sử dụng ngoài trời.
- Không lắp gần lò sưởi gas hoặc điện.
- Thiết bị phải được lắp ở những vị trí và độ cao mà thiết bị sẽ không dễ bị tác động của tampđược thực hiện bởi những người không được phép.
- Việc sử dụng thiết bị phụ trợ không được nhà sản xuất khuyến nghị có thể gây ra tình trạng không an toàn.
- Không sử dụng thiết bị này cho mục đích khác ngoài mục đích sử dụng đã định.
- Việc bảo dưỡng thiết bị này chỉ nên được thực hiện bởi nhân viên bảo dưỡng có chuyên môn.
- Ngắt kết nối nguồn AC trước khi bảo dưỡng.
Nội dung gói
Xác minh rằng tất cả các thành phần đều có sẵn trước khi bắt đầu cài đặt:
- LED Emergency Light Fixture
- Ống kính LED
- Phần cứng lắp đặt
- Pin sạc (đã lắp sẵn)
Thiết lập và cài đặt
The Lithonia Lighting Basics LED Emergency Light is designed for wall-mount installation only, compatible with universal J-box setups. Ensure all local and national electrical codes are followed during installation.
Mounting Location and Spacing
For optimal performance and code compliance, mount the fixture no higher than 8 feet from the floor. For adequate illumination along a 3-foot path of egress, fixtures should be spaced no farther apart than 14 feet. For a 6-foot path of egress, spacing should not exceed 11 feet. Always consult NFPA 101 Life Safety Code and local building codes for specific requirements.
Image: The Lithonia Lighting Basics LED Emergency Light, showing its dual adjustable LED lamp heads and compact design. This unit is ideal for small spaces and provides reliable emergency lighting.
Hướng dẫn đấu dây
The unit operates on either 120V or 277V AC input. Connect the appropriate power supply wires to the fixture's wiring. The internal rechargeable nickel-cadmium battery is typically pre-installed and connected. Ensure all connections are secure and insulated.
Video: Video này cung cấp mộtview of the Lithonia Lighting EU2C Emergency Light, demonstrating its features and suitability for various applications. It highlights the compact design and adjustable lamp đầu.
Video: This video offers a detailed product overview of emergency lighting, including discussions on code requirements, illumination standards, and proper fixture spacing to ensure life safety compliance. It compares different product families and their applications.
Sạc pin ban đầu
After installation and connecting to AC power, allow the unit to charge for a minimum of 24 hours to ensure the battery is fully charged and ready for emergency operation. The status indicator light will typically be green when charging and fully charged.
Hướng dẫn sử dụng
The Lithonia Lighting Basics LED Emergency Light operates automatically.
Hoạt động bình thường
When AC power is present, the unit's battery will be charging, and the status indicator light will be illuminated (typically green). The LED lamp heads will remain off.
Hoạt động khẩn cấp
Upon loss of AC power, the unit will automatically switch to battery backup mode, and the LED lamp heads will illuminate. The unit provides a minimum of 90 minutes of illumination during a power outage.
Test Switch and Status Indicator
A test switch is located on the front of the unit. Pressing this switch simulates a power outage, causing the LED lamp heads to illuminate, allowing for manual verification of battery and lamp functionality. The status indicator light provides visual confirmation of the unit's operational status (e.g., charging, fully charged, fault).
Hình ảnh: Cận cảnh view of the emergency light, highlighting the test switch and the status indicator light. These features allow for easy manual testing and provide visual feedback on the unit's operational state.
BẢO TRÌ
Regular maintenance ensures the continued reliability of your emergency light.
kiểm tra định kỳ
Perform a monthly 30-second test by pressing the test switch. The LED lamp heads should illuminate. Conduct an annual 90-minute discharge test to ensure the battery provides the required backup duration. Self-diagnostic models perform these tests automatically and indicate any faults.
Chăm sóc pin
The unit uses a long-lasting, maintenance-free nickel-cadmium battery. While designed for durability, batteries have a finite lifespan. If the unit fails to provide 90 minutes of illumination during an annual test after a full 24-hour charge, the battery may need replacement. Contact qualified service personnel for battery replacement.
Vệ sinh
Clean the exterior of the unit and lamp heads periodically with a soft, damp vải. Không sử dụng chất tẩy rửa có tính mài mòn hoặc dung môi.
Xử lý sự cố
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| đèn LED lamp heads do not illuminate during power outage or test. | No AC power, discharged battery, faulty battery, faulty lamp đầu. | Verify AC power. Allow 24-hour charge. Test battery. Replace battery or unit if necessary. |
| Status indicator light is off or red. | No AC power, battery fault, unit fault. | Verify AC power. Allow 24-hour charge. If fault persists, contact service personnel. |
| Short emergency run time. | Pin chưa được sạc đầy, pin đã cũ. | Ensure 24-hour charge. Replace battery if run time remains short. |
For issues not resolved by the above steps, contact qualified service personnel.
Thông số kỹ thuật
- Người mẫu: EU2C M6
- Thương hiệu: Ánh sáng Lithonia
- Kích thước: 10-1/8" W x 5-3/8" H x 3-3/4" D (25.7cm W x 13.7cm H x 9.5cm D)
- Nguồn điện: 120V/277V AC, 50/60Hz input; Internal rechargeable Nickel-Cadmium battery
- Công suất phát sáng: Dual adjustable 1W LED lamp heads, 5000K-9000K CCT, 90 Lumens
- Thời gian chạy khẩn cấp: Tối thiểu 90 phút
- Sự thi công: Injection-molded, flame-retardant thermoplastic housing
- Lắp đặt: Wall-mount only, universal J-box compatibility
- Nhiệt độ hoạt động: 50 ° F – 104 ° F (10 ° C – 40 ° C)
- Chứng nhận: UL Listed, NFPA 101, OSHA, FCC, NEC, CEC Title 20 compliant
Image: A diagram illustrating the dimensions of the Lithonia Lighting Basics LED Emergency Light, providing measurements for width, height, and depth for installation planning.
Bảo hành
This Lithonia Lighting product is covered by a 2-year limited warranty. For full warranty details, please refer to the documentation included with your product or visit the manufacturer's webđịa điểm.
Ủng hộ
For technical assistance, troubleshooting, or warranty claims, please contact Lithonia Lighting customer support. Contact information can typically be found on the product packaging or the official Lithonia Lighting webđịa điểm.
