Đèn pha LED Custom Dynamics PB-45-C Probeam Passing Lamps Hướng dẫn sử dụng

1. Giới thiệu

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Custom Dynamics PB-45-C 4.5in. Probeam LED Passing Lamps. These modern LED passing lamps are designed to enhance visibility and safety for your motorcycle.

2. Sản phẩm hếtview

The Custom Dynamics PB-45-C Probeam LED Passing Lamps feature a modern design with high lumen output for superior illumination. They are engineered for plug-and-play installation on most models.

Các tính năng chính:

• Modern LED passing lamp thiết kế
• Đầu ra 500 lumen
• Cài đặt cắm và chạy
• Cấu trúc chống thấm nước

Figure 2.1: Custom Dynamics PB-45-C Probeam LED Passing LampS. Những lamps feature a sleek, round design with a chrome finish and clear lens, showcasing the internal LED components.

3. Thông tin an toàn

CẢNH BÁO: Sản phẩm này có thể khiến bạn tiếp xúc với các hóa chất bao gồm chì, được Tiểu bang California biết đến là nguyên nhân gây ung thư và dị tật bẩm sinh hoặc các tác hại sinh sản khác. Để biết thêm thông tin, hãy truy cập www.P65Warnings.ca.gov.

Always ensure the vehicle's power is disconnected before installation. Consult a qualified technician if you are unsure about any installation steps. Wear appropriate safety gear during installation.

4. Thiết lập và Cài đặt

The PB-45-C lamps are designed for plug-and-play installation. Follow these general steps for installation:

1. Ensure the motorcycle's ignition is off and the battery is disconnected to prevent electrical shorts.
2. Carefully remove the existing passing lamps from your motorcycle, if applicable.
3. Connect the Custom Dynamics PB-45-C lamps to the motorcycle's wiring harness. For models manufactured before 2004, an adapter (part number 2001-1266) is required and sold separately.
4. Securely mount the new LED passing lamps in the designated locations.
5. Reconnect the battery and test the functionality of the new lamps.
6. Điều chỉnh lamp angle for optimal beam pattern and visibility.

For detailed vehicle-specific instructions, refer to your motorcycle's service manual.

5. Hoạt động

Once installed, the Probeam LED Passing Lamps operate in conjunction with your motorcycle's existing lighting system. They are designed to provide additional forward and side illumination, enhancing your visibility to other road users and improving your view của con đường.

• Turn on your motorcycle's ignition and headlight switch to activate the passing lamps.
• Ensure both lamps chiếu sáng đúng cách.
• Periodically check the alignment of the lamps to ensure they are providing optimal light distribution without blinding oncoming traffic.

6. Bảo trì

The Custom Dynamics PB-45-C LED Passing Lamps require minimal maintenance due to their durable LED technology and waterproof design.

• Vệ sinh: Làm sạch ống kính bằng vải mềm, damp cloth and mild soap. Avoid abrasive cleaners or solvents that could damage the lens or housing.
• Điều tra: Periodically inspect the wiring and connections for any signs of wear, corrosion, or damage. Ensure mounting hardware remains secure.
• Con dấu chống thấm nước: Do not attempt to open the sealed lamp housing, as this will compromise its waterproof integrity and void the warranty.

KHAI THÁC. Xử lý sự cố

8. Thông số kỹ thuật

9. Bảo hành và Hỗ trợ

For warranty information and technical support, please contact Custom Dynamics directly. Refer to their official website or the product packaging for the most current contact details and warranty policy.

Webđịa điểm: www.customdynamics.com