Global Fabric Task Chair 9326BK-JN01 User Manual

Thông tin an toàn quan trọng

For safe use, ensure the chair is fully assembled and all fastenings are secure. This chair has a maximum weight capacity of 250 lbs. and meets or exceeds ANSI/BIFMA standards. Always check the chair for stability before use.

• Không vượt quá sức nặng tối đa 250 lbs.
• Regularly inspect all bolts and screws for tightness. Retighten as necessary.
• Không được đứng trên ghế.
• Use the chair only for its intended purpose as an office task chair.

Sản phẩm trênview

The Global Fabric Task Chair 9326BK-JN01 is designed for office environments, providing comfort and support. Key features include built-in lumbar support, an armless design for versatility, and a pneumatic seat-height adjustment system.

An image of the Global Fabric Task Chair, model 9326BK-JN01, in navy fabric. The image displays the overall dimensions: 17.5 inches to 22.5 inches in height, 25 inches in depth, and 22 inches in width at the base.

Đặc trưng:

• Navy fabric upholstery for durability and appearance.
• Built-in lumbar support to reduce back tension.
• Pneumatic seat-height adjustment for customizable seating positions.
• Armless design for easy movement and space-saving under desks.
• Twin-wheel carpet casters for mobility on various surfaces.
• Rated for up to 250 lbs. based on an 8-hour workday.

Setup / Assembly Instructions

Partial assembly is required for this task chair. The assembly process is designed to be straightforward and typically does not require specialized tools.

Các bước lắp ráp:

1. Giải nén các thành phần: Cẩn thận lấy tất cả các bộ phận ra khỏi bao bì. Kiểm tra xem có đầy đủ các thành phần được liệt kê trong danh sách đóng gói không.
2. Gắn bánh xe vào đế: Insert the twin-wheel carpet casters into the holes at the end of each leg of the chair base. Push firmly until they click into place.
3. Chèn Gas Lift: Đặt xi lanh nâng khí vào lỗ ở giữa của đế ghế đã lắp ráp.
4. Gắn ghế vào bộ nâng khí nén: Carefully place the seat assembly onto the top of the gas lift cylinder. Ensure it is centered and fully seated.
5. Gắn tựa lưng: Secure the backrest to the seat mechanism using the provided hardware. Ensure all screws are tightened securely.
6. Kiểm tra cuối cùng: Trước khi sử dụng, hãy đảm bảo tất cả các kết nối đều chắc chắn và ghế ở vị trí ổn định.

Hướng dẫn sử dụng

Điều chỉnh chiều cao ghế bằng khí nén:

• ĐẾN nâng lên the seat: While seated, lift the adjustment lever located under the right side of the seat. The seat will rise. Release the lever at the desired height.
• ĐẾN thấp hơn the seat: While seated, lift the adjustment lever. Apply slight body weight to the seat. The seat will lower. Release the lever at the desired height.

Chair Mobility:

The chair is equipped with twin-wheel carpet casters, allowing for easy movement across carpeted and hard floor surfaces. Ensure the path is clear of obstructions before moving the chair.

Bảo trì và chăm sóc

• Vải lau: For general cleaning, spot clean the fabric with a mild detergent and a damp cloth. Avoid saturating the fabric. Test any cleaning solution on an inconspicuous area first.
• Vệ sinh khung: Wipe the plastic and metal components with a soft, damp vải.
• Kiểm tra thường xuyên: Periodically check all screws and bolts to ensure they remain tight. Retighten as needed to maintain stability and safety.
• Tránh các hóa chất mạnh: Do not use abrasive cleaners, solvents, or strong chemical agents, as these can damage the chair's materials.

Xử lý sự cố

• Ghế không ổn định: Ensure all assembly screws are fully tightened. Check that the gas lift is properly seated in the base and seat mechanism.
• Difficulty adjusting seat height: Verify that the adjustment lever is functioning correctly and not obstructed. Ensure the gas lift cylinder is not damaged.
• Tiếng kêu cót két: Apply a small amount of silicone-based lubricant to moving parts or connection points, particularly where the seat and backrest attach to the mechanism.
• Bánh xe không lăn trơn tru: Check casters for accumulated debris (hair, lint) and clean as necessary. Ensure casters are fully inserted into the base.

Thông số kỹ thuật

Thông tin bảo hành

This Global Fabric Task Chair 9326BK-JN01 comes with a Bảo hành trọn đời có giới hạn. This warranty covers defects in materials and workmanship under normal use. For specific details regarding coverage, limitations, and how to make a warranty claim, please refer to the official Global warranty documentation or contact Global customer support.

Thông tin liên lạc

For further assistance, technical support, or warranty inquiries, please contact Global customer service:

• Webđịa điểm: www.globalfurnituregroup.com (Vui lòng tham khảo chính thức web(Vui lòng truy cập trang web để biết thông tin liên hệ cập nhật nhất.)
• Điện thoại: Tham khảo hướng dẫn của nhà sản xuất. webtrang web cho các số liên lạc khu vực.