Hướng dẫn sử dụng bộ đàm video VIMAR
Mẫu: K40910
1. Giới thiệu
This manual provides comprehensive instructions for the installation, operation, and maintenance of your VIMAR Single-Family Video Door Entry Kit. This kit is designed to enhance security and communication for your home, featuring a hands-free monitor and a robust outdoor entrance panel.
The kit includes a 7-inch color LCD TFT monitor (Model Elvox K40912) with a capacitive-touch keypad for intuitive control, and a metal surface-mounting audio/video entrance panel (Model Elvox 40920 P1) equipped with a wide-angle camera and night vision capabilities. A multi-plug power supply is also included for convenience.
Please read this manual thoroughly before installation and use to ensure proper functioning and to maximize the lifespan of your product.
2. Thông tin an toàn
Always adhere to local electrical codes and regulations during installation. Installation should only be performed by qualified personnel.
- Ngắt kết nối nguồn: Always disconnect power to the installation area before beginning any wiring or maintenance work.
- Dây điện: Use only the specified 2-core non-polarized wire for connections. Ensure all connections are secure and properly insulated.
- Điều kiện môi trường: The outdoor panel is designed for outdoor use (IP44, IK07 rated), but avoid direct exposure to extreme weather conditions beyond its operating temperature range (-25°C to +55°C).
- Vệ sinh: Do not use abrasive cleaners or solvents on any part of the system. Use a soft, damp vải để lau chùi.
- Sửa đổi: Do not attempt to modify or repair the unit yourself. Refer all servicing to qualified service personnel.
3. Nội dung gói hàng
Hãy kiểm tra xem tất cả các vật dụng được liệt kê bên dưới có đầy đủ trong bộ dụng cụ của bạn hay không:
- 1x Surface Mounting Hands-Free Video Entryphone Monitor (Elvox K40912)
- 1x Metal Surface Mounting Audio/Video Entrance Panel (Elvox 40920 P1)
- 1x EU/BS/UK/AU Multi-plug Power Supply
- Phụ kiện lắp đặt (ốc vít, tắc kê tường)
- Hướng dẫn sử dụng (tài liệu này)
Hình 3.1: Quaview of the VIMAR Video Intercom Kit components as packaged.
4. Thiết lập và Cài đặt
This section outlines the steps for installing your video intercom system.
4.1 Yêu cầu về hệ thống dây điện
- Only a 2-core non-polarized wire is required for the entire wiring of the kit.
- Maximum distance between the entrance panel and the last monitor is 100m when using a 2x1mm² cable.
4.2 Mở rộng hệ thống
- Up to 3 Elvox K40912 monitors can be connected per entrance panel.
- Up to 2 Elvox 40920 P1 entrance panels can be connected to the system.
4.3 Electric Door Lock Connection
A 12VDC (2A for 0.5-10s) electric door lock (not included) can be connected directly to the entrance panel without requiring additional hardware.
Hình 4.1: Example of the outdoor entrance panel installed on a wall.
Hình 4.2: Example of the indoor monitor installed on a wall.
Hình 4.3: Wiring diagram and system overview from the product packaging. Refer to the detailed installation guide for specific wiring instructions.
5. Hướng dẫn vận hành
This section details the functions and operation of your VIMAR video intercom system.
5.1 Monitor Functions (Elvox K40912)
The 7-inch LCD TFT display monitor features a capacitive-touch keyboard for various functions:
- Talk/Listen: Initiate and end conversations with visitors at the entrance panel.
- Door Lock Release: Remotely unlock the connected electric door lock.
- Automated Gate Opening: Activate automated gate systems (if connected).
- Ringtone Mute: Silence the incoming call ringtone.
- Cuộc gọi nội bộ: Make calls between multiple connected indoor monitors.
The monitor also includes an electronic ringtone with various melodies and controls for display brightness, contrast, and color settings.
Hình 5.1: The monitor displaying a live video feed from the entrance panel camera.
5.2 Entrance Panel Functions (Elvox 40920 P1)
The entrance panel is equipped with a wide-angle camera (120° horizontal coverage, 1000 TV line resolution) and white LEDs for clear night vision. It features a single call button and a large backlit nameplate holder.
6. Bảo trì
Việc bảo trì thường xuyên đảm bảo tuổi thọ và hiệu suất tối ưu cho hệ thống liên lạc nội bộ bằng video của bạn.
- Vệ sinh màn hình: Sử dụng khăn mềm, khô, không xơ vải để lau màn hình và các bộ phận khác.asing. Đối với các vết bẩn cứng đầu, hãy nhẹ nhàng...ampen the cloth with water. Avoid spraying liquids directly onto the monitor.
- Cleaning the Entrance Panel: Wipe the exterior of the entrance panel with a soft, damp cloth. Ensure the camera lens and LED lights are free from dirt and obstructions for clear visibility.
- Kiểm tra: Periodically check all visible wiring for any signs of wear or damage. Ensure all connections remain secure.
KHAI THÁC. Xử lý sự cố
If you encounter issues with your VIMAR video intercom kit, refer to the following common troubleshooting steps:
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Không có hình ảnh trên màn hình | Power supply issue, loose wiring, camera obstruction, monitor settings. | Check power connection. Verify all wiring connections are secure. Ensure camera lens is clean and unobstructed. Adjust monitor brightness/contrast. |
| Không có âm thanh hoặc chất lượng âm thanh kém | Microphone/speaker obstruction, loose wiring, volume settings. | Check for obstructions on microphone/speaker grilles. Verify wiring. Adjust volume settings on the monitor. |
| Door lock not releasing | Incorrect wiring to door lock, faulty door lock, insufficient power. | Verify door lock wiring according to diagram. Test door lock independently if possible. Ensure power supply meets specifications for the lock. |
| Intercom calls not working | Incorrect monitor ID settings, wiring issues between monitors. | Check monitor ID settings as per installation guide. Verify wiring between all indoor monitors. |
Nếu sự cố vẫn tiếp diễn sau khi đã thử các giải pháp này, vui lòng liên hệ với bộ phận hỗ trợ khách hàng.
8. Thông số kỹ thuật
Detailed technical specifications for the VIMAR Video Intercom Kit:
| Tính năng | Sự miêu tả |
|---|---|
| Số hiệu mẫu | K40910 |
| Monitor (Elvox K40912) | 7" Color LCD TFT (800x420 pixels), Hands-free, Capacitive-touch keypad |
| Monitor Dimensions (W x H x D) | 205.2mm x 128.1mm x 20.9mm |
| Entrance Panel (Elvox 40920 P1) | Metal surface mounting, Wide-angle camera (120° H), 1000 TVL resolution, White LEDs for night vision, 1 call button, Backlit nameplate holder |
| Entrance Panel Dimensions (W x H x D) | 94.4mm x 162.4mm x 34.3mm |
| Protection Rating (Panel) | IP44 (weather protection), IK07 (impact protection) |
| Operating Temperature (Panel) | -25°C đến +55°C |
| Dây điện | 2-core non-polarized wire |
| Max. Distance (Panel to Monitor) | 100m (with 2x1mm² cable) |
| Khả năng mở rộng | Up to 3 monitors (K40912) per panel, up to 2 panels (40920 P1) |
| Compatible Door Lock | 12VDC (2A for 0.5-10s) electric door lock (not included) |
Hình 8.1: Monitor dimensions (in mm).
Hình 8.2: Entrance Panel dimensions (in mm).
9. Bảo hành và Hỗ trợ
VIMAR products are manufactured to high quality standards. This product comes with a Bảo hành 3 năm kể từ ngày mua, bao gồm cả lỗi sản xuất.
For technical assistance, troubleshooting, or warranty claims, please contact VIMAR customer support.
- Số điện thoại hỗ trợ khách hàng: 0424 488 500 (for Italy)
- Nhà sản xuất: VIMAR
- Mã UPC của sản phẩm: 8013406306241
Hình 9.1: Warranty information displayed on the product packaging.
Hình 9.2: Customer support contact information on the product packaging.
