1. Giới thiệu
The StarTech.com RKCONS1901 is a 1U rack-mount KVM console designed to provide complete keyboard, monitor, and mouse control for a single server or multiple servers when connected through a separate KVM switch (sold separately). This space-efficient solution features a built-in 19-inch LCD display, a full keyboard, and a touchpad, all housed within a durable steel drawer that slides into 1U of rack space.
2. Có gì trong hộp
- Bảng điều khiển KVM
- 6 ft [1.8 m] KVM cable
- Đai ốc lồng M5
- Vít M5
3. Thiết lập và Cài đặt
Follow these steps to properly install your StarTech.com RKCONS1901 KVM Console into a server rack and connect it to your equipment.
3.1 Gắn giá đỡ
The KVM console is designed to fit into a standard 1U rack space. Ensure your rack has sufficient depth and mounting points.
- Slide the KVM console into the desired 1U rack space.
- Secure the console to the rack using the provided M5 cage nuts and M5 screws. Ensure both sides are firmly attached to prevent movement.
Figure 1: KVM Console in closed position, ready for rack mounting.
3.2 kết nối cáp
Connect the necessary cables to the rear of the KVM console and your server or KVM switch.
- Connect the provided 6 ft [1.8 m] KVM cable to the single port on the rear of the KVM console.
- Connect the other end of the KVM cable to the VGA and USB ports of your server or KVM switch.
- Connect the power cable to the KVM console and a power outlet.
Hình 2: Phía sau view of the KVM Console with connection ports.
3.3 Video hướng dẫn cài đặt
For a visual guide on the installation process, refer to the following video:
Video 1: This video demonstrates the installation of a 19-inch Rack Mount VGA KVM Console into a server rack, showing the physical mounting and initial setup steps.
4. Hướng dẫn vận hành
Once installed and connected, the KVM console is ready for operation.
4.1 Opening and Closing the Console
- To open the console, pull the handle to slide the drawer out of the rack.
- Lift the LCD panel to an upright position.
- To close, fold down the LCD panel and push the drawer back into the rack until it locks securely.
Figure 3: KVM Console in open position, ready for use.
4.2 Sử dụng Bàn phím và Bàn di chuột
The integrated keyboard features 99 keys, including a numeric keypad, and the touchpad provides intuitive cursor control.
4.3 Điều hướng Menu OSD
The On-Screen Display (OSD) menu allows you to adjust monitor settings such as brightness, contrast, and color. Use the buttons located below the LCD panel to navigate the OSD menu.
Video 2: This video provides an introduction to a rack mount KVM monitor switch, demonstrating its basic operation, OSD menu navigation, and switching capabilities.
5. Bảo trì
To ensure the longevity and optimal performance of your KVM console, follow these maintenance guidelines:
- Vệ sinh: Use a soft, lint-free cloth to clean the LCD screen and exterior surfaces. For stubborn marks, dampen the cloth with a mild, non-abrasive cleaner. Avoid spraying liquids directly onto the console.
- Thông gió: Ensure proper airflow around the console. Do not block ventilation openings.
- Quản lý cáp: Keep cables neatly organized to prevent damage and ensure smooth operation of the sliding drawer.
- Điều kiện môi trường: Operate the console within the specified temperature range of 0 to 40 degrees Celsius.
KHAI THÁC. Xử lý sự cố
If you encounter issues with your KVM console, refer to the following common troubleshooting steps:
- Không hiển thị: Check all video cable connections. Ensure the server or KVM switch is powered on and outputting a video signal. Verify the console's power adapter is securely connected.
- Bàn phím/Chuột không phản hồi: Check all USB cable connections. Ensure the server or KVM switch recognizes the USB devices. Try connecting the KVM cable to a different USB port on the server/switch.
- Console Not Sliding Smoothly: Inspect the slide rails for any obstructions or damage. Ensure the rack mounting screws are not overtightened, which could impede movement.
- Độ phân giải màn hình không chính xác: Access the OSD menu to adjust display settings. Ensure your server's video output is configured to a resolution supported by the 19-inch LCD (up to 1280x1024).
7. Thông số kỹ thuật
| Tính năng | Đặc điểm kỹ thuật |
|---|---|
| Số hiệu mẫu | RKCONS1901 |
| Thương hiệu | StarTech.com |
| Chiều cao giá đỡ | 1U |
| Kích thước hiển thị | 19 inch |
| Kiểu hiển thị | Active Matrix TFT LCD |
| Max Resolution | 1280x1024 |
| Bàn phím | 99-key full keyboard with numeric keypad |
| Thiết bị trỏ | Bàn di chuột |
| Giao diện video | VGA |
| Hỗ trợ USB | Đúng |
| Nhiệt độ hoạt động | Từ 0 đến 40 độ C |
| MTBF | 50,000 giờ |
| Kích thước sản phẩm (DxRxC) | 21 x 19 x 1.7 inch |
| Trọng lượng sản phẩm | 26.8 pound |
8. Bảo hành và Hỗ trợ
The StarTech.com RKCONS1901 is backed by a StarTech.com warranty. For specific warranty details and technical support, please refer to the official StarTech.com webtrang web hoặc liên hệ trực tiếp với bộ phận dịch vụ khách hàng của họ. Giữ lại biên lai mua hàng để yêu cầu bảo hành.
