Giới thiệu
The Apogee MiC Plus is a studio-quality USB microphone designed for pristine sound capture. It features a cardioid condenser mic capsule, a built-in mic pre-amp, and a zero-latency headphone output, making it ideal for recording vocals, podcasts, and instruments on various platforms including macOS, iOS, and Windows.
Figure 1: Apogee MiC Plus with included desktop tripod.
Có gì trong hộp
- Apogee MiC Plus Microphone
- Lightning iOS cable
- Cáp USB-C
- Cáp USB-A
- Chân máy tính để bàn
- Kẹp micro
Figure 2: Contents of the Apogee MiC Plus package.
Cài đặt
Kết nối với thiết bị của bạn
- Chọn cáp phù hợp: Select the appropriate cable for your device. Use the Lightning cable for iOS devices, and either the USB-C or USB-A cable for computers (macOS or Windows).
- Connect the MiC Plus: Plug the micro-USB end of the chosen cable into the MiC Plus.
- Kết nối với thiết bị: Plug the other end of the cable into your computer or iOS device.
- Bật nguồn: The MiC Plus is bus-powered and will power on automatically when connected. The status LED will illuminate.
Figure 3: MiC Plus connected to a laptop for recording.
Giám sát tai nghe
The MiC Plus features a powerful headphone output with a blend feature for zero-latency monitoring. This allows you to hear your input signal directly without any delay, which is crucial for accurate recording.
- Kết nối tai nghe: Plug your headphones into the 3.5mm headphone jack on the MiC Plus.
- Adjust Blend: Use the control knob on the MiC Plus to adjust the blend between your input signal (microphone) and playback from your device. This ensures you can monitor your performance clearly.
Figure 4: Close-up of the MiC Plus ports, including the headphone jack.
Operating the MiC Plus
Kiểm soát tăng
The MiC Plus features 46dB of mic preamp gain, digitally controlled for greater precision. This allows you to set the optimal input level for your recordings.
- Điều chỉnh mức tăng: Use the control knob on the MiC Plus to increase or decrease the microphone's input gain. Monitor the input levels in your recording software to avoid clipping (distortion).
- Chức năng tắt tiếng: To mute the microphone, press the control knob in. The status LED will change to indicate mute status.
Figure 5: The control knob on the MiC Plus for gain adjustment and muting.
Recording with "First Take" Application
"First Take" is a free podcast recording application that allows you to connect up to 4 different Apogee mics to a single computer or USB Hub. It simplifies the podcast recording process.
Video 1: Introduction to First Take, demonstrating multi-mic podcast recording with Apogee microphones.
- Install First Take: Download and install the "First Take" application on your compatible computer.
- Kết nối Micro: Connect your Apogee MiC Plus (and up to three other compatible Apogee mics) to your computer or a USB hub.
- Launch First Take: Open the application. It will automatically detect connected Apogee microphones.
- Điều chỉnh mức độ: Use the individual faders within the "First Take" interface to set the recording levels for each microphone.
- Bắt đầu ghi âm: Click the "REC" button to begin your podcast recording.
- Truy cập bản ghi: Your recordings will be saved and can be accessed directly from within the "First Take" application.
Figure 6: Multiple MiC Plus units used for a podcast recording session.
BẢO TRÌ
- Vệ sinh: Use a soft, dry cloth to clean the exterior of the MiC Plus. Do not use liquid cleaners or solvents.
- Kho: When not in use, store the MiC Plus in a protective case or bag to prevent dust and damage.
- Chăm sóc cáp: Handle cables carefully. Avoid sharp bends or kinks that can damage the internal wiring.
Xử lý sự cố
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Không có âm thanh từ micrô | Incorrect cable connection, software input not selected, microphone muted, low gain. | Ensure cables are securely connected. Check your recording software's audio input settings to confirm MiC Plus is selected. Press the control knob to unmute. Increase gain. |
| Âm thanh bị biến dạng | Mức khuếch đại đầu vào quá cao (gây méo tiếng). | Reduce the input gain using the control knob on the MiC Plus or within your recording software. |
| Không có âm thanh từ tai nghe | Headphones not connected, headphone volume too low, blend knob setting. | Ensure headphones are fully plugged in. Adjust headphone volume on your device or the MiC Plus. Check the blend knob to ensure you are monitoring the correct source. |
| Thiết bị không nhận diện được micro. | Driver issue (Windows), incompatible device, faulty cable. | Try a different USB port or cable. For Windows, ensure drivers are up to date (usually plug-and-play, but check Apogee's website if issues persist). Verify device compatibility. |
Thông số kỹ thuật
- Tên mẫu: Apogee MiC Plus
- Thương hiệu: Đỉnh cao
- Loại micrô: Máy ngưng tụ tim mạch
- Mẫu cực: Đơn hướng
- Công nghệ kết nối: USB
- Giao diện phần cứng: USB 2.0
- Độ nhạy âm thanh: 94 dB
- Tỷ lệ tín hiệu trên tạp âm: 46 dB
- Đáp ứng tần số: 20 Hz - 20 KHz
- Độ sâu bit / Sample Tỷ lệ: Lên đến 24-bit/96kHz
- Nguồn điện: Hỗ trợ cổng USB
- Thiết bị tương thích: Smartphone, Tablet, macOS (OS X 10.9 or later), Windows (Windows 10)
- Trọng lượng sản phẩm: 1 pound (khoảng 0.45 kg)
- Kích thước sản phẩm (D x R x C): 5.02 x 2.13 x 7.8 inch (khoảng 12.75 x 5.41 x 19.81 cm)
- Nhà sản xuất: Tập đoàn điện tử Apogee
- UPC: 805676302034
Bảo hành và Hỗ trợ
Apogee products are known for their quality and reliability. For detailed warranty information and technical support, please refer to the official Apogee webtrang web hoặc tài liệu đi kèm với sản phẩm của bạn.
Bạn cũng có thể tìm thấy các tài nguyên bổ sung và Câu hỏi thường gặp trên Apogee Store on Amazon hoặc tải xuống Hướng dẫn sử dụng (PDF) để biết thông tin chi tiết.
For customer service inquiries related to your purchase, please contact the seller, Apogee Electronics Corp., directly through Amazon's platform.