1. Giới thiệu
This manual provides detailed instructions for the installation, operation, and maintenance of your AIBOO Linkable Under Cabinet LED Lighting Kit. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Nội dung gói hàng
Xác minh rằng tất cả các thành phần được liệt kê dưới đây đều có trong gói của bạn:
- 10 x 12V LED Under Cabinet Puck Lights
- 1 x LED Hardwired Transformer with Wall Plug (AC120 to DC12V)
- 1 x Distributor (6-way splitter)
- 1 x Wireless RF Remote Controller (including a receiver and a remote)
- 4 x Extension Cables (5ft each)
- 10 x Double-Sided Adhesive Stickers
- 20 x Vít
3. Thông số kỹ thuật
| Tính năng | Đặc điểm kỹ thuật |
|---|---|
| Thương hiệu | AIBOO |
| Số hiệu mẫu | YK-300000197 |
| Màu sáng | Trắng ấm |
| Nhiệt độ màu | 2700 độ Kelvin |
| Thông lượng sáng | 1000 Lumen (Total for 10 lights) |
| Cái gì?tage | 20.00 Watts (Total for 10 lights) |
| Tậptage | 12 vôn |
| Puck Light Dimensions (L x W x H) | 2.36 x 2.36 x 0.31 inch (6 x 6 x 0.8 cm) |
| Nguồn điện | Corded Electric (Hardwired or Wall Plug-in) |
| Phương pháp kiểm soát | Wireless RF Remote Control |
| Tính năng đặc biệt | Dimmable, Linkable (Series Connection) |
| Sử dụng trong nhà/ngoài trời | Trong nhà |
| Mức độ chống nước | Không chống nước |
| Pin cần thiết (cho điều khiển từ xa) | 1 pin CR2 (đi kèm) |
4. Thiết lập và Cài đặt
The AIBOO Linkable Under Cabinet LED Lighting Kit offers two installation methods: hardwired or wall plug-in. Choose the method that best suits your needs.
4.1. Các bước cài đặt chung
- Bố cục kế hoạch: Determine the desired placement for each puck light under your cabinets or shelves. Ensure the cables can reach the distributor and power source.
- Đèn núi Puck:
- Phương pháp dán: Clean the mounting surface thoroughly. Peel the backing from the double-sided adhesive sticker and firmly press it onto the back of the puck light. Then, press the light onto the desired surface.
- Phương pháp bắt vít: Use the provided screws to secure the puck lights to the desired surface. Ensure the screws are tightened securely but do not overtighten.
- Connect Lights to Distributor: Connect the cables from each puck light to the 6-way distributor. Use the 5ft extension cables as needed to bridge longer distances between lights or to the distributor. The linkable design allows for simple wiring management.
- Connect Distributor to Receiver: Plug the distributor into the wireless RF remote receiver.
- Connect Receiver to Power Adapter: Plug the receiver into the 12V LED hardwired transformer/wall plug-in adapter.
- Kết nối nguồn điện:
- Wall Plug-in: Plug the power adapter into a standard AC120V wall outlet.
- Có dây cứng: For hardwired installations, consult a qualified electrician. Ensure power is disconnected before attempting any hardwiring.
5. Hướng dẫn vận hành
The lighting kit is controlled by a wireless RF remote control, allowing for convenient operation.
5.1. Chức năng điều khiển từ xa
- BẬT/TẮT: Press the "ON" button to turn the lights on, and "OFF" to turn them off.
- Điều chỉnh độ sáng:
- "LIGHT +" / "BRIGHT +": Increases brightness.
- "LIGHT -" / "BRIGHT -": Decreases brightness.
- Preset levels: Buttons for 100%, 50%, and 25% brightness.
- Ghép nối: If the remote does not control the lights, press "Pair" or "Decode" until the lights flicker. This indicates successful pairing.
- Cài đặt thời gian: Buttons for 1H, 2H, 4H, and 8H allow you to set an automatic shut-off timer for 1, 2, 4, or 8 hours respectively.
6. Bảo trì
To ensure the longevity and optimal performance of your AIBOO LED lighting kit, follow these maintenance guidelines:
- Vệ sinh: Disconnect power before cleaning. Use a soft, dry cloth to gently wipe the puck lights and other components. Avoid abrasive cleaners, solvents, or excessive moisture, as these can damage the product.
- Quản lý cáp: Periodically check all cable connections to ensure they are secure. Avoid placing heavy objects on cables or bending them sharply, which can cause damage.
- Pin từ xa: If the remote control's range or responsiveness decreases, replace the CR2 battery. Refer to the remote's battery compartment for instructions on replacement.
- Điều kiện môi trường: This product is designed for indoor use only. Avoid exposure to water, high humidity, or extreme temperatures.
KHAI THÁC. Xử lý sự cố
If you encounter issues with your AIBOO LED lighting kit, refer to the following common troubleshooting steps:
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Đèn không bật. |
|
|
| Đèn nhấp nháy hoặc mờ đi đột ngột. |
|
|
| Điều khiển từ xa không phản hồi. |
|
|
8. Thông tin bảo hành
AIBOO products are typically covered by a manufacturer's warranty. For specific details regarding the warranty period and terms for your YK-300000197 lighting kit, please refer to the documentation included with your purchase or contact AIBOO customer support directly. Keep your purchase receipt as proof of purchase.
9. Hỗ trợ khách hàng
For further assistance, technical support, or inquiries regarding your AIBOO Linkable Under Cabinet LED Lighting Kit, please contact AIBOO customer service. Contact information can usually be found on the product packaging or the official AIBOO webđịa điểm.
The seller for this product is AIBOO Lighting. For support, you may visit their store page on Amazon or contact them through the Amazon platform.
