myTouchSmart 26892-T5

Hướng dẫn sử dụng bộ hẹn giờ kỹ thuật số cắm điện trong nhà myTouchSmart (Model 26892-T5)

Model: 26892-T5 | Brand: myTouchSmart

1. Giới thiệu

This manual provides detailed instructions for the setup, operation, and maintenance of your myTouchSmart Indoor Plug-in Simple Set Digital Timer, Model 26892-T5. Please read this manual thoroughly before using the device to ensure proper function and safety.

The myTouchSmart Digital Timer is designed to automate indoor lighting and electronics, allowing you to schedule their operation for convenience and energy efficiency.

2. Sản phẩm hếtview

myTouchSmart Indoor Plug-in Simple Set Digital Timer, front view hiển thị màn hình kỹ thuật số và các nút điều khiển

Hình 1: Đằng trước view of the myTouchSmart Indoor Plug-in Simple Set Digital Timer. The device is white, oval-shaped, with a digital display at the top showing "10:10 PM". Below the display are two arrow buttons (up and down). Further down are six rectangular buttons arranged in two columns: "my on time", "my off time", "evening 5pm-12am", "morning 5am-8am", "all night 6pm-6am", and "countdown". A polarized outlet is visible on the right side.

The myTouchSmart Digital Timer features a compact design with a clear digital display and intuitive control buttons. It includes a single polarized outlet for connecting your device.

Các thành phần chính:

3. Tính năng

4. Thiết lập

4.1 Khởi động ban đầu

  1. Unpack the timer from its packaging.
  2. Plug the timer into a standard 125V wall outlet. The display will illuminate.
  3. Allow the timer to charge its internal backup battery for approximately 15 minutes before programming. This ensures settings are retained during power interruptions.

4.2 Thiết lập thời gian hiện tại

  1. Nhấn và giữ CÁI ĐỒNG HỒ button (located above the display) until the time digits begin to flash.
  2. Sử dụng UP () Và XUỐNG () arrow buttons to adjust the hour. Pay attention to the AM/PM indicator.
  3. Nhấn nút CÁI ĐỒNG HỒ Nhấn nút một lần nữa để chuyển sang cài đặt phút.
  4. Sử dụng UP () Và XUỐNG (Các nút mũi tên để điều chỉnh phút.
  5. Nhấn nút CÁI ĐỒNG HỒ button one more time to save the current time and exit the setting mode.

5. Hướng dẫn vận hành

Connect the appliance or light you wish to control into the polarized outlet on the right side of the timer.

5.1 Setting Custom On/Off Times ("My On Time" / "My Off Time")

  1. Nhấn nút MY ON TIME button. The display will show "ON" and the time will flash.
  2. Sử dụng UP () Và XUỐNG () arrow buttons to set the desired turn-on hour, then press MY ON TIME again to set minutes.
  3. Once the desired ON time is set, press MY ON TIME to confirm. A blue LED indicator next to the button will light up, indicating the program is active.
  4. Repeat the process for the MY OFF TIME button to set the desired turn-off time. A blue LED indicator next to the button will light up.
  5. To deactivate a custom program, press the corresponding MY ON TIME or MY OFF TIME button until the blue LED indicator turns off.

5.2 Sử dụng chương trình cài đặt sẵn

The timer offers three convenient preset programs:

To activate a preset program, simply press the corresponding button (BUỔI TỐI, BUỔI SÁNG, hoặc ALL NIGHT). A blue LED indicator next to the button will light up, confirming the program is active. To deactivate, press the button again until the LED turns off.

5.3 Sử dụng bộ đếm ngược

  1. Nhấn nút ĐẾM NGƯỢC button. The display will show "CD" and the time will flash.
  2. Sử dụng UP () Và XUỐNG () arrow buttons to set the desired countdown duration (up to 24 hours, in 1-minute intervals).
  3. Nhấn ĐẾM NGƯỢC again to start the countdown. The blue LED indicator will light up.
  4. The connected device will turn ON (if currently OFF) or OFF (if currently ON) after the countdown duration expires.
  5. Để hủy đếm ngược, nhấn nút ĐẾM NGƯỢC button again until the blue LED indicator turns off.

Note: Only one program (custom or preset) can be active at a time. Activating a new program will deactivate any previously active program. The countdown timer operates independently but will override other programs for its duration.

6. Bảo trì

6.1 Vệ sinh

To clean the timer, unplug it from the wall outlet. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials, as these may damage the device.

6.2 Pin dự phòng

The timer includes an internal backup battery to retain settings during power outages. This battery is not user-replaceable and is designed to last the lifetime of the product. Ensure the timer is plugged in for at least 15 minutes initially to charge this battery.

KHAI THÁC. Xử lý sự cố

Vấn đềNguyên nhân có thểGiải pháp
Màn hình hiển thị hẹn giờ trống.Không có điện ở ổ cắm.Check the wall outlet with another device. Ensure the timer is fully plugged in.
Connected device does not turn On/Off.Program not active or incorrect settings.Verify the blue LED indicator for the desired program is lit. Recheck your custom or preset time settings. Ensure the connected device is switched ON.
Cài đặt bị mất sau khi tắt nguồntage.Backup battery not sufficiently charged.Ensure the timer is plugged in for at least 15 minutes to charge the backup battery. If issues persist, the battery may be depleted (not user-replaceable).
Timer is not responding to button presses.Lỗi phần mềm tạm thời.Unplug the timer from the wall outlet for 30 seconds, then plug it back in. This may reset the device.

8. Thông số kỹ thuật

9. Bảo hành và Hỗ trợ

9.1 Bảo hành có giới hạn

This myTouchSmart Digital Timer is backed by a bảo hành có giới hạn một năm. For details regarding warranty coverage and claims, please refer to the warranty card included with your product or visit the manufacturer's official webđịa điểm.

9.2 Hỗ trợ khách hàng

For technical assistance, troubleshooting not covered in this manual, or general inquiries, please contact myTouchSmart customer support. Contact information can typically be found on the product packaging or the official myTouchSmart webđịa điểm.

Please have your model number (26892-T5) and purchase date available when contacting support.

Tài liệu liên quan - 26892-T5

Trướcview Bộ hẹn giờ kỹ thuật số cắm điện trong nhà myTouchSmart Simple Set - Hướng dẫn sử dụng
Tìm hiểu cách thiết lập và lập trình Bộ hẹn giờ kỹ thuật số cắm điện trong nhà myTouchSmart Simple Set để điều khiển ánh sáng tự động. Bao gồm hướng dẫn về lịch trình tùy chỉnh, thời gian cài đặt trước và tính năng đếm ngược.
Trướcview Hướng dẫn sử dụng bộ hẹn giờ cắm điện myTouchSmart SunSmart
Hướng dẫn sử dụng bộ hẹn giờ cắm điện myTouchSmart SunSmart, mô tả chi tiết cách thiết lập, các tùy chọn lập trình và thông số kỹ thuật cho chức năng hẹn giờ kỹ thuật số trong nhà. Tìm hiểu cách tự động hóa hệ thống chiếu sáng và thiết bị gia dụng trong nhà của bạn.
Trướcview Hướng dẫn sử dụng bộ hẹn giờ cắm điện myTouchSmart Simple Set.
Instructions and specifications for the myTouchSmart Simple Set Plug-In Timer, an outdoor/indoor digital timer for automating lights and appliances. Learn how to mount, set the time, program on/off times, and understand safety warnings.
Trướcview myTouchSmart Simple Set Plug-In Timer: Hướng dẫn thiết lập và lập trình
Hướng dẫn ngắn gọn về cách thiết lập và lập trình Bộ hẹn giờ cắm điện myTouchSmart Simple Set để điều khiển tự động đèn và thiết bị gia dụng. Tìm hiểu cách cài đặt thời gian bật/tắt, hiểu rõ các tính năng và tuân thủ các hướng dẫn an toàn.
Trướcview myTouchSmart In-Wall Digital Timer 26893 User Manual & Installation Guide
Comprehensive user manual and installation guide for the myTouchSmart In-Wall Digital Timer (Model 26893). Learn how to safely install and use this programmable timer for indoor/outdoor lights and fans.
Trướcview Hướng dẫn thiết lập và tích hợp thiết bị thông minh Wi-Fi myTouchSmart
Hướng dẫn toàn diện về cách thiết lập ổ cắm và công tắc thông minh Wi-Fi myTouchSmart, bao gồm tích hợp ứng dụng, khả năng tương thích với trợ lý giọng nói Alexa và Google Assistant, và thông tin chi tiết sản phẩm.