ANSMANN M900P

Hướng dẫn sử dụng đèn pin LED ANSMANN M900P

Model: M900P (1600-0162)

Giới thiệu

The ANSMANN M900P is a professional 10W LED flashlight designed for versatility and ease of handling. Constructed from robust ABS plastic, it offers optimal ergonomics and comfort, even in cold conditions. Equipped with the latest CREE 10W LED technology and a highly efficient reflector system, this flashlight provides excellent light output and beam range, making it ideal for various outdoor activities and professional use.

Key features include its ultra-bright illumination, shock resistance, and IP67 waterproof rating, ensuring durability and reliability in challenging environments. It features four microcontroller-controlled lighting functions to suit different needs.

ANSMANN M900P LED Flashlight

Figure 1: ANSMANN M900P LED Flashlight. This image shows the main view of the black flashlight with its textured grip and wrist strap.

Thông tin an toàn

Cài đặt

Lắp đặt pin

The ANSMANN M900P flashlight requires four (4) AA Mignon batteries (included). Follow these steps to install them:

  1. Mở nắp đuôi đèn pin bằng cách xoay ngược chiều kim đồng hồ.
  2. Insert four AA batteries into the battery compartment, ensuring the correct polarity (+/-) as indicated inside the compartment.
  3. Vặn nắp đuôi đèn trở lại theo chiều kim đồng hồ cho đến khi chắc chắn. Không vặn quá chặt.
ANSMANN M900P Flashlight with tail cap

Figure 2: Flashlight with tail cap. This image shows the flashlight from an angle, highlighting the tail cap where batteries are inserted.

Hướng dẫn sử dụng

The M900P flashlight features a tactical end switch that controls four lighting functions. Press the switch to cycle through the modes.

Chế độ chiếu sáng:

To activate the flashlight, press the tactical end switch. Each subsequent press will cycle through the available lighting modes. To turn off the flashlight, continue pressing the switch until the light turns off, or hold the switch for a few seconds in any mode.

ANSMANN M900P Flashlight tactical end switch

Figure 3: Tactical End Switch. This image shows a close-up of the flashlight's end, featuring the power button and a warning symbol.

ANSMANN M900P Flashlight lighting modes and microchip

Figure 4: Lighting Modes and Microchip. This graphic illustrates the four tactical lighting functions (Strobe, Boost, 100%, 30%) and highlights the microchip control.

BẢO TRÌ

Xử lý sự cố

Vấn đềNguyên nhân có thểGiải pháp
Đèn pin không bật được.
  • Pin đã hết hoặc yếu.
  • Pin được lắp không đúng cách.
  • Nắp đuôi bị lỏng.
  • Thay pin AA mới.
  • Kiểm tra và sửa đúng cực của pin.
  • Vặn chặt nắp đuôi.
Ánh sáng yếu hoặc nhấp nháy.
  • Pin yếu.
  • Kết nối lỏng lẻo.
  • Thay pin.
  • Đảm bảo nắp đuôi được vặn chặt.

Thông số kỹ thuật

Tính năngChi tiết
Thương hiệuANSSMANN
Số hiệu mẫu1600-0162
Kích thước (D x R x C)17.4 x 4.04 x 4.04 cm (6.85 x 1.59 x 1.59 inch)
Cân nặng186 g (0.41 lbs)
Nguồn điện4 x Pin AA (bao gồm)
Loại nguồn sángLED (10W CREE)
Thông lượng sángLên đến 930 lumen
Khoảng cách chùm tiaLên đến 240 mét
Xếp hạng bảo vệ chống xâm nhập (IP)IP67 (Dust-tight, protected against immersion up to 1m)
Vật liệuNhựa ABS bền chắc
Chức năng100% Brightness, 30% Energy Saving, Ultra-Bright Boost, Strobe Light
Hoạt động Voltage6 vôn
ANSMANN M900P Flashlight dimensions and lumens

Figure 5: Dimensions and Lumens. This graphic displays the flashlight's length (174 mm) and width (40.5 mm), along with its 930 lumen output and high-efficiency reflector system.

Bảo hành và Hỗ trợ

ANSMANN products are manufactured with high quality standards. For information regarding warranty terms and conditions, please refer to the documentation included with your purchase or visit the official ANSMANN website. For technical support or service inquiries, please contact ANSMANN customer service.

Bạn có thể tìm thêm thông tin và chi tiết liên lạc trên ANSMANN official webđịa điểm.

Tài liệu liên quan - M900P

Trướcview Hướng dẫn sử dụng đèn pin LED ANSMANN M900P
Hướng dẫn vận hành toàn diện, hướng dẫn an toàn, thông tin môi trường và chi tiết bảo hành cho đèn pin LED ANSMANN M900P. Tìm hiểu về cách thay pin, sử dụng an toàn và thông số kỹ thuật sản phẩm.
Trướcview Hướng dẫn sử dụng đèn pin LED 3 trong 1 ANSMANN Future Multi
Sách hướng dẫn sử dụng đèn pin LED ANSMANN Future Multi 3in1, bao gồm hướng dẫn thay pin, cảnh báo an toàn, thông tin về môi trường, nguy cơ bức xạ quang học, giới hạn trách nhiệm và chi tiết bảo hành.
Trướcview Đèn pin LED ANSMANN FUTURE M250F - Hướng dẫn sử dụng & An toàn
Hướng dẫn vận hành toàn diện, hướng dẫn an toàn và thông số kỹ thuật cho đèn pin LED ANSMANN FUTURE M250F. Tìm hiểu về cách thay pin, xử lý môi trường và thông tin về các mối nguy hiểm.
Trướcview ANSMANN LC6000AC Portable LED Work Light User Manual
User manual and safety instructions for the ANSMANN LC6000AC portable LED work light. Features 6000 lumens, 180° beam angle, IP44 rating, and Schuko plug. Includes technical specifications, care instructions, and disposal information.
Trướcview Hướng dẫn sử dụng đèn pin LED ANSMANN ADVENTURE TA500BF
Sách hướng dẫn sử dụng toàn diện cho đèn pin LED ANSMANN ADVENTURE TA500BF, nêu chi tiết các biện pháp an toàn, mục đích sử dụng, tính năng sản phẩm, chế độ hoạt động, thông số kỹ thuật, bảo trì, xử lý chất thải môi trường, bảo hành và trách nhiệm pháp lý.
Trướcview Ansmann Keylight KL80R-USB User Manual and Safety Information
User manual and safety instructions for the Ansmann Keylight KL80R-USB, a dimmable mini LED flashlight with integrated USB-A plug. Includes product description, operating instructions, and safety warnings.