JBL CONTROL 52

JBL Professional Control 52 Surface-Mount Satellite Speaker

Model: CONTROL 52

Hướng dẫn sử dụng

Giới thiệu

The JBL Professional Control 52 is a stylish surface-mount satellite loudspeaker designed for subwoofer-satellite loudspeaker systems. It delivers superb high-fidelity sound through a low-distortion 60 mm (2.5 inch) driver. Key features include a secondary bucking magnet for high efficiency, a rubber half-roll surround for enhanced bass performance, a 19 mm (0.75 inch) copper-clad aluminum wire voice coil on a vented Nomex former for high fidelity and reliability, and a copper-capped pole piece for consistent impedance and extended high-frequency response. The included wall bracket allows for angling the speaker up to 45 degrees off-axis, providing flexible placement options.

Các tính năng chính

Có gì trong hộp

Thiết lập và cài đặt

The Control 52 satellite speakers are designed for surface mounting and come with all necessary brackets for installation. Ensure you have appropriate tools and follow local building codes for secure mounting.

JBL Control 52 Satellite Speaker, front view

Hình 1: Mặt trước view of the JBL Control 52 Satellite Speaker.

Lắp đặt loa

  1. Xác định vị trí lắp đặt: Choose a location on a wall or other suitable surface that provides optimal sound dispersion and is structurally sound. The speakers can be angled up to 45 degrees.
  2. Đính kèm dấu ngoặc: Use the included wall-mount brackets. Securely attach the brackets to the chosen surface using appropriate screws and anchors (not included, depending on wall material).
  3. Kết nối dây: Kết nối dây loa từ amplifier to the binding posts on the back of each Control 52 speaker. Ensure correct polarity (red to positive, black to negative).
  4. Gắn loa: Attach the Control 52 speakers to the installed brackets. The design allows for various orientations (vertical or horizontal) and angles.
Pair of JBL Control 52 Satellite Speakers with wall mounts

Figure 2: A pair of JBL Control 52 Satellite Speakers, showing the integrated wall mounts.

Kết nối dây điện

The Control 52 speakers are passive and require an external amplifier. Connect the speaker wires to the spring-loaded terminals on the rear of each speaker. Match the positive (+) terminal on the speaker to the positive (+) terminal on your amplifier, and the negative (-) terminal on the speaker to the negative (-) terminal on your ampchất lót.

Bên view of JBL Control 52 Satellite Speaker showing mounting bracket

Hình 3: Mặt bên view of the JBL Control 52 Satellite Speaker, highlighting the adjustable mounting bracket.

Video Guide: Speaker Wiring and Mounting

Video 1: This video demonstrates general speaker wiring and mounting techniques, which can be applied to the JBL Control 52 speakers. It shows how to connect speaker cables and secure speakers using brackets.

Hướng dẫn sử dụng

Sau khi được cài đặt đúng cách và kết nối với thiết bị tương thích amplifier, the JBL Control 52 speakers are ready for use. These speakers are designed to work as part of a subwoofer-satellite system, meaning they handle mid-range and high frequencies, while a separate subwoofer handles the bass.

Bật/Tắt nguồn

The Control 52 speakers are passive and do not have their own power switch. They are powered by the connected amplifier. Turn your amplifier on or off to control the speakers.

Kiểm soát âm lượng

Điều chỉnh âm lượng bằng cách sử dụng... amplifier or audio source. Avoid setting the volume too high, which can cause distortion and potentially damage the speakers.

Vị trí tối ưu

For the best audio experience, position the speakers to create a balanced sound field. Experiment with the angling feature of the wall brackets to direct sound towards the primary listening area. When used with a subwoofer, ensure the subwoofer is placed in a location that provides even bass distribution throughout the room.

BẢO TRÌ

Regular maintenance helps ensure the longevity and optimal performance of your JBL Control 52 speakers.

Xử lý sự cố

If you experience issues with your JBL Control 52 speakers, refer to the following common troubleshooting steps:

Vấn đềNguyên nhân có thểGiải pháp
Không có âm thanh từ loa
  • Amplifier is off or muted.
  • Incorrect speaker wiring.
  • Audio source not playing or improperly connected.
  • Đảm bảo amplifier is on and volume is up, not muted.
  • Check all speaker wire connections for correct polarity (+ to + and - to -).
  • Verify audio source is active and connected correctly to the ampchất lót.
Âm thanh bị méo hoặc không rõ ràng
  • Volume too high on ampbộ lót hoặc nguồn.
  • Dây loa bị hỏng.
  • Không đúng ampcài đặt bộ lọc.
  • Reduce volume on amplifier hoặc nguồn âm thanh.
  • Kiểm tra dây loa xem có bị hư hỏng không và thay thế nếu cần.
  • Kiểm tra amplifier settings (e.g., tone controls, crossover settings) to ensure they are appropriate for satellite speakers.
Một loa không hoạt động
  • Loose or incorrect wiring for that speaker.
  • Loa bị lỗi.
  • Check wiring connections for the non-working speaker.
  • Swap the non-working speaker with a working one to determine if the speaker itself is faulty.

Thông số kỹ thuật

Tên mẫuĐIỀU KHIỂN 52
Thương hiệuJBL
Loại loaSatellite Speaker (for Subwoofer-Satellite Loudspeaker System)
Kiểu lắp đặtLắp đặt bề mặt
Người nói Amploại lificationThụ động
Trở kháng16 Ohm
Đáp ứng tần số140 Hz – 20 kHz
Công suất đầu ra tối đa của loa600 Watts (Cao điểm)
Đường kính loa trầm60 mm (2.5 inch)
Đường kính loa tweeter19 mm (0.75 inch)
Kích thước sản phẩm2"D x 5"W x 3"H (approximate, per speaker)
Trọng lượng sản phẩm3.7 bảng Anh (mỗi loa)
Màu sắcĐen
Vật liệuNhôm
Sử dụng trong nhà/ngoài trờiTrong nhà
Công nghệ kết nốiCó dây
Sử dụng được đề xuấtĐối với hệ thống âm thanh vòm
Mã số UPC050036905190

Bảo hành và Hỗ trợ

The JBL Professional Control 52 Surface-Mount Satellite Speaker comes with a Limited Warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included in your product packaging or visit the official JBL webđịa điểm.

For technical support, service, or additional product information, please contact JBL customer service or visit the Cửa hàng JBL trên Amazon.

Tài liệu liên quan - ĐIỀU KHIỂN 52

Trướcview Hệ thống rạp chiếu phim JBL 5000 Series: Hướng dẫn sử dụng và thông số kỹ thuật
Hướng dẫn sử dụng toàn diện cho Hệ thống rạp chiếu phim JBL dòng 5000, cung cấp chi tiết về cấu hình hệ thống, điều khiển kỹ thuật số, kết nối, yêu cầu về nguồn điện, vị trí đặt loa và thông số kỹ thuật cho các mẫu 5671, 5672 và 5674.
Trướcview Loa âm trần JBL Control 416C/T Standard Coverage Series - Thông số kỹ thuật
Thông số kỹ thuật chi tiết, tính năng và dữ liệu hiệu suất của JBL Control 416C/T, loa trần đồng trục hai chiều 6.5 inch được thiết kế cho các hệ thống âm thanh thương mại và chuyên nghiệp.
Trướcview Sách hướng dẫn sử dụng JBL 4367: Loa đứng 2 chiều 15 inch
Sách hướng dẫn sử dụng này cung cấp thông tin chi tiết về loa JBL 4367, loa đứng 2 chiều 15 inch. Tìm hiểu về cách thiết lập, bố trí, kết nối, điều khiển và bảo quản để có hiệu suất âm thanh tối ưu.
Trướcview Chân loa JBL JS-120 - Tính năng, Thông số kỹ thuật và Lắp ráp
Thông tin chi tiết về chân đế loa JBL JS-120, bao gồm các tính năng, thông số kỹ thuật, mẫu loa tương thích và hướng dẫn lắp ráp. Được thiết kế để nâng cao hiệu suất và độ ổn định âm thanh.
Trướcview Hướng dẫn sử dụng hệ thống rạp chiếu phim JBL dòng 5000 dành cho loa kênh màn hình chuyên nghiệp
Hướng dẫn sử dụng toàn diện cho Hệ thống rạp chiếu phim JBL 5000 Series (model 5671, 5672, 5674). Bao gồm hướng dẫn lắp đặt, cấu hình, điều khiển kỹ thuật số, kết nối, nguồn điện, vị trí đặt loa và thông số kỹ thuật chi tiết cho âm thanh rạp chiếu phim chuyên nghiệp.
Trướcview JBL STX812M Technical Manual and Specifications
Detailed technical manual and specifications for the JBL STX812M professional loudspeaker, including acoustic, electrical, and physical characteristics, wiring diagrams, and component part lists.