MoKo Vertical Flip Stand Case for 6-inch Kindle

Giới thiệu

This instruction manual provides guidance for the MoKo Vertical Flip Stand Case, designed to protect and enhance the functionality of your 6-inch Amazon Kindle E-reader. This case is compatible with the following models:

• Amazon 6-inch All New Kindle 11th Generation (2022/2023)
• Amazon 6-inch Kindle 10th Generation (2019 Release)
• Amazon 6-inch Kindle 8th Generation (2016 Release)

Quan trọng: Please confirm the model number on the back of your E-reader device is Cav2l3, J9G29R, hoặc SY69JL before using this case. This case is KHÔNG compatible with Kindle Paperwhite 10th Generation 2018 Release or other Amazon Kindle/Fire Tablet models.

Cài đặt

Follow these steps to properly install your Kindle E-reader into the MoKo case:

1. Gently align your 6-inch Kindle E-reader with the case's internal frame.
2. Press the Kindle firmly into the frame until it is securely seated. Ensure all corners are properly fitted.
3. Verify that all ports, buttons, and controls are accessible through the case's precise cutouts.

Hướng dẫn sử dụng

Chức năng tự động bật/tắt màn hình

The case features an automatic wake/sleep function. Simply open the front cover to wake your Kindle E-reader, and close it to put your device to sleep. This magnetic closure helps conserve battery life.

Vertical Flip Stand

The case is designed with a vertical flip stand feature, allowing for hands-free viewing at multiple angles. The front cover can be folded back and secured into one of the three anti-slip strips to create a stable stand. This design aims to reduce strain during extended reading sessions.

Access to Controls and Charging

The case provides precise cutouts for full access to all Kindle controls and features, including the power button and charging port, ensuring hassle-free operation without needing to remove the device from the case.

Đóng từ tính

In addition to the auto wake/sleep function, the case features a magnetic closure to keep the front cover securely closed when not in use, providing an additional layer of protection for your Kindle E-reader.

Sản phẩm trênview Băng hình

BẢO TRÌ

To ensure the longevity and appearance of your MoKo case, follow these maintenance guidelines:

• Vệ sinh: Wipe the exterior PU leather with a soft, damp vải. Tránh sử dụng hóa chất mạnh hoặc chất tẩy rửa có tính mài mòn.
• Chăm sóc nội thất: The microfiber lining is designed to protect your screen. If it becomes dusty, gently wipe it with a dry, lint-free cloth.
• Tránh những điều kiện khắc nghiệt: Không nên để vỏ máy tiếp xúc với nhiệt độ quá cao, ánh nắng trực tiếp trong thời gian dài hoặc độ ẩm quá mức.
• Kho: When not in use, store the case in a clean, dry environment.

Xử lý sự cố

If you encounter any issues with your MoKo case, consider the following:

• Kindle does not fit: Double-check the compatibility section and your Kindle's model number. Ensure you are not attempting to install an incompatible device.
• Chức năng tự động bật/tắt màn hình không hoạt động: Ensure your Kindle E-reader is properly seated within the case and that the magnetic front cover is fully closed. Magnets must align correctly for the function to activate.
• Chân đế không ổn định: Make sure the Kindle is securely placed in one of the anti-slip grooves on the front cover. Adjust the angle to find a stable position on a flat surface.
• Khó truy cập các cổng/nút: Confirm the Kindle is correctly aligned within the case's frame. The precise cutouts should allow unobstructed access.

Thông số kỹ thuật

Bảo hành và Hỗ trợ

For information regarding product warranty, returns, or technical support, please refer to the retailer's policy where the product was purchased or contact MoKo customer service directly. You can often find support information on the official MoKo brand store page:

Visit the MoKo Store on Amazon