1. Giới thiệu
This manual provides essential instructions for the safe installation, operation, and maintenance of your BFT ICARO Slide Gate Opener. The ICARO series is designed for intensive use, offering robust performance and reliability for sliding gates. Please read this manual thoroughly before proceeding with any installation or operation to ensure proper function and to prevent damage or injury.
The BFT ICARO Slide Gate Opener features a monoblock gear motor structure, ensuring maximum resistance and performance in various environmental conditions. It includes proximity limit switches for accurate gate positioning and a control unit with a programming display and D-Track torque, speed, and position management system. An incorporated dual-channel radio receiver simplifies remote control integration.
Figure 1: BFT ICARO Slide Gate Opener main unit. This image shows the compact design and robust casing of the gate opener.
2. Thông tin an toàn
CẢNH BÁO: Failure to follow these safety instructions could result in serious injury or death, and/or damage to the product or property.
- Việc lắp đặt và sửa chữa chỉ được thực hiện bởi nhân viên có chuyên môn.
- Ensure the power supply is disconnected before performing any maintenance or repair work.
- Keep hands, feet, and clothing clear of the gate and opener while the system is in operation.
- Do not allow children to play with or operate the gate opener controls.
- Thường xuyên kiểm tra cổng và bộ phận mở cổng xem có dấu hiệu hao mòn, hư hỏng hoặc lệch trục hay không.
- Install safety devices such as photocells and safety edges to prevent entrapment.
- Ensure the gate moves freely and is properly balanced before installing the opener.
3. Thiết lập và Cài đặt
This section outlines the general steps for installing the BFT ICARO Slide Gate Opener. For detailed diagrams and specific wiring instructions, refer to the separate installation guide provided with your product.
3.1 Chuẩn bị mặt bằng
- Ensure the gate track is clean and free of obstructions.
- Verify the gate slides smoothly by hand and is properly aligned.
- Prepare a stable concrete base for mounting the opener unit, ensuring it is level and positioned correctly relative to the gate.
3.2 Lắp đặt bộ mở
- Securely fasten the opener unit to the prepared concrete base using appropriate anchor bolts.
- Ensure the pinion gear is correctly aligned with the gate's rack, maintaining a small clearance (approx. 1-2 mm) to allow for thermal expansion.
3.3 Kết nối điện
- Connect the main power supply (230 V, 60 Hz single-phase) to the control unit, ensuring all connections comply with local electrical codes.
- Wire all safety devices (photocells, safety edges) to the control unit as per the wiring diagram.
- Connect any accessories such as remote receivers or keypads.
3.4 Lập trình ban đầu
- Power on the unit. The integrated LEO B CBB control panel will display programming options.
- Follow the on-screen instructions to perform an auto-setup cycle, which will detect the gate's travel limits and adjust motor parameters.
- Test all safety devices to ensure they function correctly before operating the gate automatically.
4. Hướng dẫn vận hành
The BFT ICARO Slide Gate Opener can be operated using various methods, including remote controls, keypads, or other access control systems connected to the integrated dual-channel radio receiver.
4.1 Vận hành tự động
- Press the designated button on your remote control or keypad to initiate gate movement.
- The gate will open or close to its programmed limit. A second press during movement will typically stop the gate. A third press will reverse its direction.
- The D-Track system continuously monitors torque, speed, and position, ensuring smooth and safe operation.
4.2 Phát hành thủ công
Trong trường hợp mất điện hoặc trục trặc, cổng có thể được vận hành bằng tay.
- Locate the manual release knob on the opener unit.
- Insert the provided key (if applicable) and turn the knob to disengage the motor.
- Giờ đây, cánh cổng có thể được đẩy mở hoặc đóng bằng tay.
- To re-engage the motor, turn the knob back to its original position and remove the key.
5. Bảo trì
Regular maintenance ensures the longevity and reliable operation of your BFT ICARO Slide Gate Opener. Perform these checks periodically.
5.1 Kiểm tra hàng tháng
- Sự chuyển động của cổng: Manually slide the gate to ensure it moves freely without excessive friction or binding.
- Thiết bị an toàn: Test photocells and other safety sensors by obstructing their path during gate operation. The gate should stop or reverse.
- Phần cứng lắp đặt: Inspect all mounting bolts and fasteners for tightness.
5.2 Bi-Annual Checks (Recommended by Qualified Technician)
- Bôi trơn: Lubricate the gate wheels, bearings, and any moving parts of the gate itself. The opener's internal gears are typically self-lubricating.
- Kết nối điện: Inspect all wiring for signs of wear, corrosion, or loose connections.
- Công tắc giới hạn: Verify the proper functioning and adjustment of the electromechanical limit switches.
- D-Track System: A technician can verify the optimal performance of the D-Track torque management system.
Ghi chú: Always disconnect power before performing any maintenance that requires opening the opener's casing.
KHAI THÁC. Xử lý sự cố
Phần này cung cấp giải pháp cho các sự cố thường gặp. Đối với các vấn đề phức tạp hơn, vui lòng liên hệ với kỹ thuật viên có chuyên môn.
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Cổng không di chuyển. | No power; Safety device activated; Manual release engaged; Remote battery dead. | Check power supply and circuit breaker; Inspect safety sensors for obstructions; Disengage manual release; Replace remote battery. |
| Cổng dừng đột ngột. | Obstruction detected by safety device; Motor overload; Limit switch issue. | Clear obstructions; Check gate for free movement; Consult technician for motor or limit switch issues. |
| Điều khiển từ xa không hoạt động. | Dead battery; Out of range; Remote not programmed. | Replace battery; Move closer to the receiver; Refer to programming instructions for your remote. |
| Cổng mở/đóng một phần. | Limit switches misaligned; Obstruction. | Check for obstructions; Re-adjust limit switches (refer to setup section or technician). |
7. Thông số kỹ thuật
| Tính năng | Chi tiết |
|---|---|
| Số hiệu mẫu | BFT-ICARO-SLIDE-GATE-OPENER-EM |
| Bảng điều khiển | LEO B CBB (incorporated) |
| Loại nhà điều hành | Không thể đảo ngược |
| Nguồn điện | 230 V, 60 Hz single-phase |
| Điện hấp thụ | 1 mã lực (750 W) |
| Bảo vệ nhiệt | Tích hợp |
| Pinion Pitch | 4 mm (25 răng) |
| Leaf Speed | 7.9 inch một giây |
| Output Rotational Speed | 37 vòng/phút |
| Impact Reaction | Electronic clutch with encoder (D-Track) |
| Công tắc giới hạn | Cơ điện |
| Phát hành thủ công | Mechanical release with knob |
| Chu kỳ kinh doanh | Sử dụng chuyên sâu |
| Điều kiện môi trường | 5°F đến 140°F (-15°C đến 60°C) |
| Mức độ bảo vệ | IP24 |
| Trọng lượng của người vận hành | 56 pound (25.4 kg) |
| Tần suất sử dụng | Very intensive |
8. Bảo hành và Hỗ trợ
8.1 Thông tin bảo hành
For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official BFT webThông thường, chế độ bảo hành bao gồm các lỗi về vật liệu và tay nghề trong điều kiện sử dụng bình thường trong một khoảng thời gian nhất định kể từ ngày mua.
Giữ lại bằng chứng mua hàng để yêu cầu bảo hành.
8.2 Hỗ trợ kỹ thuật
If you encounter issues that cannot be resolved using the troubleshooting guide, or require professional assistance, please contact your authorized BFT dealer or the manufacturer's technical support department.
Nhà sản xuất: BFT
Please have your model number (BFT-ICARO-SLIDE-GATE-OPENER-EM) and purchase date ready when contacting support.