1. Giới thiệu
The IK Multimedia iRig Mic Lav Dual Pack provides two compact, professional-grade lavalier microphones designed for use with smartphones and tablets. These omnidirectional condenser microphones are ideal for recording interviews, podcasts, presentations, and other audio content directly to your mobile device. The dual pack allows for simultaneous recording of two subjects, enhancing versatility for various applications.
Image 1.1: The iRig Mic Lav Dual Pack includes two compact lavalier microphones.
2. Nội dung gói hàng
Verify that all items are present in your iRig Mic Lav Dual Pack:
- 2 x iRig Mic Lav lavalier microphones
- 2 x Foam windscreens
- 1 x Travel case
Image 2.1: Retail packaging for the iRig Mic Lav 2 Pack.
3. Tính năng
- Professional mobile lavalier microphone for all compatible devices.
- High-quality omnidirectional condenser capsule for clear audio capture.
- Includes foam pop shield to reduce plosives and wind noise.
- Durable mounting clip for secure attachment to clothing.
- 1/8" TRRS connector for direct connection to smartphones and tablets.
- Combo 1/8" TRRS port for headphone monitoring or line out to a powered speaker.
- Daisy-chain capability: Connect up to two iRig Mic Lavs to the same device.
- Compatible with any audio app that accepts headset input.
- 150cm (66") cable length for flexible placement.
Image 3.1: Detail of the iRig Mic Lav's omnidirectional condenser microphone and clip.
4. Thiết lập
4.1 Kết nối Micrô
- Locate the 1/8" TRRS connector on the iRig Mic Lav cable.
- Plug this connector into the headphone/microphone jack of your smartphone or tablet.
- If your device lacks a 1/8" TRRS jack (e.g., newer iPhones or Android devices), you will need a compatible Lightning to 1/8" adapter or USB-C to 1/8" adapter (not included).
4.2 Gắn micro
- Attach the foam windscreen to the microphone capsule to reduce unwanted noise.
- Use the integrated clip to securely fasten the microphone to clothing, typically near the speaker's chest area, approximately 6-8 inches (15-20 cm) from the mouth.
- Ensure the microphone is positioned to capture the speaker's voice clearly without rubbing against clothing.
Image 4.1: Connection diagram for the iRig Mic Lav, including daisy-chaining and headphone monitoring.
5. Hướng dẫn vận hành
5.1 Ghi âm cơ bản
- Connect the iRig Mic Lav to your mobile device as described in Section 4.1.
- Open your preferred audio or video recording application.
- Ensure the application recognizes the external microphone input. This is usually automatic, but some apps may require manual selection in their settings.
- Begin recording. Monitor audio levels within your application to prevent clipping or distortion.
5.2 Daisy-Chaining Two Microphones
The iRig Mic Lav features a unique daisy-chaining capability, allowing you to connect a second iRig Mic Lav to the first for two-person interviews or dual audio capture.
- Connect the first iRig Mic Lav to your mobile device.
- Plug the 1/8" TRRS connector of the second iRig Mic Lav into the combo 1/8" TRRS port located on the first iRig Mic Lav's breakout box.
- Both microphones will now feed audio into your mobile device as a single stereo or mono input, depending on the recording application's capabilities.
Image 5.1: Two iRig Mic Lav microphones daisy-chained for dual recording with a smartphone.
5.3 Headphone Monitoring and Line Out
The combo 1/8" TRRS port on the iRig Mic Lav can also be used for real-time audio monitoring or to send the audio signal to a powered speaker.
- Giám sát tai nghe: Plug your headphones into the combo 1/8" TRRS port. For real-time monitoring of the microphone input, your recording application phải support and have pass-through monitoring enabled. The iRig Mic Lav itself does not provide hardware-based zero-latency monitoring.
- Dòng ra: Connect a cable from this port to the input of a powered speaker or mixer to ampLàm sống động âm thanh của bạn.
Image 5.2: The iRig Mic Lav is suitable for mobile streaming and recording in various environments.
6. Khả năng tương thích
The iRig Mic Lav is compatible with a wide range of mobile devices:
- Thiết bị iOS: iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPhone 4, iPhone 3GS, iPod touch (6th, 5th, 4th and 3rd generation), iPad Pro (12.9-inch), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad 4th generation, iPad mini, iPad 3rd generation, iPad 2, iPad.
- Thiết bị Android: Compatible with most Android devices that support the CTIA/AHJ wiring standard for the 1/8" TRRS jack. Performance may vary between devices and Android versions.
- Bộ điều hợp: Additional devices may require Lightning to 1/8" earbud adapters or USB-C to 1/8" earbud adapters (not included).
7. Bảo trì
- Vệ sinh: Gently wipe the microphone body and cable with a soft, dry cloth. Do not use liquid cleaners or solvents.
- Kính chắn gió bằng bọt: The foam windscreen can be carefully removed and cleaned with mild soap and water if necessary. Ensure it is completely dry before reattaching.
- Kho: Store the iRig Mic Lav in its included travel case when not in use to protect it from dust, moisture, and physical damage.
- Chăm sóc cáp: Tránh uốn cong quá gấp hoặc kéo căng cáp quá mức để tránh hư hỏng bên trong.
Image 7.1: The iRig Mic Lav includes a protective case for safe storage and transport.
KHAI THÁC. Xử lý sự cố
- Không có âm thanh hoặc âm lượng thấp:
- Ensure the microphone is fully plugged into the device's TRRS jack or adapter.
- Check your device's volume settings and the recording application's input level.
- Verify that your recording application is configured to use the external microphone input.
- If using an adapter (Lightning/USB-C), ensure it is compatible and functioning correctly.
- Poor Audio Quality (Static, Hiss, Distortion):
- Ensure the foam windscreen is properly attached to reduce plosives and ambient noise.
- Check the microphone's placement; it should not rub against clothing.
- Avoid recording in excessively noisy environments.
- Monitor input levels in your recording app to prevent clipping (distortion).
- Monitoring Issues (No Sound in Headphones):
- The iRig Mic Lav requires your recording application to have pass-through monitoring enabled for real-time audio feedback through headphones. This is not a hardware feature of the microphone itself.
- Ensure headphones are fully plugged into the combo TRRS port.
- Daisy-Chaining Not Working:
- Ensure both iRig Mic Lav units are correctly connected, with the second mic plugged into the first mic's breakout box.
- Verify that your recording application supports multiple microphone inputs or a combined stereo/mono input from the daisy-chain setup.
9. Thông số kỹ thuật
10. Thông tin bảo hành
IK Multimedia products are covered by a limited warranty against defects in materials and workmanship. The specific duration and terms of the warranty may vary by region. Please retain your proof of purchase for warranty claims. For detailed warranty information, refer to the official IK Multimedia webtrang web hoặc liên hệ với bộ phận hỗ trợ khách hàng.
11. Hỗ trợ
For further assistance, technical support, or to access additional resources, please visit the official IK Multimedia support page or their Amazon brand store:
- IK Multimedia Amazon Store: Ghé thăm cửa hàng
- Hướng dẫn sử dụng chính thức (PDF): Tải xuống PDF
Tài liệu liên quan - iRig Mic Lav Dual Pack
| Tính năng | Đặc điểm kỹ thuật |
|---|---|
| Loại micrô | Tụ điện |
| Mẫu cực | Đa hướng |
| Đáp ứng tần số | 30 Hz - 16 kHz |
| Signal-to-Noise Ratio | 60 dB |
| Kết nối | 1/8" TRRS Jack (CTIA/AHJ standard) |
| Chiều dài cáp | 150 cm (66 inch) |
| Vật liệu | Aluminum (microphone body) |
| Trọng lượng sản phẩm | 3.52 Ounces (per microphone) |
| Kích thước sản phẩm | 5.3 x 1.6 x 5.6 inch (bao bì) |
| Số hiệu mẫu | IP-IRIG-MICLAVDUAL-IN |
 |
Hướng dẫn sử dụng IK Multimedia iRig Pre: Giao diện micro đa năng dành cho điện thoại thông minh và máy tính bảng Hướng dẫn sử dụng toàn diện cho IK Multimedia iRig Pre, một giao diện micro đa năng dành cho điện thoại thông minh và máy tính bảng. Tìm hiểu về cài đặt, thiết lập, mẹo sử dụng, thông số kỹ thuật và hỗ trợ. |
 |
Hướng dẫn sử dụng micro kỹ thuật số IK Multimedia iRig Mic HD 2 Comprehensive guide to the IK Multimedia iRig Mic HD 2 digital microphone, covering installation, setup, usage, and troubleshooting for iOS and Mac devices. Learn about its features, pickup patterns, and optimal gain settings. |
 |
iRig Mic Studio Quick Start Guide - IK Multimedia Quick start guide for the IK Multimedia iRig Mic Studio, covering setup, connections, operation, and mounting for mobile devices and computers. Includes FCC statement and warranty information. |
 |
iRig Pro Quattro I/O User Manual - Portable Audio/MIDI Interface Comprehensive user manual for the IK Multimedia iRig Pro Quattro I/O, a 4-in/2-out portable audio/MIDI interface for iOS, Android, Mac/PC with standalone functionality. Learn about installation, setup, features, and specifications. |
 |
Hướng dẫn sử dụng IK Multimedia iRig Keys 2: Bộ điều khiển bàn phím MIDI siêu nhỏ gọn Khám phá IK Multimedia iRig Keys 2, bộ điều khiển bàn phím MIDI siêu nhỏ gọn. Sách hướng dẫn sử dụng này cung cấp hướng dẫn thiết lập, sử dụng và chỉnh sửa toàn diện cho các thiết bị iOS, Mac và Windows. |
 |
Hướng dẫn sử dụng nhanh giao diện âm thanh/MIDI iRig PRO Universal cho iPhone, iPad, Mac Hãy bắt đầu nhanh chóng với iRig PRO, giao diện âm thanh và MIDI đa năng chất lượng cao dành cho iPhone, iPod touch, iPad và Mac. Hướng dẫn này bao gồm thiết lập, tính năng và cách khắc phục sự cố để ghi âm thanh di động liền mạch. |