Giới thiệu
The Ergotron Vertical CPU Holder provides a secure and space-saving solution for mounting your computer's central processing unit (CPU) or power supply. Designed to integrate with VESA monitor arms or directly onto sturdy vertical surfaces, this holder helps maintain an organized workspace by keeping your PC off the desk and out of the way. Its robust steel construction ensures durability and secure retention for a wide range of CPU sizes.
Nội dung gói
Trước khi bắt đầu cài đặt, hãy đảm bảo tất cả các thành phần đều có sẵn:
- Vertical CPU Holder assembly
- Bộ phụ kiện lắp đặt (ốc vít, vòng đệm, cờ lê lục giác)
- Protective pads (adhesive)
Image: Ergotron Vertical CPU Holder and its components, including the main white holder, mounting screws, an Allen wrench, and protective adhesive pads.
Thiết lập và cài đặt
This CPU holder can be installed directly onto a sturdy vertical surface or an Ergotron Wall Track. Choose the appropriate method for your setup.
1. Prepare the CPU Holder
- Apply the provided protective pads to the inner surfaces of the CPU holder where your computer will rest. This prevents scratches and provides a snug fit.
- Adjust the width of the holder to match your CPU. The holder accommodates PCs from 2 to 8 inches (5 to 20 cm) wide. Use the included fasteners to lock the desired width.
2. Tùy chọn lắp đặt
Option A: Direct Wall/Surface Mount
- Select a sturdy vertical surface capable of supporting the weight of the CPU holder and your computer (up to 40 lbs / 18 kg).
- Position the CPU holder against the surface at the desired height. Mark the locations for the mounting screws.
- Drill pilot holes if necessary, according to the type of surface and mounting hardware.
- Secure the CPU holder to the surface using the provided screws and an appropriate screwdriver or drill. Ensure it is firmly attached and does not wobble.
Option B: Ergotron Wall Track Mount
- Ensure you have an Ergotron Wall Track securely installed.
- Align the mounting holes on the CPU holder with the attachment points on the Ergotron Wall Track.
- Use the appropriate hardware (often included with the wall track or CPU holder) to attach the holder to the track. Tighten all fasteners to ensure stability.
Hướng dẫn sử dụng
Once the CPU holder is securely installed and its width adjusted:
- Carefully slide your CPU or power supply into the holder.
- Ensure the CPU is seated firmly and evenly within the holder.
- If necessary, re-adjust the width fasteners to achieve a snug fit, preventing movement without applying excessive pressure.
The holder is designed for vertical orientation of your CPU, optimizing space and airflow.
BẢO TRÌ
Regular maintenance ensures the longevity and safe operation of your Ergotron CPU Holder.
- Vệ sinh: Lau sạch giá đỡ bằng khăn mềm.amp vải. Tránh sử dụng chất tẩy rửa hoặc dung môi có tính mài mòn vì có thể làm hỏng lớp hoàn thiện.
- Kiểm tra ốc vít: Periodically check all mounting screws and width adjustment fasteners to ensure they remain tight. Re-tighten if any looseness is detected.
- Pad Inspection: Inspect the protective pads for wear or damage. Replace if necessary to maintain proper cushioning and grip for your CPU.
Xử lý sự cố
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| CPU holder feels loose after installation. | Mounting screws are not fully tightened or surface is not sturdy. | Ensure all mounting screws are securely tightened. Verify the mounting surface is appropriate and can support the weight. |
| CPU does not fit or is too loose in the holder. | Width adjustment is incorrect or CPU dimensions are outside the specified range. | Re-adjust the width fasteners to match your CPU's dimensions. Confirm your CPU's width is between 2 and 8 inches (5 to 20 cm). |
| Scratches on CPU casing. | Protective pads are missing or worn. | Ensure all protective pads are correctly applied and in good condition. Replace if necessary. |
Thông số kỹ thuật
| Tính năng | Chi tiết |
|---|---|
| Số hiệu mẫu | 97-468-216 |
| Kích thước sản phẩm | 11.26 x 10.35 x 7.4 inch (28.6 x 26.3 x 18.8 cm) |
| Trọng lượng sản phẩm | 1.98 pound (0.9 kg) |
| CPU Width Capacity | 2 đến 8 inch (5 đến 20 cm) |
| Sức chứa trọng lượng | Lên đến 40 lbs (18 kg) |
| Vật liệu | Thép xây dựng |
| Màu sắc | Trắng |
Video sản phẩm chính thức
Hiện tại, người bán chưa cung cấp video sản phẩm chính thức nào cho mẫu sản phẩm cụ thể này.
Thông tin bảo hành
For detailed warranty information regarding your Ergotron Vertical CPU Holder, please refer to the official Ergotron website or contact Ergotron customer support directly. Warranty terms and conditions may vary by region and product.
Hỗ trợ khách hàng
If you require assistance with installation, troubleshooting, or have any questions about your Ergotron Vertical CPU Holder, please contact Ergotron customer support. Visit the official Ergotron webtrang web để biết thông tin liên hệ và nguồn hỗ trợ.
Bạn cũng có thể ghé thăm Ergotron Store on Amazon để biết thêm thông tin sản phẩm.
