1. Sản phẩm hếtview
The Sharp Digital Auto Time Set Wall Clock, Model B012Y14XQ4, is designed for clear and easy readability. This clock automatically sets itself to the correct time and date using the Accu-Set feature. It displays the current time, month, date, day of the week, and indoor temperature on a split screen.
The clock operates on 2 AA batteries (not included) and measures approximately 8 x 7 inches. Its sleek black design allows it to blend seamlessly into various indoor environments, such as bedrooms or offices.
Hình 1: Mặt trước view of the Sharp Digital Auto Time Set Wall Clock.
2. Thiết lập
- Tháo hộp: Cẩn thận lấy đồng hồ ra khỏi bao bì. Kiểm tra xem có hư hỏng gì không.
- Lắp đặt pin: Locate the battery compartment on the back of the clock. Insert 2 new AA batteries, ensuring correct polarity (+/-). Batteries are not included.
- Initial Time Setting (Accu-Set): The clock is equipped with Sharp Accu-Set technology, designed to automatically set the correct time and date upon battery installation. Allow a few minutes for the clock to synchronize. If the time does not set automatically, ensure the clock is placed in an area with good signal reception.
- Lắp đặt: This clock can be wall-mounted or placed on a flat surface. For wall mounting, use the integrated hanging slot on the back of the unit.
Hình 2: Phía sau view with dimensions and battery compartment location.
3. Hướng dẫn vận hành
Once set up, the Sharp Digital Auto Time Set Wall Clock continuously displays essential information:
- Thời gian: The current time is shown in large, clear digits. An 'PM' indicator is present for afternoon hours.
- Ngày: The month and date are displayed.
- Ngày trong tuần: The current day of the week is indicated.
- Nhiệt độ trong nhà: The ambient indoor temperature is shown in Fahrenheit.
The Accu-Set feature ensures the clock maintains accurate time, including adjustments for Daylight Saving Time (DST) where applicable. No manual adjustments are typically required for time changes.
Video 1: Demonstration of the Sharp Accu-Set Digital Wall Clock features, including time, date, and temperature display.
4. Bảo trì
- Thay thế pin: When the display dims or the clock stops functioning, replace both AA batteries with new ones. Always replace both batteries at the same time.
- Vệ sinh: To clean the clock, wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or display.
- Kho: Nếu cất giữ đồng hồ trong thời gian dài, hãy tháo pin ra để tránh rò rỉ.
KHAI THÁC. Xử lý sự cố
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Clock does not display time or is inaccurate. | Dead or incorrectly installed batteries. Accu-Set signal interference. | Replace batteries with new AA batteries, ensuring correct polarity. Move the clock to a different location, away from electronic devices that may cause interference, and allow time for re-synchronization. |
| Màn hình tối hoặc khó đọc. | Low batteries. Insufficient ambient light. | Replace batteries. This clock does not feature a backlight; ensure it is placed in a well-lit area for optimal visibility. |
| Thời gian hiển thị không chính xác sau khi thiết lập ban đầu. | Accu-Set feature did not synchronize correctly. | Remove batteries, wait 1 minute, then reinsert. Place the clock near a window or in an open area to improve signal reception for automatic time setting. |
6. Thông số kỹ thuật
- Thương hiệu: Sắc
- Người mẫu: B012Y14XQ4
- Kiểu hiển thị: Điện tử
- Màu sắc: Đen
- Kích thước sản phẩm: Rộng 9" x Cao 8"
- Nguồn điện: Chạy bằng pin (cần 2 pin AA, không bao gồm)
- Tính năng đặc biệt: Temperature and Calendar Display, Accu-Set Automatic Time Setting
- Kiểu lắp đặt: Treo tường
- Vật liệu: Nhựa
- Sử dụng trong nhà/ngoài trời: Trong nhà
- Trọng lượng sản phẩm: 1.04 pound
