Brady 133290

Khóa móc Brady 133290, chìa khóa chung, bằng nhôm (Bộ 6 chiếc) - Hướng dẫn sử dụng

Mẫu: 133290

Giới thiệu

This manual provides essential instructions for the proper setup, operation, and maintenance of your Brady 133290 Keyed Padlock set. These aluminum padlocks are designed for security applications, featuring a lightweight yet durable construction and a "keyed alike" system for convenience. Please read this manual thoroughly before using the product.

Tính năng sản phẩm

Nội dung gói

Sau khi mở kiện hàng, vui lòng kiểm tra xem tất cả các mặt hàng được liệt kê bên dưới có đầy đủ và không bị hư hỏng hay không:

Six green Brady aluminum padlocks with twelve matching keys.

Image 1: Contents of the Brady 133290 padlock package, showing six green aluminum padlocks and twelve identical keys. All keys are designed to operate all padlocks in the set.

Cài đặt

  1. Inspect Padlocks: Before initial use, visually inspect each padlock and key for any signs of damage or manufacturing defects. Ensure the shackle moves freely and the key turns smoothly in the cylinder.
  2. Chìa khóa kiểm tra: Due to the "keyed alike" feature, any of the provided keys will open any of the six padlocks. Test each key with a padlock to confirm proper operation.
  3. Quản lý chính: Store spare keys in a secure, accessible location. Consider labeling keys if they are part of a larger keying system, though for this "alike key" set, all keys are interchangeable.

Hướng dẫn sử dụng

  1. Để mở khóa:
    • Insert one of the provided keys into the keyway at the bottom of the padlock.
    • Turn the key clockwise approximately 90 degrees.
    • The shackle will spring open. Remove the key.
  2. Khóa:
    • Close the shackle by pushing it down firmly into the padlock body until it clicks.
    • To ensure it is locked, gently pull on the shackle without the key inserted. If it does not open, it is securely locked.
    • The padlock can be locked without the key.

BẢO TRÌ

Xử lý sự cố

Vấn đềNguyên nhân có thểGiải pháp
Chìa khóa khó cắm hoặc khó xoay.Dirt or debris in keyway; lack of lubrication; bent key.Clean keyway with compressed air. Apply graphite lubricant. Do not force a bent key; use a new key.
Shackle is stiff or stuck.Corrosion or dirt in shackle mechanism; lack of lubrication.Apply lubricant to shackle openings. Work the shackle back and forth gently. Clean any visible debris.
Ổ khóa không khóa chắc chắn.Obstruction preventing shackle from fully engaging; internal mechanism damage.Ensure no debris is blocking the shackle. If the issue persists, the padlock may be damaged and require replacement.

Thông số kỹ thuật

Diagram showing dimensions of various padlock sizes, including body height, width, shackle clearance, and shackle diameter.

Image 2: Dimensional diagram illustrating key measurements for different padlock sizes. The Brady 133290 corresponds to the "Compact Padlocks" dimensions.

Thuộc tínhChi tiết
Số hiệu mẫu133290
Thương hiệuBrady
Vật liệuNhôm
Loại khóaKey Lock (Keyed Alike)
Body Dimensions (H x W)1.25 inch x 1.25 inch (31.8 mm x 31.8 mm)
Khoảng hở của cùm (Theo chiều dọc)1.00 inch (25.4 mm)
Đường kính cùm0.25 inch (6.4 mm)
Kích thước sản phẩm (Tổng thể)4.7 x 3.1 x 2 inches (per pack of 6); 1 Pound (per pack of 6)

Thông tin an toàn

Bảo hành và Hỗ trợ

Brady products are manufactured to high standards. For information regarding warranty coverage, technical support, or replacement parts, please contact Brady customer service directly. Refer to the official Brady webVui lòng xem trang web hoặc bao bì sản phẩm để biết thông tin liên hệ cập nhật nhất.

Nhà sản xuất: Brady

Webđịa điểm: www.bradycorp.com

Tài liệu liên quan - 133290

Trướcview Hướng dẫn sử dụng nhanh máy in nhãn Brady M211
Bắt đầu nhanh chóng với Máy in nhãn Brady M211. Hướng dẫn này bao gồm các bước sạc, lắp nhãn, tải ứng dụng, bật nguồn và kết nối Bluetooth.
Trướcview Hướng dẫn sử dụng máy in nhãn Brady M611 - Tính năng, thiết lập và hỗ trợ
Khám phá Máy in nhãn Brady M611 với hướng dẫn sử dụng toàn diện này. Tìm hiểu về thiết kế chắc chắn, kết nối không dây (Bluetooth, Wi-Fi), giao diện màn hình cảm ứng và tích hợp phần mềm để tạo nhãn chuyên nghiệp. Tìm hướng dẫn thiết lập, mẹo bảo trì và tài nguyên hỗ trợ kỹ thuật.
Trướcview Máy in nhãn Brady M410: Những câu hỏi thường gặp
Câu hỏi thường gặp toàn diện về Máy in nhãn Brady M410, bao gồm các tính năng, khả năng kết nối, khả năng tương thích nhãn, tích hợp phần mềm với Brady Workstation và thông tin hỗ trợ.
Trướcview Manuale Utente Stampante Etichette Brady M410
Hướng dẫn hoàn thành Sổ tay hướng dẫn sử dụngampTrước đây, Brady M410 đã có cấu hình đồng bộ, chức năng, hướng dẫn sử dụng và giải pháp khắc phục sự cố cho người sử dụng hiệu quả.
Trướcview Brady i4311 Quick Start Guide: Setup and Operation
Get started quickly with the Brady i4311 label printer. This guide provides essential setup instructions, operation details, and safety information for your Brady i4311.
Trướcview Hướng dẫn khởi động nhanh máy in nhãn Brady BMP®21-PLUS
Hướng dẫn này cung cấp thông tin thiết yếu để thiết lập và vận hành máy in nhãn cầm tay Brady BMP®21-PLUS. Tìm hiểu cách lắp pin, kết nối nguồn AC, thay hộp mực nhãn, sử dụng bàn phím, tạo, lưu, mở và in nhãn.