Samson HP30 Stereo Headphones User Manual
Model: SAM HP30 | Brand: SAMSON
Giới thiệu
The Samson HP30 Stereo Headphones are designed to deliver quality sound for various applications, from home studio use to on-the-go listening. These headphones feature a lightweight, closed-back design with an adjustable headband, ensuring a comfortable listening experience. Equipped with 40mm full-range drivers, they offer a wide frequency response from 20Hz to 20kHz and an impedance level of 32 ohms, providing balanced sound reproduction. They are suitable for use with keyboards, guitars, MP3 players, and other media devices.

Figure 1: Samson HP30 Stereo Headphones, showcasing their over-ear design and adjustable headband.
Cài đặt
The HP30 headphones are designed for straightforward connectivity. To begin using your headphones:
- Xác định giắc cắm âm thanh: The headphones come with a 3.5mm audio jack.
- Kết nối với thiết bị của bạn: Plug the 3.5mm audio jack into the corresponding audio output port on your device. This could be a keyboard, guitar amplifier, MP3 player, media player, laptop, desktop, tablet, or cellphone.
- Use the Adapter (if necessary): If your device requires a larger 1/4-inch connection, use the included 1/8-inch to 1/4-inch adapter. Attach the adapter to the 3.5mm jack before plugging it into your device.

Figure 2: The 3.5mm audio jack and the 1/4-inch adapter for versatile device compatibility.
Hướng dẫn sử dụng
Once connected, follow these steps for optimal use:
- Điều chỉnh băng đô: Gently extend or retract the adjustable headband to ensure a snug yet comfortable fit over your head. The earcups should fully cover your ears.
- Đặt tai nghe vào đúng vị trí: Ensure the earcups are properly positioned over your ears for maximum sound isolation and comfort. The closed-back design helps to minimize external noise.
- Kiểm soát âm lượng: Adjust the volume directly from your connected audio source (e.g., MP3 player, keyboard, computer). The HP30 headphones do not feature inline volume controls.
- Music Practice: For quiet music practice with instruments like keyboards or guitars, the HP30 provides clear and isolated audio monitoring, allowing you to focus on your sound without disturbing others.
BẢO TRÌ
To ensure the longevity and performance of your Samson HP30 Stereo Headphones, follow these maintenance guidelines:
- Vệ sinh: Use a soft, dry cloth to wipe the exterior of the headphones. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish and materials.
- Hướng dẫn bảo quản đệm tai: The earpads are made from protein leather. Gently wipe them with a damp nếu cần, hãy lau sạch bằng vải và để khô hoàn toàn trước khi sử dụng.
- Kho: When not in use, store the headphones in a clean, dry place away from extreme temperatures and direct sunlight. Avoid tangling the cable to prevent damage.
- Xử lý cáp: Always grasp the plug, not the cable, when connecting or disconnecting the headphones from a device to prevent internal wire damage.
Xử lý sự cố
If you encounter issues with your HP30 headphones, consider the following common solutions:
- Không có âm thanh:
- Ensure the audio jack is fully inserted into the device's port.
- Check the volume level on your audio source; it might be muted or set too low.
- Kiểm tra tai nghe bằng một nguồn âm thanh khác để loại trừ sự cố liên quan đến thiết bị.
- Kiểm tra xem cáp có bị hư hỏng hoặc gấp khúc không.
- Âm thanh bị méo:
- Hãy giảm âm lượng nguồn âm thanh của bạn.
- Ensure the audio jack and adapter (if used) are clean and free of debris.
- Test with another audio source to determine if the distortion is from the headphones or the source.
- Phù hợp không thoải mái:
- Adjust the headband carefully until a comfortable fit is achieved.
- Ensure the earcups are not pressing too hard or too loosely against your ears.
Thông số kỹ thuật
| Tính năng | Chi tiết |
|---|---|
| Tên mẫu | Tai nghe stereo |
| Thương hiệu | SAMSON |
| Vị trí tai | Trên tai |
| Công nghệ kết nối | Có dây |
| Kích thước trình điều khiển âm thanh | 40 milimét |
| Đáp ứng tần số | 20Hz - 20kHz |
| Trở kháng | 32 Ohm |
| Jack cắm tai nghe | Giắc cắm 3.5 mm |
| Kiểm soát tiếng ồn | Cách âm |
| Vật liệu | Da Protein |
| Tính năng đặc biệt | Nhẹ |
| Trọng lượng sản phẩm | 0.01 Ounce |
| Thiết bị tương thích | Laptops, Desktops, Tablets, Cellphones, Music Production Equipment |
Sản phẩm trênview Băng hình
Video 1: Một quan chức quaview of the Samson HP30 Stereo Headphones, highlighting key features such as 40mm full-range drivers, wide frequency response (20Hz to 20kHz), 32 ohms impedance, lightweight closed-back design, adjustable headband, and compatibility with various music instruments and media players via its 3.5mm jack.
Bảo hành và Hỗ trợ
For warranty information, technical support, or service inquiries regarding your Samson HP30 Stereo Headphones, please refer to the documentation included in your product packaging or visit the official SAMSON webtrang web. Giữ lại bằng chứng mua hàng để yêu cầu bảo hành.





