Akai Professional MPX16 User Manual

Giới thiệu

The Akai Professional MPX16 is an advanced sampler and player featuring sixteen backlit, velocity- and pressure-sensitive pads. Designed for portability, it offers convenient USB power or can be powered via the included power supply. Musicians, producers, and performers can record and trigger sound samples stored on standard SD or SDHC cards. Simply insert an SD card, assign its contents to any of the MPX16's pads, and the device is ready for performance.

For comprehensive sampling capabilities, the MPX16 includes core recording functionality via 1/4-inch stereo inputs or the onboard stereo microphone. Samples can be edited and manipulated using on-board processors for tuning, filtering, envelopes, and choke grouping on each pad, allowing for expressive and dynamic performances. The MPX16 integrates seamlessly into production and performance setups with its USB connectivity and onboard MIDI interface.

Cài đặt

To begin using your Akai Professional MPX16, follow these setup instructions:

1. Kết nối nguồn điện: Connect the MPX16 to a power source. This can be done via the included power supply unit (PSU) or through a USB connection to a computer or compatible USB power adapter.
2. Lắp thẻ SD: Locate the SD card slot on the device. Insert a standard SD or SDHC card (sold separately) into the slot. This card will be used to store and load your sampđồng nghiệp.
3. Kết nối âm thanh: For recording, connect your audio source to the 1/4-inch stereo inputs. For output, connect the main out ports to your mixer, amplifier, or headphones.
4. Kết nối USB/MIDI: If integrating with a computer or other MIDI devices, connect the MPX16 via its USB port or MIDI IN/OUT ports.

Hình 1: Từ trên xuống view of the Akai Professional MPX16, showing the 16 pads, display, and control knobs.

Hình 2: Phía sau view of the Akai Professional MPX16, highlighting the USB port, MIDI IN/OUT, 1/4-inch stereo inputs, and power input.

Hướng dẫn sử dụng

Loading and Triggering Samptập

• Thẻ SD: Ensure your SD or SDHC card contains .WAV samples (16-bit/48kHz resolution recommended).
• Chỉ định Sampcác bạn: Use the device's display and navigation controls to browse samples on your SD card and assign them to the 16 velocity-sensitive pads.
• Kích hoạt: Strike the backlit pads to trigger assigned samples. The pads are velocity-sensitive, allowing for dynamic performances.

Ghi âm Samptập

• Nguồn vào: Connect an audio source to the 1/4-inch stereo inputs or use the onboard stereo microphone.
• Chức năng ghi âm: Access the recording function via the device's menu. Follow the on-screen prompts to capture new samples directly to your SD card.

Sample Editing and Manipulation

• On-board Processors: Utilize the integrated processors to fine-tune your samples. Options include sample tuning, filtering, and envelope adjustments.
• Choke Grouping: Configure choke groups for pads to create realistic drum machine behavior, where one sample cuts off another.

MIDI Integration

• MIDI USB: Connect the MPX16 to a computer via USB for MIDI control of software instruments or to use the MPX16 as a controller.
• MIDI VÀO/RA: Use the 5-pin MIDI IN/OUT ports to connect with external MIDI hardware.

BẢO TRÌ

To ensure the longevity and optimal performance of your Akai Professional MPX16, observe the following maintenance guidelines:

• Vệ sinh: Hãy dùng khăn mềm, khô để lau sạch bên ngoài thiết bị. Tránh sử dụng chất tẩy rửa có tính ăn mòn hoặc dung môi.
• Kho: Store the MPX16 in a cool, dry place away from direct sunlight, extreme temperatures, and humidity.
• Xử lý: Handle the device with care to prevent physical damage to the pads, knobs, and ports.

Xử lý sự cố

If you encounter issues with your Akai Professional MPX16, refer to the following common troubleshooting steps:

• Không có điện: Ensure the power supply is securely connected or the USB cable is providing sufficient power. Try a different power outlet or USB port.
• Không có âm thanh: Check all audio cable connections. Verify that the volume levels on the MPX16 and any connected audio equipment are appropriately set.
• Thẻ SD không đọc được: Ensure the SD card is properly inserted. Check that the card is formatted correctly (FAT32) and contains compatible .WAV files.
• Pads Unresponsive: Confirm the device is powered on and not in a locked mode. If connected via MIDI, check MIDI channel settings.
• Các vấn đề về kết nối MIDI: Verify USB or MIDI cable connections. Check MIDI settings on both the MPX16 and your computer/external device.

Thông số kỹ thuật

Bảo hành và Hỗ trợ

For warranty information and technical support, please refer to the official Akai Professional webtrang web hoặc liên hệ với bộ phận chăm sóc khách hàng của họ. Hãy giữ lại hóa đơn mua hàng để yêu cầu bảo hành.