i-tec USB 2.0 to 10/100 Fast Ethernet Adapter User Manual

1. Giới thiệu

The i-tec USB 2.0 Fast Ethernet Adapter provides an external 100/10Mbps network connection via a USB interface. This adapter allows you to add a network card to your computer, notebook, or tablet without requiring an external power supply. It supports a wide range of operating systems, including Windows, macOS, Linux, ChromeOS, and Android. For Android systems, Ethernet support must be integrated by the device manufacturer, which can typically be verified in the device's Network Connection Settings.

2. Nội dung gói hàng

Vui lòng kiểm tra xem có đầy đủ các mục trong gói hàng của bạn không:

• Bộ điều hợp Ethernet nhanh i-tec USB 2.0
• Hướng dẫn sử dụng
• Driver & Manuals CD (Note: Drivers are often automatically installed by modern operating systems.)

3. Tính năng

The i-tec USB 2.0 Fast Ethernet Adapter offers the following features:

• Kết nối: USB 2.0 Type A male port for host connection and RJ-45 port for Ethernet cable connection.
• Tốc độ mạng: Supports 10/100Mbps Fast Ethernet.
• Quyền lực: Powered directly via the USB port; no external power supply required.
• Chuyển dữ liệu: Supports Full-Duplex and Half-Duplex transfers.
• Chức năng nâng cao: Includes Wake-on-LAN (WoL) and Stand-by-Mode functions.
• Chỉ báo trạng thái: Features an LED display (green/yellow) for network status.
• Bộ chip: Utilizes an Axis AX88772B chipset with SRAM for efficient data transfers.
• Khả năng tương thích của hệ điều hành: Compatible with Windows XP, 7 (32/64 bit), 8 (32/64 bit), macOS 10.6-10.8, Android 1.x/2.x/3.x/4.x, and Linux kernel 2.6.14 and above.

4. Thiết lập

Follow these steps to set up your i-tec USB 2.0 Fast Ethernet Adapter:

1. Kết nối với thiết bị chủ: Plug the USB 2.0 Type A connector of the adapter into an available USB port on your computer, notebook, or compatible Android device.
2. Cài đặt trình điều khiển: In most modern operating systems (Windows 10/11, recent macOS, Linux distributions), the necessary drivers will install automatically upon connection (Plug & Play). If automatic installation does not occur, or if you are using an older OS, you may need to install drivers from the included CD or download them from the i-tec webđịa điểm.
3. Kết nối với mạng: Connect a standard Ethernet (RJ-45) cable from your router, modem, or network switch to the RJ-45 port on the i-tec adapter.
4. Xác minh kết nối: Observe the LED indicators on the adapter. A solid or blinking LED typically indicates a successful network connection and activity. Check your operating system's network settings to confirm the Ethernet connection is active.

5. Hướng dẫn vận hành

Once the adapter is successfully installed and connected, it functions as a standard Ethernet network interface. Your operating system will automatically detect and utilize the wired connection for internet access or local network communication.

• Tình trạng mạng: The green/yellow LED on the adapter indicates network link status and activity. A solid light typically means a link is established, while a blinking light indicates data transfer.
• Wake-on-LAN (WoL): If supported by your computer's BIOS/UEFI and operating system settings, the adapter can receive a 'magic packet' to wake your computer from a low-power state over the network.
• Stand-by-Mode: The adapter is designed to operate efficiently in low-power states.

KHAI THÁC. Xử lý sự cố

If you encounter issues with your i-tec USB 2.0 Fast Ethernet Adapter, consider the following:

• Không có kết nối mạng:
  • Ensure the adapter is firmly plugged into a working USB port on your device.
  • Hãy kiểm tra xem cáp Ethernet đã được kết nối chắc chắn với cả bộ chuyển đổi và bộ định tuyến/modem của bạn chưa.
  • Check the LED indicators on the adapter. If they are off, try a different USB port or cable.
  • Khởi động lại máy tính và thiết bị mạng (bộ định tuyến/modem).
• Drivers Not Installing:
  • For Windows, check Device Manager for unrecognized devices and attempt to update drivers.
  • Install drivers manually from the provided CD or the i-tec support webđịa điểm.
• Tốc độ kết nối chậm:
  • Ensure your Ethernet cable is not damaged.
  • Verify that your network equipment (router/modem) is functioning correctly.
  • This adapter supports 10/100Mbps Fast Ethernet. If you expect Gigabit speeds, this adapter is not designed for that.
• Khả năng tương thích với thiết bị Android:
  • Not all Android devices support USB Ethernet adapters. Check your device's specifications or network settings for 'Ethernet' options.

7. Thông số kỹ thuật

8. Bảo hành và Hỗ trợ

i-tec products are designed for reliability and performance. For information regarding warranty terms and conditions, please refer to the warranty card included with your product or visit the official i-tec website. For technical support, driver downloads, or further assistance, please visit the i-tec support section on their official webđịa điểm.