JJC TMC LCD Timer Remote Control Instruction Manual

Giới thiệu

The JJC TMC LCD Timer Remote Control is a versatile device designed for advanced camera control, functioning as both a remote shutter release and a programmable intervalometer. It is ideal for various photography techniques, including time-lapse, long exposure, and self-portraits, by preventing camera shake and offering precise timing control.

Sản phẩm trênview

Thành phần và điều khiển

Familiarize yourself with the main components and controls of your JJC TMC remote control:

Hình ảnh 1: Đằng trước view of the JJC TMC remote control with key components labeled, including the control panel, shutter release button, LED light/lock button, arrow buttons, timer start/stop button, and SET button.

Hình ảnh 2: Detailed diagram illustrating the numbered parts of the JJC TMC controller and the various indicators on its LCD screen, such as selection cursor, timer display, LOCK indicator, low power indicator, timer active indicator, speaker ON/OFF, SET indicator, RELEASE indicator, and number of shots.

Chỉ báo màn hình LCD

• Đức: Delay Timer (initial delay before sequence starts)
• BẠN: Bulb Timer (long exposure duration)
• TRÍCH DẪN: Interval Timer (time between shots)
• N: Number of Shots (total exposures)
• Con trỏ lựa chọn: Indicates the currently adjustable parameter.
• Hiển thị hẹn giờ: Shows current time settings.
• Chỉ báo KHÓA: Appears when buttons are locked.
• Chỉ báo nguồn điện thấp: Cảnh báo khi pin yếu.
• Timer Active Indicator: Shows when a timer sequence is running.
• BẬT/TẮT loa: Cho biết trạng thái phản hồi âm thanh.
• Chỉ báo SET: Appears when a setting is being adjusted.
• RELEASE Indicator: Appears when the shutter is being released.

Cài đặt

1. Lắp đặt pin

1. Xác định vị trí ngăn chứa pin ở mặt sau của điều khiển từ xa.
2. Trượt mở nắp pin.
3. Lắp hai pin AAA, đảm bảo lắp đúng cực (+/-).
4. Đóng chặt nắp pin.

2. Kết nối với máy ảnh

1. Ensure both the camera and the remote control are powered off.
2. Locate the remote control terminal on your Canon EOS camera (refer to your camera's manual for exact location).
3. Insert the remote control's cable plug firmly into the camera's remote control terminal.
4. Power on the remote control using the ON/OFF switch.

Hình ảnh 3: The JJC TMC remote control connected to a Canon camera via its cable, demonstrating proper connection for operation.

Hướng dẫn sử dụng

Basic Shutter Release Function

• Nhấn nửa chừng: Press the Shutter Release Button halfway down to activate autofocus.
• Nhấn hết cỡ: Press the Shutter Release Button completely down to trigger the camera's shutter.
• Shutter Lock (for Bulb mode): For long exposures in Bulb mode, press the Shutter Release Button fully down and slide it upwards to lock it. This keeps the shutter open until you slide it back down.

Programming Timer Functions

The remote control allows programming of four main timer functions: Delay (DE), Bulb (BU), Interval (INT), and Number of Shots (N).

1. Bật nguồn: Bật điều khiển từ xa bằng công tắc BẬT/TẮT.
2. Chọn tham số: Sử dụng Nút mũi tên (up/down) to move the selection cursor between DE, BU, INT, and N on the LCD display.
3. Điều chỉnh giá trị: Once a parameter is selected, press the Nút ĐẶT. The digits will flash. Use the Nút mũi tên (left/right) to select the digit to change, and the Nút mũi tên (up/down) to adjust the value (hours, minutes, seconds).
4. Xác nhận cài đặt: Nhấn nút Nút ĐẶT again to confirm the value and move to the next digit or parameter.
5. Set Number of Shots (N): For 'N', you can set a value from 1 to 399. To set for unlimited shots, select 'N' and adjust until '--' is displayed.
6. Start Timer Sequence: After setting all desired parameters, press the Nút Bắt đầu / Dừng hẹn giờ to begin the programmed sequence. The 'TIMER ACTIVE' indicator will appear.
7. Stop Timer Sequence: Nhấn nút Nút Bắt đầu / Dừng hẹn giờ again to stop an active sequence.

Chức năng khóa

To prevent accidental button presses during a timer sequence or long exposure, press the Đèn LED / Nút khóa. The 'LOCK' indicator will appear on the LCD. Press it again to unlock.

Chức năng đèn nền

Nhấn nút Đèn LED / Nút khóa briefly to activate the LCD backlight for visibility in low-light conditions. The backlight will automatically turn off after a few seconds.

BẢO TRÌ

• Vệ sinh: Hãy dùng khăn mềm, khô để lau điều khiển từ xa. Không sử dụng chất tẩy rửa dạng lỏng hoặc dung môi.
• Thay thế pin: When the low power indicator appears, replace both AAA batteries promptly to ensure optimal performance.
• Kho: Store the remote control in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods to prevent leakage.
• Chăm sóc cáp: Avoid bending or twisting the connection cable excessively to prevent damage.

Xử lý sự cố

Remote control does not power on:

Check if batteries are inserted correctly with proper polarity. Replace with fresh AAA batteries.

Camera does not respond to shutter release:

Ensure the cable is securely connected to both the remote and the camera. Verify the camera is powered on and in a compatible shooting mode (e.g., P, Av, Tv, M, Bulb). Check camera battery level.

Timer sequence does not start or stops unexpectedly:

Confirm all timer parameters (DE, BU, INT, N) are set correctly. Ensure the 'TIMER ACTIVE' indicator is on. Check battery level. Note that turning off the remote control will reset all programmed settings.

Màn hình LCD mờ hoặc không hiển thị gì:

Replace batteries. Use the backlight function in low light conditions.

Thông số kỹ thuật

Bảo hành và Hỗ trợ

Để biết thông tin về bảo hành và hỗ trợ kỹ thuật, vui lòng tham khảo trang web chính thức của JJC. webhoặc liên hệ với nhà bán lẻ. Giữ lại biên lai mua hàng để yêu cầu bảo hành.