Hướng dẫn sử dụng Chân đèn cơ bản ProMaster LS1(N) (Model 9245)
Giới thiệu
The ProMaster LS1(N) light stand is a basic, lightweight stand designed for supporting smaller studio lights, LED panels, or camera-mounted flashes. This manual provides essential information for its safe and effective use.
Các tính năng chính
- Thiết kế nhẹ và di động.
- Adjustable height for versatile lighting setups.
- Standard 1/4-inch screw mount for broad compatibility with various lighting equipment.
- Durable aluminum alloy construction.
- Stable tripod base.
Hướng dẫn thiết lập
Follow these steps to correctly set up your ProMaster LS1(N) Basic Light Stand:
- Unpack the light stand from its carrying bag.
- Đặt chân đế trên bề mặt phẳng và chắc chắn.
- Gently spread the tripod legs until they are fully extended and stable.
- Loosen the locking knobs on each section of the central column.
- Extend the central column to the desired height.
- Tighten all locking knobs securely to prevent slippage.
- Attach your lighting equipment to the 1/4-inch screw mount at the top of the stand. Ensure it is securely fastened.
Figure 1: The ProMaster LS1(N) light stand shown fully extended with its tripod legs spread for stability.
Video 1: Demonstration of unfolding and adjusting a similar light stand, including attaching a light and using sandbags for stability.
Video 2: Visual guide on setting up and adjusting a light stand, highlighting its lightweight and portable nature.
Hướng dẫn sử dụng
The ProMaster LS1(N) light stand offers simple adjustments for optimal lighting.
Điều chỉnh chiều cao
- To adjust the height, loosen the locking knobs on the central column sections.
- Carefully raise or lower the sections to achieve the desired height.
- Always re-tighten all locking knobs firmly after adjustment to ensure stability.
Gắn phụ kiện
The top of the stand features a universal 1/4-inch screw mount.
- Screw your light, camera, or other compatible accessory onto this mount.
- Ensure the accessory is tightened securely to prevent accidental detachment.
Hình 2: Cận cảnh view of the ProMaster LS1(N) light stand's top mount with a studio light attached, demonstrating its compatibility.
Chăm sóc và bảo dưỡng
- Regularly inspect all locking mechanisms and screws for tightness.
- Lau sạch chân đế bằng vải mềm, khô. Tránh sử dụng chất tẩy rửa có tính mài mòn hoặc dung môi.
- Store the stand in its carrying bag in a dry, cool place when not in use to protect it from dust and damage.
- Do not overload the stand beyond its recommended weight capacity.
Xử lý sự cố
Stand Instability
- Ensure all tripod legs are fully extended and evenly spread.
- Verify that all locking knobs are securely tightened.
- If using heavy equipment, consider adding sandbags to the base for increased stability.
Khó khăn khi điều chỉnh chiều cao
- Check that all locking knobs are sufficiently loosened before attempting to adjust the height.
- Ensure no debris is obstructing the telescoping sections.
Thông số kỹ thuật sản phẩm
| Tính năng | Chi tiết |
|---|---|
| Số hiệu mẫu | LS1 |
| Product Dimensions (collapsed) | 28.6 x 2.8 x 2.8 inch |
| Trọng lượng sản phẩm | 2 pound |
| Nhà sản xuất | Bậc thầy chuyên nghiệp |
| Vật liệu | Hợp kim nhôm |
| Chiều cao tối đa | 73.6 inch (khoảng 6.1 feet) |
| Vít lắp | 1/4-inch universal |
Bảo hành và Hỗ trợ
For warranty information or technical support regarding your ProMaster LS1(N) Basic Light Stand, please refer to the official ProMaster webhoặc liên hệ trực tiếp với bộ phận chăm sóc khách hàng của họ. Giữ lại hóa đơn mua hàng để làm bằng chứng mua hàng.