Eheim 6675

Hướng dẫn sử dụng Bộ lắp đặt Eheim 2 - Phía áp suất - 594 (4005310)

Giới thiệu

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Eheim Installation Set 2 - Pressure Side, model 594 (part number 4005310). This set is designed to optimize the return water diffusion from your aquarium filter, creating various flow patterns and surface agitation. Please read these instructions carefully before use to ensure proper function and longevity of the product.

Thành phần sản phẩm

The Eheim Installation Set 2 includes the following components:

Spray bar sections
Đầu nối khuỷu tay
Straight connectors
cuối nắp
Đế hút chân không để gắn
Bộ chuyển đổi ống

Eheim Installation Set 2 components in packaging

Hình 1: Eheim Installation Set 2 components as packaged. This image displays the various parts included in the set, such as spray bar sections, connectors, and suction cups, alongside the product box.

Assembled Eheim Installation Set 2 spray bar

Hình 2: Assembled Eheim Installation Set 2 spray bar. This image shows the spray bar fully assembled with its various sections, elbow, and suction cups, ready for installation.

Hướng dẫn an toàn

Always disconnect power to all aquarium equipment before performing any installation or maintenance.
Đảm bảo mọi kết nối đều an toàn để tránh rò rỉ.
This product is designed for use with aquarium filters on the pressure (return) side only.
Để xa tầm tay trẻ em.
Không được phép sửa đổi sản phẩm theo bất kỳ cách nào không được mô tả trong hướng dẫn này.

Thiết lập và cài đặt

Sự chuẩn bị: Ensure your aquarium filter is turned off and disconnected from power.
Cuộc họp: Connect the spray bar sections using the provided straight and elbow connectors. The modular design allows for various lengths and angles to suit your aquarium dimensions and desired flow pattern. Ensure all connections are firmly seated.
Nối ống: Attach the appropriate hose adapter to one end of the assembled spray bar. Connect this adapter to the return hose from your external aquarium filter. This set is designed for installation on the return side of the filter.
Vị trí: Place the assembled spray bar inside your aquarium. Use the suction cups to securely mount the spray bar to the aquarium glass. Position it to achieve optimal water distribution and surface agitation. The spray bar can be rotated to direct the water flow.
Kiểm tra cuối cùng: Once installed, ensure all connections are tight and the spray bar is securely mounted. Reconnect power to your filter and observe the water flow.

Ghi chú: The spray bar can be configured to diffuse water across the surface for increased oxygenation or directed downwards for deeper water circulation.

Hướng dẫn sử dụng

The Eheim Installation Set 2 operates passively by diffusing the filtered water returned from your aquarium filter. Once installed and the filter is running, water will exit through the small holes along the spray bar.

Water Flow Direction: The spray bar can be rotated within its mounts to adjust the direction of the water jets. This allows you to direct flow towards the surface for aeration or deeper into the tank for circulation.
Surface Agitation: Directing the spray bar towards the water surface will create ripples, enhancing gas exchange and oxygen levels in the aquarium.
Tuần hoàn nước: Directing the spray bar slightly downwards or horizontally will improve water circulation throughout the tank, helping to distribute nutrients and prevent stagkhu nant.

BẢO TRÌ

Regular maintenance ensures optimal performance and prevents blockages.

Tần suất làm sạch: Inspect the spray bar monthly for algae or debris buildup. Clean as needed, or during routine filter maintenance.
Tháo gỡ: Disconnect the spray bar from the filter hose and remove it from the aquarium.
Quy trình vệ sinh: The spray bar sections can be separated. Use a soft brush or pipe cleaner to remove any algae or detritus from inside the tubes and from the spray holes. The end cap is removable for easier access to the interior for cleaning.
Lắp ráp lại: After cleaning, reassemble the spray bar sections, ensuring all connections are secure. Reinstall in the aquarium as per the Setup instructions.

Xử lý sự cố

Vấn đề	Nguyên nhân có thể	Giải pháp
Reduced water flow from spray bar	Algae or debris blocking spray holes. Filter flow rate is low. Ống bị gập hoặc tắc nghẽn.	Clean the spray bar and holes (see Maintenance). Check and clean your aquarium filter. Inspect the filter return hose for kinks or blockages.
Spray bar detaches from glass	Suction cups are old or dirty. Insufficient number of suction cups used.	Clean suction cups and aquarium glass thoroughly. Replace worn suction cups if necessary. Ensure all provided suction cups are used and properly secured.
Rò rỉ nước từ các kết nối	Connections not fully seated. Damaged O-rings or connectors.	Disassemble and reassemble connections, ensuring they are pushed together firmly. Inspect O-rings and connectors for damage; replace if necessary.

Thông số kỹ thuật

Thương hiệu	Eheim
Số hiệu mẫu	4005310 (also known as 594, Item Model Number 6675)
Kích thước sản phẩm (sau khi lắp ráp)	Khoảng 1 x 1 x 7.5 inch (2.54 x 2.54 x 19.05 cm)
Trọng lượng sản phẩm	0.35 pound (5.6 ounce)
Khả năng tương thích	Designed for return side of aquarium filters, typically with 5/8" ID tubing.
Vật liệu	Durable aquarium-safe plastic

Bảo hành và Hỗ trợ

For warranty information or technical support regarding your Eheim Installation Set 2, please refer to the documentation provided with your original purchase or contact Eheim customer service directly. Contact details can typically be found on the Eheim official webbao bì sản phẩm hoặc trang web.

Nhà sản xuất: TopDawg Pet Supply (as per product listing)