Kienzle SATELLITE III Quartz Radio-Controlled Alarm Clock User Manual

1. Giới thiệu

Thank you for choosing the Kienzle SATELLITE III Quartz Radio-Controlled Alarm Clock. This manual provides detailed instructions for setting up, operating, and maintaining your alarm clock to ensure optimal performance. Please read this manual thoroughly before use and retain it for future reference.

2. Thông tin an toàn

• Không để thiết bị ở nơi có nhiệt độ quá cao, ánh nắng trực tiếp hoặc độ ẩm cao.
• Avoid dropping the alarm clock or subjecting it to strong impacts.
• Không tự ý mở hoặc sửa chữa thiết bị. Vui lòng liên hệ nhân viên có trình độ để được bảo dưỡng.
• Vứt bỏ pin đã qua sử dụng theo quy định của địa phương.
• Để thiết bị xa tầm tay trẻ em.

3. Nội dung gói hàng

• Kienzle SATELLITE III Quartz Radio-Controlled Alarm Clock
• 1 x Pin AA (bao gồm)
• Hướng dẫn sử dụng (tài liệu này)

4. Sản phẩm hếtview

The Kienzle SATELLITE III is a compact, radio-controlled alarm clock featuring a clear analog display, dial illumination, and a snooze function. Its design prioritizes ease of use and reliable timekeeping.

5. Thiết lập

5.1 Lắp đặt pin

1. Hãy tìm nắp đậy ngăn chứa pin ở phía sau đồng hồ báo thức.
2. Carefully slide or lift the cover to open the compartment. Note: The battery compartment may be stiff to open initially.
3. Insert the included AA battery, ensuring the correct polarity (+ and -) as indicated inside the compartment.
4. Lắp lại nắp ngăn chứa pin một cách an toàn.

5.2 Initial Time Setting (Radio-Controlled)

After battery installation, the clock will automatically attempt to receive the radio time signal. This process may take several minutes. Place the clock near a window for better reception. Once the signal is received, the clock will set itself to the correct time.

5.3 Manual Time Setting (If Radio Signal is Unavailable)

If the radio signal cannot be received or if you prefer to set the time manually:

1. Locate the time setting knob on the back of the clock.
2. Rotate the knob to adjust the hour and minute hands to the desired time.

6. Hướng dẫn vận hành

6.1 Đặt báo thức

1. Hãy tìm núm điều chỉnh báo thức ở phía sau đồng hồ.
2. Rotate the alarm setting knob to move the alarm hand to your desired wake-up time. The alarm setting features distinct clicks for precise adjustment, typically in 10-minute increments.
3. To activate the alarm, locate the alarm ON/OFF switch (usually a small slider or button) on the back or side of the clock and set it to the 'ON' position. When the alarm is active, the second hand will stop moving, and the clock will operate silently.

6.2 Using the Snooze Function

Khi báo thức kêu:

• Press the snooze/light button, typically located on the top or back of the clock. This will temporarily silence the alarm.
• The alarm will sound again after approximately 5-6 minutes. This cycle can be repeated for up to 45 minutes.

6.3 Chiếu sáng mặt số

To illuminate the clock dial in low light conditions:

• Press the light button, usually combined with the snooze button, located on the top or back of the clock. The dial will light up for a few seconds.

7. Bảo trì

7.1 Vệ sinh

Wipe the alarm clock with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the casing hoặc quay số.

7.2 Thay thế pin

When the clock's display dims, the alarm weakens, or the clock stops functioning, it is time to replace the battery. Follow the battery installation steps in Section 5.1. Ensure you use a fresh AA battery.

KHAI THÁC. Xử lý sự cố

• Clock not displaying correct time: Ensure the battery is correctly installed and has sufficient power. If it's a radio-controlled clock, ensure it's in a location with good signal reception. Try manual time setting if the radio signal is consistently poor.
• Báo động không kêu: Check that the alarm is activated (ON position) and that the alarm time is correctly set. Ensure the battery has sufficient power.
• Poor radio signal reception: Move the alarm clock to a different location, preferably near a window and away from electronic devices that may cause interference. Allow sufficient time for the clock to synchronize.
• Khó mở ngăn chứa pin: Apply gentle, even pressure when sliding or lifting the cover. Avoid using excessive force to prevent damage.

9. Thông số kỹ thuật

• Người mẫu: SATELLITE III (V71097339280)
• Kiểu: Quartz Radio-Controlled Alarm Clock
• Kích thước (C x R x S): Khoảng 77 x 75 x 42 mm
• Nguồn điện: 1 x Pin AA
• Đặc trưng: Dial illumination, alarm repeat (snooze), silent operation when alarm is active, precise alarm setting.

10. Bảo hành và Hỗ trợ

Kienzle products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or contact your retailer. For technical support or further assistance, please contact Kienzle customer service through their official website or the contact information provided by your point of purchase.