Giới thiệu
Cảm ơn bạn đã muaasing the Lexon On/Off 3 Position LCD Alarm Clock, model LR98-B. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new alarm clock. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.
Nội dung gói
- Lexon On/Off 3 Position LCD Alarm Clock (LR98-B)
- Pin AAA x 2
- Hướng dẫn sử dụng (tài liệu này)
Sản phẩm trênview
The Lexon LR98-B is a unique digital alarm clock designed for intuitive use. Its innovative "on/off" mechanism allows you to activate or deactivate the alarm simply by rotating the clock to one of its three positions. The clear LCD display shows the time, and an EL backlight provides visibility in low-light conditions.
This image displays the Lexon On/Off 3 Position LCD Alarm Clock, model LR98-B, in its black finish. The clock is shown in an angled position, with the digital display clearly visible, indicating '12:30 PM'. The unique 'on/off' design is evident in its angled structure, where rotating the clock changes its operational state.
Cài đặt
1. Lắp đặt pin
- Hãy tìm nắp đậy ngăn chứa pin ở phía sau đồng hồ báo thức.
- Remove the cover by sliding or gently prying it open.
- Lắp hai (2) pin AAA, đảm bảo đúng cực (+ và -) như được chỉ dẫn bên trong ngăn chứa.
- Lắp lại nắp ngăn chứa pin một cách an toàn.
2. Bật nguồn ban đầu
Once batteries are installed, the LCD display should activate. If not, check battery placement or replace with fresh batteries.
Hướng dẫn sử dụng
The Lexon LR98-B features a unique "on/off" function controlled by its physical orientation. The clock has buttons on the back for setting time and alarm.
Thiết lập thời gian
- Locate the time setting buttons on the back of the clock (usually labeled "SET" or "TIME" and "+" / "-").
- Press and hold the "SET" or "TIME" button until the hour digits begin to flash.
- Use the "+" and "-" buttons to adjust the hour. Pay attention to the AM/PM indicator if present.
- Press the "SET" or "TIME" button again to move to the minute setting.
- Use the "+" and "-" buttons to adjust the minutes.
- Press "SET" or "TIME" one last time to confirm and exit time setting mode.
Cài đặt báo thức
- Locate the alarm setting buttons on the back of the clock (usually labeled "ALARM" and "+" / "-").
- Press and hold the "ALARM" button until the alarm hour digits begin to flash.
- Sử dụng nút "+" và "-" để điều chỉnh giờ báo thức.
- Press the "ALARM" button again to move to the alarm minute setting.
- Use the "+" and "-" buttons to adjust the alarm minutes.
- Press "ALARM" one last time to confirm and exit alarm setting mode.
Using the On/Off Function
The Lexon LR98-B features a unique physical on/off switch. The clock has three positions:
- Alarm ON Position: When the clock is oriented in a specific way (e.g., with "ON" facing upwards or a designated side), the alarm function is active. A small indicator (e.g., an alarm icon) may appear on the display.
- Alarm OFF Position: When the clock is rotated to another specific orientation (e.g., with "OFF" facing upwards or a different designated side), the alarm function is deactivated. The alarm indicator will disappear from the display.
- Time Display Position: A third position might exist for simply displaying the time without alarm functionality being explicitly on or off, or it might be a neutral position. Refer to the markings on your specific device.
To activate or deactivate the alarm, simply rotate the clock to the desired position. The display will visually confirm the alarm status.
Đèn nền EL
To illuminate the display in dark conditions, press the "EL" button located on the back of the clock. The backlight will typically stay on for approximately 3 seconds.
Hourly Time Signal (Chime)
The clock is equipped with an hourly time signal function. To activate or deactivate this feature, refer to the specific button or combination of buttons on the back of your device, often labeled "CHIME" or integrated with the "SET" button. Consult the markings on your clock for precise control.
BẢO TRÌ
- Vệ sinh: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or display.
- Thay thế pin: Replace batteries when the display dims or the clock functions become erratic. Always replace both batteries simultaneously with new AAA batteries.
- Kho: Nếu cất giữ đồng hồ trong thời gian dài, hãy tháo pin ra để tránh rò rỉ.
- Môi trường: Avoid exposing the clock to extreme temperatures, direct sunlight, high humidity, or strong magnetic fields.
Xử lý sự cố
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Màn hình trống hoặc mờ. | Pin yếu hoặc hết; lắp pin không đúng cách. | Thay pin cũ bằng pin AAA mới; đảm bảo lắp đúng cực. |
| Chuông báo động không kêu. | Alarm is not set; clock is in "OFF" position; alarm volume is too low (if adjustable). | Ensure alarm time is set correctly; rotate clock to "ON" position; check for volume controls if applicable. |
| Thời gian không chính xác. | Time was not set correctly; power interruption (if not battery-backed). | Reset the time according to the "Setting the Time" instructions. |
Thông số kỹ thuật
- Người mẫu: LR98-B (Manufacturer Model Number: 2910200 LR98-B)
- Thương hiệu: Tiếng Việt
- Kiểu hiển thị: LCD kỹ thuật số
- Nguồn điện: 2 x Pin AAA
- Vật liệu: ABS (Acrylonitrile Butadiene Styrene)
- Kích thước (Rộng x Sâu x Cao): 5.3 x 1.4 x 3.1 inch (13.5 x 3.5 x 8 cm)
- Cân nặng: 0.13 kg (4.6 ounce)
- Tính năng đặc biệt: On/Off 3 Position Function, EL Backlight, Hourly Tín hiệu thời gian
- Kiểu lắp đặt: Bàn
- Nước xuất xứ: Trung Quốc
Bảo hành và Hỗ trợ
Lexon products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your purchase or visit the official Lexon webtrang web. Vui lòng giữ lại bằng chứng mua hàng để yêu cầu bảo hành.
For further assistance, you may contact Lexon customer support through their official channels.
