Hướng dẫn sử dụng xe đạp điện EOEOTWO E01

1. Giới thiệu

Welcome to the EOEOTWO E01 Electric Bike user manual. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new electric bicycle. Please read this manual thoroughly before your first ride to ensure optimal performance and safety.

The EOEOTWO E01 is a powerful electric mountain bike designed for various terrains, featuring a 1000W (1500W peak) high-speed motor, a 48V 15Ah removable lithium battery, and 26"x4.0 fat tires. It offers a top speed of up to 34 MPH and a range of approximately 60 miles with pedal assist.

2. Hướng dẫn an toàn

⚠️ WARNING: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.

• Always wear a helmet and appropriate protective gear (gloves, knee pads, elbow pads) when riding.
• Do not ride at high speeds in crowded areas or on public roads where speed limits apply.
• Familiarize yourself with the vehicle's performance in a safe, open area before riding in complex environments. Pay particular attention to braking distance and acceleration feel.
• Before each ride, perform a pre-ride check: verify tire pressure, test braking performance, and ensure all screws and fasteners are securely tightened.
• Avoid submerging the electric bike in water or riding in heavy rain to prevent damage to the electrical system.
• Keep hands and feet away from moving parts, especially the chain and wheels.
• Do not modify the bike's electrical system or components, as this may void the warranty and create safety hazards.

3. Nội dung gói hàng

Khi mở hộp, vui lòng đảm bảo có đầy đủ tất cả các mục được liệt kê dưới đây:

• EOEOTWO E01 Electric Bike
• Pin (lắp sẵn hoặc riêng biệt)
• Hướng dẫn sử dụng
• Accessory Kit (includes hex key/Allen wrench, pedal wrench)
• Bộ sạc
• Cycling Phone Holder

4. Thông số kỹ thuật

5. Hướng dẫn lắp ráp

For transportation convenience, your EOEOTWO E01 electric bike requires some basic assembly upon arrival. This typically includes installing the front wheel, handlebars, pedals, and adjusting the brakes. A full set of installation tools (hex key, pedal wrench) is provided in the package. Detailed installation video tutorials are available and can guide you through the process, which usually takes approximately 20 minutes.

5.1. General Assembly Steps (Refer to video tutorials for detailed guidance):

1. Tháo hộp: Cẩn thận loại bỏ tất cả các thành phần khỏi bao bì.
2. Lắp đặt bánh trước: Attach the front wheel to the front fork, ensuring the disc brake rotor is correctly aligned with the caliper. Secure with the quick-release skewer or axle nuts.
3. Lắp đặt tay lái: Mount the handlebar onto the stem, ensuring it is centered and tightened securely. Adjust the angle for comfortable riding.
4. Cài đặt bàn đạp: Identify the left (L) and right (R) pedals. Thread the pedals into the crank arms. Remember that the left pedal has a reverse thread. Tighten firmly with the pedal wrench.
5. Lắp đặt cốt yên và yên xe: Insert the seat post into the frame and adjust the saddle height to your preference. Secure with the quick-release clamp.
6. Tệp đính kèm phụ kiện: Install the cycling phone holder and any other accessories as desired.
7. Kiểm tra trước khi đi: Before your first ride, thoroughly check all connections, brake functionality, and tire pressure.

6. Hoạt động

6.1. Bật / Tắt nguồn

Locate the power button on the vibrant LED instrument panel. Press and hold to power on or off the electric bike. The display will show key information such as speed, battery level, and mileage.

6.2. Chế độ cưỡi ngựa

The EOEOTWO E01 offers 5 distinct riding modes to suit various conditions and preferences:

1. Chế độ ga: Provides power without pedaling. Max range approximately 25 miles.
2. Chế độ hỗ trợ bàn đạp: The motor assists your pedaling effort. Offers an impressive range of up to 60 miles on a single charge.
3. Chế độ tăng cường: Provides extra power for climbing hills or accelerating.
4. Chế độ hành trình: Maintains a steady speed without continuous throttle input.
5. Regular Bike Mode: Ride as a traditional bicycle with no motor assistance, utilizing the Shimano 7-speed gearing system.

6.3. Battery Usage and Charging

The bike is equipped with a 48V 15Ah high-capacity removable lithium battery. It is UL2849 certified for safety.

• Sạc: Connect the charger to the bike's charging port or directly to the removed battery. A full charge typically takes 5-6 hours.
• Tháo pin: The battery is designed to be removable for convenient charging or storage.

6.4. Hệ thống phanh

The E01 features front and rear mechanical disc brakes for powerful and stable stopping power. Always apply both brakes simultaneously for effective and safe braking.

6.5. Lighting and Horn

High-brightness front lights and a horn are integrated for enhanced safety during nighttime riding and to alert others.

7. Bảo trì

7.1. Kiểm tra thường xuyên

• Lốp xe: Regularly check tire pressure and inspect for wear or damage. Maintain recommended pressure for optimal performance and safety.
• Phanh: Periodically inspect brake pads for wear and ensure brake levers provide firm and responsive braking. Adjust or replace components as needed.
• Chốt: Ensure all screws, bolts, and quick-release mechanisms are securely tightened before each ride.
• Xích: Keep the chain clean and lubricated for smooth operation and to prevent premature wear.
• Khung: Inspect the aluminum alloy frame for any signs of damage or cracks.

7.2. Chăm sóc pin

• Hãy sạc đầy pin sau mỗi lần sử dụng, đặc biệt nếu cất giữ trong thời gian dài.
• Tránh làm cạn kiệt hoàn toàn pin.
• Bảo quản pin ở nơi khô ráo, thoáng mát, tránh ánh nắng trực tiếp và nhiệt độ cao.
• If storing the bike for a long time, charge the battery to about 50-70% and check it periodically.

7.3. Vệ sinh

Clean your electric bike regularly with a damp cloth. Avoid using high-pressure washers directly on electrical components. Do not submerge the bike in water.

KHAI THÁC. Xử lý sự cố

This section addresses common issues you might encounter with your EOEOTWO E01 electric bike.

8.1. Reduced Range

If you experience a significantly reduced range, consider the following factors:

• Trọng lượng người lái: Heavier riders consume more battery power.
• Địa hình: Riding uphill or on rough terrain (sand, gravel) uses more energy.
• Tốc độ gió: Riding against strong winds can reduce range.
• Nhiệt độ: Cold weather can temporarily reduce battery performance.
• Riding Habits: Frequent use of high-speed pure electric mode will significantly reduce the range compared to pedal-assist mode.

Giải pháp: Utilize pedal-assist mode more frequently, especially on inclines or against wind, to maximize battery life and range.

8.2. Motor Not Engaging / No Power

• Check if the battery is fully charged and properly seated in its compartment.
• Ensure the power button on the display is pressed and held to turn on the system.
• Kiểm tra tất cả các mối nối cáp xem có bị lỏng hoặc hư hỏng không.

8.3. Các vấn đề về hệ thống phanh

• If brakes feel spongy or ineffective, check brake pad wear and cable tension.
• Ensure disc brake rotors are clean and free from oil or grease.
• If issues persist, professional adjustment or replacement may be required.

8.4. Các vấn đề khác

For any other issues not covered here, please refer to the Warranty and Support section to contact customer service.

9. Mẹo sử dụng

• Maximize Range: To extend your riding range, primarily use the pedal-assist mode. This conserves battery power more effectively than continuous throttle use.
• Kiểm tra trước khi đi xe: Make it a habit to quickly check tire pressure, brake function, and the tightness of all critical bolts before every ride. This simple routine can prevent many potential issues.
• Thích ứng với địa hình: The 26"x4.0 fat tires and front suspension are designed for diverse terrains including city roads, mountains, travel paths, and snow. Adjust your speed and riding style according to the surface conditions.
• Thói quen sạc: Charge your battery regularly, ideally after each significant ride, to maintain battery health and readiness.
• An toàn là trên hết: Always prioritize safety. Wear protective gear and be aware of your surroundings, especially when riding at higher speeds.

10. Bảo hành & Hỗ trợ

10.1. Thông tin bảo hành

The EOEOTWO E01 Electric Bike comes with a 1-year limited warranty. This warranty covers critical components such as the motor, battery, and tires against manufacturing defects for one year from the date of purchase.

10.2. Dịch vụ sau bán hàng

For any questions, concerns, or issues regarding your EOEOTWO E01 electric bike, please contact our customer service. Our professional after-sales customer service team is available 24/7 to assist you.

Where to buy replacement parts? Liên hệ với Dịch vụ khách hàng của chúng tôi.