Kllisre CPU Water Cooling Cooler Instruction Manual

Giới thiệu

The Kllisre CPU Water Cooling Cooler is an All-in-One (AIO) liquid cooling solution designed to efficiently dissipate heat from your CPU, ensuring stable performance and extended lifespan. Featuring vibrant RGB lighting, this cooler enhances the aesthetic appeal of your PC build while providing superior thermal management. It is compatible with a wide range of Intel and AMD CPU sockets, offering versatility for various system configurations.

Thông số kỹ thuật

Nội dung gói

Vui lòng xác minh rằng tất cả các thành phần đều có trong gói của bạn:

• Kllisre AIO Liquid Cooler (Radiator with integrated pump and cold plate)
• RGB Fan(s) (1 for W120, 2 for W240)
• Mounting hardware for Intel sockets (LGA 1150/1151/1155/1200/1366/2011/2011-3/1170/AM5)
• Mounting hardware for AMD sockets (AM2+/AM3/AM4/FM1/FM2/FM2+/Strx4)
• Keo tản nhiệt (đã được bôi sẵn hoặc dạng tuýp)
• Fan screws and radiator screws

Figure 1: Kllisre AIO Cooler Components and Dimensions

Thiết lập và cài đặt

Before beginning installation, ensure your system is powered off and unplugged. Refer to your motherboard manual for specific CPU socket and header locations.

1. Chuẩn bị CPU: Clean any old thermal paste from your CPU and CPU cooler mounting area.
2. Lắp đặt tấm ốp lưng (nếu cần): For Intel sockets, install the appropriate backplate behind the motherboard. AMD sockets typically use the stock backplate.
3. Đính kèm giá đỡ: Secure the correct mounting brackets to the pump/cold plate assembly according to your CPU socket type.
4. Bôi keo tản nhiệt: If thermal paste is not pre-applied to the cold plate, apply a small pea-sized amount to the center of your CPU's Integrated Heat Spreader (IHS).
5. Lắp đặt bơm/tấm làm mát: Carefully place the pump/cold plate assembly onto the CPU, aligning the mounting holes. Secure it with the provided screws, tightening them in a diagonal pattern until snug. Do not overtighten.
6. Lắp quạt vào bộ tản nhiệt: Attach the RGB fan(s) to the radiator using the longer fan screws. Ensure the fan airflow direction is as desired (typically blowing through the radiator).
7. Lắp bộ tản nhiệt: Install the radiator into your PC case in an appropriate location (e.g., front, top, or rear), using the shorter radiator screws. Ensure there is adequate clearance for the tubes and fans.
8. Kết nối cáp:
   • Công suất bơm: Connect the 3-pin pump cable to a dedicated AIO_PUMP or CPU_FAN header on your motherboard. If neither is available, use a SYS_FAN header.
   • Công suất quạt: Connect the 3-pin fan cable(s) to CPU_FAN or SYS_FAN headers on your motherboard. If using multiple fans, you may need a fan splitter (not included) or a fan hub.
   • Đèn RGB: Connect the RGB cable(s) from the fan(s) and pump to a compatible RGB header on your motherboard (e.g., 12V RGB header) or an external RGB controller (if included/purchased separately).

Figure 2: Fan and Pump Electrical Connections

Figure 3: Kllisre 120mm AIO Cooler Overview

Figure 4: Kllisre 240mm AIO Cooler Overview

Hướng dẫn sử dụng

Once installed and all cables are securely connected, power on your computer. The Kllisre AIO cooler will automatically begin circulating coolant and the fans will spin to cool the radiator. The RGB lighting on the fans and pump will illuminate.

• Kiểm soát tốc độ quạt: Fan speeds are typically controlled by your motherboard's BIOS/UEFI settings or through motherboard software. Adjust fan curves to balance cooling performance and noise levels.
• Điều khiển ánh sáng RGB: The RGB lighting is controlled via your motherboard's RGB software (if connected to a compatible header) or through a dedicated RGB controller if one was included or purchased separately. Refer to your motherboard's manual for RGB software details.

BẢO TRÌ

Proper maintenance ensures optimal performance and longevity of your liquid cooler.

• Vệ sinh bụi: Periodically (e.g., every 3-6 months), use compressed air to clean dust from the radiator fins and fan blades. Ensure the fans are not spinning while cleaning to prevent damage.
• Kiểm tra ống: Occasionally check the tubing for any signs of kinks, cracks, or leaks. While AIO coolers are sealed systems, visual inspection can help identify potential issues early.
• Keo tản nhiệt: Keo tản nhiệt thường có tuổi thọ vài năm. Nếu bạn nhận thấy nhiệt độ CPU tăng đáng kể, hãy cân nhắc bôi lại keo tản nhiệt mới.

Xử lý sự cố

• Nhiệt độ CPU cao:
  • Ensure the pump and fans are properly connected and spinning.
  • Verify the cold plate is making full contact with the CPU and thermal paste is correctly applied.
  • Kiểm tra xem có bụi bám trên bộ tản nhiệt không.
  • Adjust fan curves in BIOS/UEFI for higher speeds if necessary.
• Tiếng ồn của máy bơm: A slight hum is normal. Excessive gurgling or grinding might indicate air bubbles or a failing pump. Gently tilt your PC case to help dislodge air bubbles.
• Tiếng ồn của quạt: Check for loose fan screws or obstructions. Adjust fan speeds in BIOS/UEFI.
• Đèn RGB không hoạt động:
  • Ensure RGB cables are securely connected to the motherboard header or controller.
  • Verify the RGB header on your motherboard is enabled in BIOS/UEFI.
  • Kiểm tra cài đặt phần mềm RGB của bo mạch chủ.
• Các vấn đề về khả năng tương thích: If the cooler does not fit your socket, double-check the included mounting hardware against your motherboard's specifications. The Kllisre cooler supports a wide range of Intel and AMD sockets as listed in the specifications.

Mẹo sử dụng

• Khả năng tương thích của ổ cắm: This cooler is designed for a broad range of sockets including Intel LGA 115x, 1200, 1366, 2011, 1170, AM5 and AMD AM3, AM4. Always confirm your specific motherboard socket before installation.
• TDP Considerations: While AIO coolers are generally efficient, consider the Thermal Design Power (TDP) of your CPU. For high-end CPUs like Ryzen 7 5700x or Intel i5 12600KF, a 240mm radiator (W240) is generally recommended over a 120mm (W120) for better cooling performance.
• Tùy chỉnh RGB: If your motherboard supports RGB sync technologies (like Aura Sync), connect the cooler's RGB cables to the appropriate header for software control. If not, the cooler may have a default RGB cycle or require a separate controller.
• Thay thế quạt: The fans are standard sizes (120mm). If you wish to replace them with different fans, ensure they are compatible with the radiator and your motherboard's fan headers.
• Keo tản nhiệt: Most Kllisre AIO coolers come with thermal paste pre-applied or included in the package. Ensure it is applied correctly for optimal heat transfer.

Bảo hành và Hỗ trợ

Your Kllisre CPU Water Cooling Cooler comes with the following:

• Chính sách đổi trả trong vòng 7 ngày: Enjoy 7 days to return the product if you encounter any quality problems.
• Bảo hành 1 năm: All products from the seller typically include a 1-year warranty from the store.

For technical support, warranty claims, or any product-related inquiries, please contact the seller directly through the platform where you purchased the product.

Hình 5: Bảo hành và dịch vụview