ENGO CONTROLS chuyên cung cấp các hệ thống điều khiển nhiệt hiện đại, bộ điều nhiệt thông minh và các thiết bị tự động hóa nhà ở được thiết kế để tiết kiệm năng lượng và mang lại sự thoải mái.
ENGO CONTROLS is a manufacturer of advanced heating control solutions and smart home devices. Their product lineup includes wireless and wired thermostats, smart plugs, relays, and solar-powered cameras, all designed to integrate seamlessly into modern homes.
Leveraging ZigBee 3.0 and Wi-Fi technologies, ENGO CONTROLS provides users with precise temperature management and remote access via the ENGO Smart mobile application. The brand focuses on energy savings, ease of installation, and reliable performance for underfloor heating, radiator systems, and general electrical control.
Hướng dẫn mới nhất từ manuals+ được tuyển chọn cho thương hiệu này.
Những câu hỏi thường gặp về hướng dẫn sử dụng, đăng ký và hỗ trợ cho thương hiệu này.
To perform a factory reset on most ENGO thermostats, hold down the minus (–) and plus (+) buttons simultaneously until the 'FA' message appears on the display. Then follow the on-screen prompts to confirm the reset.
ENGO devices are controlled via the ENGO Smart app, which is available on Google Play and the Apple App Store. The app is also compatible with the Tuya ecosystem.
Yes, for ZigBee-based devices like the E25 thermostat or smart plugs, an internet gateway (such as the EGATEZB) is required to control them remotely via the mobile app and to enable binding functions.
Yes, many ENGO thermostats support both heating and cooling modes. You can typically switch between modes by holding a specific button combination (e.g., minus and checkmark) for 3 seconds.
Most controllers and thermostats are for indoor use only. However, specific products like the ECAM-SOLAR camera are IP65 rated and designed for outdoor environments.