Llano S850 Wireless HDMI Transmitter and Receiver Instruction Manual

Sản phẩm trênview

The Llano S850 is an upgraded Type-C wireless HDMI transmitter and receiver system designed for seamless audio and video transmission. It supports Ultra 4K decode input and 1080P@60Hz output, offering both traditional transmitter/receiver mode and a receiver-only mirroring mode. This device provides a plug-and-play experience with dual-band 5G+2.4G wireless technology for stable transmission up to 50 meters (165 feet).

Image: The Llano S850 Wireless HDMI Transmitter (TX) and Receiver (RX) units.

Có gì trong hộp

Gói này bao gồm các thành phần sau:

• Transmitter (TX) unit
• Receiver (RX) unit
• Dây HDMI
• Dây sạc USB
• Transmitter Extension Cable

Hướng dẫn thiết lập

The Llano S850 offers two primary connection methods: Transmitter + Receiver mode for traditional wireless HDMI, and Receiver Only mode for direct mirroring from compatible devices.

Method 1: Transmitter + Receiver Mode (Plug & Play)

This mode is ideal for connecting devices like laptops, cameras, or TV set-top boxes to a display.

1. Cấp nguồn cho bộ thu (RX): Connect the USB Charging Cord to the RX unit and plug the other end into a 5V power adapter or a USB port on your monitor/TV.
2. Connect the Receiver (RX) to Display: Use the provided HDMI Cord to connect the RX unit to an HDMI input port on your TV, monitor, or projector.
3. Connect the Transmitter (TX) to Source Device: Plug the TX unit directly into the Type-C port of your laptop, tablet, or smartphone. If your device requires additional power or the port is recessed, use the Transmitter Extension Cable.
4. Kết nối tự động: The TX and RX units will automatically pair. Your source device's screen will be mirrored or extended to the display.
5. Power Requirement Note: If your source device (e.g., computer) cannot adequately power the TX unit, connect the TX unit's Type-C charging port to a 5V/2A power adapter.

Image: Visual guide for Connection Method 1 (Transmitter + Receiver) and Method 2 (Receiver Only).

Image: Detailed steps for setting up the Llano S850 in Transmitter + Receiver mode.

Method 2: Receiver Only Mode (Direct Mirroring)

This mode allows direct screen mirroring from compatible smartphones, tablets, and computers to the display using the RX unit alone.

1. Power and Connect Receiver (RX): Follow steps 1 and 2 from Method 1 to power the RX unit and connect it to your display.
2. Đối với điện thoại Android:
   • Pull down the notification bar on your Android phone.
   • Tap the "Wireless Projection" or "Screen Mirroring" icon.
   • Select "LLANO-S850" from the list of available devices.
3. For Apple Phones (iPhone 15/16/17 Series with Type-C):
   • Tap the floating circle (AssistiveTouch) or swipe down from the top-right corner to open Control Center.
   • Tap "Screen Mirroring".
   • Select "LLANO-S850".
   • Enter the PIN code (e.g., "1538") displayed on your monitor/TV when prompted.
4. For Apple Mac:
   • Click the Control Center icon in the menu bar.
   • Select "Screen Mirroring".
   • Choose "LLANO-S850" from the display options.
   • Enter the PIN code (e.g., "1538") displayed on your monitor/TV when prompted.
5. For Windows 10 (and above) PCs:
   • Nhấn nút Phím Windows + K đồng thời.
   • Select "LLANO-S850" from the list of available wireless displays.

Image: Steps for connecting an Android phone in Receiver Only mode.

Image: Steps for connecting an Apple iPhone in Receiver Only mode.

Image: Steps for connecting an Apple Mac in Receiver Only mode.

Image: Steps for connecting a Windows PC in Receiver Only mode.

Hướng dẫn sử dụng

Chế độ hiển thị

The Llano S850 supports two display modes:

• Chế độ Gương: Sao chép màn hình thiết bị nguồn sang màn hình được kết nối.
• Chế độ mở rộng: Extends your source device's desktop, allowing for a larger workspace. This mode is typically configured through your operating system's display settings.

Image: Illustration of Copy Mode (Mirror) and Extended Mode for multi-display setups.

Pausing/Resuming Casting

In Transmitter + Receiver mode, you can pause or resume casting by pressing the button on the Transmitter (TX) unit. This provides quick control over your display output.

Image: A hand pressing the button on the TX unit for one-click disconnect or reconnect.

Hướng màn hình

To switch between landscape and portrait mode on the display, press the button on the Receiver (RX) unit.

Sạc trong khi sử dụng

The TX unit features a Type-C charging port, allowing you to charge your smartphone, laptop, or other compatible devices while simultaneously using the wireless HDMI function. This eliminates the need for an external power source for your source device during use.

Image: The Llano S850 transmitter connected to a phone, demonstrating simultaneous charging.

BẢO TRÌ

To ensure the longevity and optimal performance of your Llano S850 Wireless HDMI system, follow these maintenance guidelines:

• Vệ sinh: Use a soft, dry cloth to clean the exterior of the transmitter and receiver units. Avoid using liquid cleaners or abrasive materials.
• Kho: Bảo quản thiết bị ở nơi khô ráo, thoáng mát, tránh ánh nắng trực tiếp và nhiệt độ cao khi không sử dụng.
• Xử lý: Hãy cẩn thận khi sử dụng để tránh hư hỏng. Tránh làm rơi hoặc để sản phẩm chịu tác động mạnh.
• Thông gió: Đảm bảo thông gió tốt xung quanh các thiết bị trong quá trình hoạt động để tránh quá nhiệt.

Xử lý sự cố

If you encounter issues with your Llano S850, refer to the following common problems and solutions:

• No Signal/No Video Output:
  • Ensure both the Transmitter (TX) and Receiver (RX) units are properly powered. The RX unit requires external power via the USB charging cord.
  • Verify that the HDMI cable is securely connected between the RX unit and the display.
  • Confirm the display is set to the correct HDMI input source.
  • If using the TX unit, ensure it is firmly connected to your source device's Type-C port. If the device's port is recessed or a protective case is used, the connection might be loose. Try using the Transmitter Extension Cable if available, or remove the case.
  • If your source device cannot power the TX unit sufficiently, connect a 5V/2A power adapter to the TX unit's Type-C charging port.
• Audio Works, No Video:
  • Check the display's input settings to ensure it's receiving both audio and video from the HDMI source.
  • Hãy thử dùng một loại cáp HDMI khác.
  • Khởi động lại cả thiết bị nguồn và màn hình.
• Device Gets Hot During Use:
  • It is normal for electronic devices to generate some heat during operation. However, if the device becomes excessively hot, ensure it has adequate ventilation and is not covered.
  • If overheating persists or causes performance issues, discontinue use and contact customer support.
• Cannot Connect in Receiver Only Mode (e.g., Android Phone):
  • Ensure your device supports wireless projection or screen mirroring (e.g., Miracast for Android, AirPlay for Apple).
  • Some Android phones may require specific settings or apps for wireless display. Refer to your phone's manual.
  • Ensure the RX unit is powered on and visible in your device's wireless display settings.
• Short Transmission Distance or Unstable Signal:
  • Wireless transmission distance can be affected by walls, obstacles, and other wireless interference. Try to minimize obstructions between the TX and RX units.
  • Ensure both units are within the recommended operating range (up to 50 meters/165 feet in open areas).
  • Avoid placing the units near other strong wireless signals or electronic devices that may cause interference.

Thông số kỹ thuật

Bảo hành và Hỗ trợ

Llano provides comprehensive support for its products:

• Phạm vi bảo hành: Được bảo hành 2 năm kể từ ngày mua.
• Trả về: 30-day hassle-free returns.
• Thay thế: Free replacement for 15 days, and quality issue replacement for up to 18 months.
• Hỗ trợ khách hàng: 24/7 specialist support is available for any inquiries or assistance.

Image: Llano's commitment to customer support and warranty.

Video sản phẩm chính thức