1. Giới thiệu
The FTVOGUE Water Level Controller is an automatic liquid level management device designed for various applications, including water tanks and pump systems. It monitors liquid levels and activates or deactivates a water pump to maintain desired levels. This controller features adjustable sensitivity and is constructed from durable ABS material for reliable performance.
2. Thông tin an toàn
- Hãy đảm bảo ngắt nguồn điện trước khi lắp đặt hoặc bảo trì để tránh bị điện giật.
- Installation should be performed by qualified personnel or under professional supervision.
- Do not expose the controller to extreme temperatures or corrosive environments beyond its specified operating range.
- Verify all wiring connections are secure and correct according to the provided diagram to avoid damage to the unit or connected equipment.
- This device is designed for liquid level control. Do not use it for purposes other than its intended function.
3. Tính năng sản phẩm
- Kiểm soát tự động: Monitors liquid levels and activates the water pump to maintain the optimal level.
- Độ nhạy có thể điều chỉnh: Customize sensitivity settings for precise level detection.
- Kết cấu bền bỉ: Made from ABS material for long-lasting performance.
- Khả năng tương thích rộng: Suitable for various applications including oil tanks and water storage.
- Cài đặt dễ dàng: Quick setup with options for screw positioning or electric box track mounting.
4. Nội dung gói hàng
Vui lòng kiểm tra nội dung gói hàng khi nhận được:
- 1 x FTVOGUE Water Level Controller
- 1 x Small Screwdriver (for sensitivity adjustment)
Image: The FTVOGUE Water Level Controller shown with a small screwdriver, which is included for adjustments.
5. Thông số kỹ thuật
| Loại mặt hàng | Bộ điều khiển mực nước |
| Vật liệu | ABS |
| Đầu vào Voltage | AC100V-260V, 50 / 60Hz |
| Dòng điện làm việc | Working current ≤ 110mA, static current consumption ≤ 20mA |
| Load Power (Resistive) | < 1.6KW (Note: Overload or three-phase load requires additional AC contactor) |
| Load Power (Inductive) | < 1KW (Note: Overload or three-phase load requires additional AC contactor. Inductive load refers to loads with inductive coils, such as motors, electromagnets, solenoid valves, etc.) |
| Đầu ra báo động | 800W (resistive load) normally open, normally closed output |
| Chế độ đầu ra | Normally open, normally closed output |
| Tín hiệu đầu vào | Induction signal input |
| Sensing Head Interface Voltage | DC12V |
| Nhiệt độ làm việc | -20 đến 105 ℃ |
| Kích thước tổng thể | Kích thước xấp xỉ 115 x 90 x 40mm / 4.53 x 3.54 x 1.57in |
| Số hiệu mẫu | FTVOGUElin8szu9v5 |
| Nước xuất xứ | Trung Quốc |
6. Thiết lập và Cài đặt
The FTVOGUE Water Level Controller offers flexible installation options, including screw positioning or mounting on an electric box track. Proper wiring is crucial for correct operation.
6.1 Sơ đồ đấu dây
Refer to the following diagram for correct wiring connections. Ensure all connections are secure before applying power.
Image: A detailed wiring diagram illustrating connections for the FTVOGUE Water Level Controller with a pump and water tanks. It shows input power (AC 220V), sensor connections (K1, K2, M), and output connections (N.O., N.C., N).
6.2 Lắp đặt
Mount the controller in a dry, protected location using screws or by attaching it to a compatible electric box track. Ensure adequate ventilation around the unit.
6.3 Vị trí cảm biến
Position the liquid level sensors at the desired high and low points within your tank or reservoir. Ensure sensors are securely fixed and free from obstructions that might interfere with accurate level detection.
7. Hướng dẫn vận hành
Once installed and wired correctly, the controller will automatically monitor liquid levels and operate the connected pump as configured.
7.1 Automatic Level Control
The controller will activate the pump when the liquid level drops below the lower sensor and deactivate it when the level reaches the upper sensor, maintaining the liquid within the set range.
7.2 Điều chỉnh độ nhạy
The sensitivity of the controller can be adjusted to suit different liquid types or environmental conditions. Use the provided small screwdriver for this adjustment.
Hình ảnh: Cận cảnh view of the FTVOGUE Water Level Controller with instructions on how to adjust sensitivity. To adjust, remove the plastic cover, locate the small screw, turn clockwise to reduce sensitivity, and counterclockwise to increase sensitivity.
- Remove the plastic cover of the controller.
- Locate the very small screw inside the unit.
- Vặn vít theo chiều kim đồng hồ để giảm bớt độ nhạy.
- Turn the screw counterclockwise to tăng độ nhạy.
8. Bảo trì
- Regularly inspect the controller and sensors for any signs of damage or wear.
- Keep the controller unit clean and free from dust and moisture.
- Thường xuyên kiểm tra tất cả các mối nối dây điện để đảm bảo chúng vẫn chắc chắn và an toàn.
- Clean the liquid level sensors as needed to prevent buildup that could affect accuracy.
KHAI THÁC. Xử lý sự cố
- Bộ điều khiển không bật nguồn: Kiểm tra âm lượng đầu vàotage supply and ensure all power connections are correct and secure.
- Pump not activating/deactivating: Verify sensor placement and cleanliness. Check wiring to the pump and ensure the load power specifications are not exceeded. Adjust sensitivity if necessary.
- Inaccurate level detection: Clean the sensors thoroughly. Ensure sensors are not obstructed and are placed correctly at the desired levels. Adjust sensitivity.
- Overload issues: If using an inductive load (motor, solenoid valve) or a three-phase load, ensure an additional AC contactor is used as specified in the specifications.
10. Bảo hành và Hỗ trợ
Để biết thông tin bảo hành hoặc hỗ trợ kỹ thuật, vui lòng xem bao bì sản phẩm hoặc liên hệ với nhà bán lẻ. Vui lòng giữ lại hóa đơn mua hàng làm bằng chứng mua hàng.