Giới thiệu
This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your BWT ES800 Robotic Pool Cleaner. Please read this manual thoroughly before using the appliance and retain it for future reference.
Thông tin an toàn
Luôn tuân thủ các biện pháp phòng ngừa an toàn sau:
- Đảm bảo nguồn điện đã được ngắt trước khi thực hiện bất kỳ bảo trì hoặc vệ sinh nào.
- Không vận hành máy hút bụi nếu dây nguồn bị hỏng. Hãy liên hệ với nhân viên kỹ thuật có chuyên môn để sửa chữa.
- Hãy giữ trẻ em và vật nuôi tránh xa khu vực hồ bơi trong khi máy vệ sinh đang hoạt động.
- Only use the cleaner in pools with appropriate water chemistry levels.
- Do not use the cleaner to remove large debris such as leaves, twigs, or rocks, as this may damage the unit.
- Always remove the cleaner from the pool after each cleaning cycle.
Nội dung gói
Xác minh rằng tất cả các thành phần đều có trong gói:
- BWT ES800 Robotic Pool Cleaner Unit
- Bộ nguồn
- Floating Cable (59ft)
- Giỏ lọc
- Hướng dẫn sử dụng (tài liệu này)
Cài đặt
1. Tháo dỡ và kiểm tra ban đầu
Carefully remove all components from the packaging. Inspect the cleaner and its accessories for any signs of damage. If any damage is found, do not operate the unit and contact customer support.
2. Kết nối nguồn điện
- Place the power supply unit at least 3.5 meters (11.5 feet) from the edge of the pool. Ensure it is in a shaded area and protected from direct sunlight and splashing water.
- Connect the floating cable from the cleaner to the power supply unit. Ensure a secure connection.
- Cắm bộ nguồn vào ổ cắm điện có nối đất.
3. Placing the Cleaner in the Pool
Gently lower the BWT ES800 into the pool. Allow it to sink to the bottom. Ensure that all air trapped inside the cleaner is released by gently rocking it from side to side until no more bubbles emerge. Spread the floating cable evenly across the pool surface to prevent tangling.
Image: The BWT ES800 Robotic Pool Cleaner submerged in a pool, ready for operation.
4. App Control Setup (BWT Best Water App)
The BWT ES800 features Bluetooth connectivity for app control. Download the "BWT Best Water App" from the Apple App Store or Google Play Store. Follow the in-app instructions to pair your device with the cleaner. This allows for remote control, cycle selection, and software updates.
Image: The BWT ES800 cleaner next to a smartphone displaying the BWT Best Water App interface for remote control.
Hoạt động
1. Bắt đầu chu trình vệ sinh
Once the cleaner is submerged and powered on, you can initiate a cleaning cycle using the button on the unit or through the BWT Best Water App.
2. Cleaning Modes and Cycles
The BWT ES800 offers multiple cleaning modes and cycles to suit your pool's needs:
- Chế độ vệ sinh:
- Floor: Focuses cleaning on the pool floor.
- Wall & Waterline: Cleans the pool walls and waterline.
- Overall: Provides comprehensive cleaning of the entire pool (floor, walls, and waterline).
- Cleaning Cycles: Selectable durations of 1.5 hours, 2 hours, or 2.5 hours.
The cleaner utilizes a smart navigation system with an integrated gyroscope to adapt its driving pattern to your pool's shape, ensuring complete coverage and avoiding cable tangles.
Image: The BWT ES800 cleaner ascending a pool wall, demonstrating its smart cable control and anti-entanglement system.
Image: The BWT ES800 efficiently cleaning the bottom, walls, and waterline of a pool.
Video: Một kết thúcview of the BWT ES800 Robotic Pool Cleaner's features, including its compact design, PVC brush, powerful suction, high-performance filter, and smart cable control with multiple cleaning modes and cycles.
BẢO TRÌ
1. Vệ sinh giỏ lọc
After each cleaning cycle, it is essential to clean the filter basket to maintain optimal performance. The ES800 features an easy-to-access filter basket.
- Lấy chất tẩy rửa ra khỏi hồ bơi bằng cách sử dụng tay cầm.
- Mở nắp trên của máy hút bụi.
- Lift out the filter basket.
- Rinse the filter basket thoroughly with a garden hose to remove all debris.
- Reinsert the clean filter basket and close the cover securely.
Image: A hand lifting the filter basket from the BWT ES800, illustrating the "Lift & Rinse" ease of use.
2. Bảo dưỡng bàn chải
Periodically inspect the PVC brushes for wear or damage. If the brushes are worn, they may need replacement to ensure effective cleaning. Contact customer support for replacement parts.
Hình ảnh: Một chi tiết view of the BWT ES800's PVC brush, designed for effective scrubbing.
3. Quản lý cáp
After each use, coil the floating cable neatly to prevent kinks and tangles, which can affect the cleaner's movement and longevity.
4. Lưu trữ
When not in use, store the BWT ES800 in a cool, dry, and shaded area, away from direct sunlight and extreme temperatures. Ensure the cleaner and its power supply are completely dry before storage.
Xử lý sự cố
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Máy hút bụi không khởi động. | No power, loose connection, power supply fault. | Check power outlet, ensure all cables are securely connected. Verify power supply unit is functioning. |
| Máy dọn dẹp di chuyển chậm hoặc không đều. | Clogged filter, tangled cable, debris in brushes/tracks. | Clean filter basket. Untangle cable. Remove debris from brushes and tracks. |
| Cleaner does not clean walls effectively. | Worn brushes, air trapped in unit, incorrect cleaning mode. | Inspect and replace brushes if worn. Ensure all air is expelled from the unit. Select "Wall & Waterline" or "Overall" cleaning mode. |
| Sự cố kết nối ứng dụng. | Bluetooth range, app not updated, pairing issue. | Ensure device is within Bluetooth range. Update the BWT Best Water App. Re-pair the device with the cleaner. |
Thông số kỹ thuật
| Tính năng | Chi tiết |
|---|---|
| Người mẫu | ES800 |
| Kích thước sản phẩm (D x R x C) | 15" x 14.6" x 9" (38.1 cm x 37.1 cm x 22.9 cm) |
| Cân nặng | Dưới 13 lbs (5.9 kg) |
| Chiều dài cáp | 59 feet (18 mét) |
| Chu kỳ vệ sinh | 1.5 giờ, 2 giờ, 2.5 giờ |
| Sức hút | 4,000 GPH (15 m³/h) |
| Độ mịn của bộ lọc | 100 µm |
| Loại hồ bơi | In-ground pools up to 49 ft (15 m) in length |
| khu vực làm sạch | Sàn nhà, Tường, Đường nước |
| Điều khiển | On-unit button, BWT Best Water App (Bluetooth) |
| Hệ thống dẫn đường | Smart Navigation with integrated gyroscope, Gen Core 7 |
| Loại cọ | Nhựa PVC |
| Nguồn điện | AC |
| Mã số UPC | 810045773032 |
Image: The BWT ES800 Robotic Pool Cleaner highlighting its key features and specifications.
Image: Internal components of the BWT ES800, showing the propeller motor, left motor, and right motor, emphasizing their efficiency and durability.
Bảo hành
The BWT ES800 Robotic Pool Cleaner is backed by a Bảo hành 3 năm. This warranty covers manufacturing defects and ensures high-quality build and long-lasting performance. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official BWT webtrang web hoặc liên hệ với bộ phận hỗ trợ khách hàng.
Hỗ trợ khách hàng
For further assistance, technical support, or to inquire about replacement parts, please contact BWT customer service. You can find contact information on the official BWT website or through the BWT Best Water App.
Tài nguyên trực tuyến: Ghé thăm BWT Store on Amazon để biết thông tin sản phẩm và hỗ trợ.