Luqeeg Signal Generator Instruction Manual

Giới thiệu

The Luqeeg Signal Generator is a versatile device designed for generating DC voltage and current outputs, as well as PWM pulse square waves. It also features input measurement capabilities, making it suitable for a wide range of applications including PLC controller testing, LED calibration, and general electronic circuit analysis. This manual provides detailed instructions for the proper setup, operation, and maintenance of your signal generator.

1. Thiết lập và sử dụng ban đầu

1.1 Tháo dỡ

Cẩn thận lấy tất cả các thành phần ra khỏi bao bì. Bao bì sẽ bao gồm:

• 1 x Signal Generator
• 4 x Clip
• 1 x Cáp USB
• 1 x Hướng dẫn sử dụng (tài liệu này)

Hình 1.1: Included alligator clips for connections.

1.2 thiết bị trênview

Familiarize yourself with the main components of the signal generator:

Hình 1.2: Signal Generator Component Diagram.

1. Pluggable terminal block (3.81-9P)
2. Biểu tượng thiết bị đầu cuối
3. 2 inch TFT color display screen
4. Phím mũi tên xuống
5. Digital encoder adjustment knob (with button, can be pressed)
6. Phím Shift trái
7. Công tắc nguồn
8. Đèn báo sạc
9. Cổng USB

1.3 Tùy chọn nguồn điện

The signal generator offers flexible power supply methods:

• External 24VDC Terminal: Connect a 24VDC power source to the designated terminals.
• USB loại C: Use the provided USB Type-C cable to connect to a power adapter or computer.
• Rechargeable Li Battery: The device supports an internal rechargeable lithium battery (not included). When a battery is installed, it can be charged via USB Type-C or external 24VDC while in use.

Hình 1.3: Multiple power supply methods for the signal generator.

1.4 Sơ đồ kết nối

Refer to the following diagram for proper terminal connections. Terminal numbers are read from left to right (1-9).

Hình 1.4: Terminal Connection Diagram.

• GND (1): Power supply negative (input). This is the same as 9-GND and can be arbitrarily connected.
• 24V (2): Power supply positive (input). External power input to power or charge the meter.
• mA i (3): Current signal input positive.
• Vi (4): Tậptage signal input positive.
• LP+ (5): EXT 24V input (passive mode).
• mA o (6): Current signal output positive. The current output is commonly used in active mode. The output of the meter 6-mAo 9-GND corresponds to positive and negative current input of the PLC.
• Vo (7): Tậptage signal output positive. The voltage đầu ra 7-Vo 9-GND corresponds to the positive and negative voltage input of the PLC, or it can be measured directly with a multimeter.
• PWM (8): PWM output positive.
• GND (9): Signal common ground (internal connect to ①-GND).

Current Sink Two-Wire Output: Kết nối 24V + đến 5-LP+ terminal of the meter head, and output from the 6-mAo terminal to control the current of the external 24V. The meter head is equivalent to a variable resistor, so it is called passive mode. Direct measurement cannot detect the current, and it can be directly replaced with a passive two-wire pressure/temperature sensor, etc.

2. Hướng dẫn vận hành

2.1 Giao diện người dùng và hiển thị

The device features a 2.0-inch TFT color screen (320x240) that displays all values clearly on one screen. It supports both Chinese and English interface switching. The large digital encoder knob allows for easy and precise adjustments.

Hình 2.1: TFT Color Screen Display.

Hình 2.2: Digital Encoder Adjustment Knob.

2.2 Dòng điện một chiềutage và Sản lượng hiện tại

• Tậptage DC Analog Output Range: ±12V (with short circuit protection).
• Current DC Analog Output Range: 0-24mA (short circuit protected).
• Điều chỉnh đầu ra: Users can freely set the output range, such as 0-20mA, 4-20mA, 0-10V, 0-5V, etc. The corresponding engineering display values can also be set.

2.3 PWM Pulse Square Wave Output

• Adjustable Frequency: 1-150kHz.
• Adjustable Duty Cycle: 0-100%.
• Cấp độ cao: 5V.
• Ứng dụng: PWM pulse output high level is 5V, low level is 0V. It can directly drive buzzers, LEDs, optocouplers, etc., or connect to 12V/24V systems through external level conversion modules.

Hình 2.3: Signal generator connected and operating.

2.4 Input Measurement

• Tậptage Phạm vi đo: ±50V.
• Phạm vi đo hiện tại: ±50mA.

3. Bảo trì

To ensure the longevity and optimal performance of your Luqeeg Signal Generator, follow these maintenance guidelines:

• Vệ sinh: Hãy dùng khăn mềm, khô để lau sạch thiết bị. Tránh sử dụng chất tẩy rửa có tính mài mòn hoặc dung môi, vì chúng có thể làm hỏng thiết bị.asing hoặc màn hình.
• Kho: Bảo quản thiết bị ở nơi khô ráo, thoáng mát, tránh ánh nắng trực tiếp, nhiệt độ quá cao hoặc quá thấp và độ ẩm cao.
• Xử lý: Handle the device with care to prevent physical damage. Avoid dropping it or exposing it to strong impacts.
• Battery Care (if installed): If using a rechargeable Li battery, ensure it is charged regularly, even if not in frequent use, to maintain battery health. Do not expose the battery to extreme heat or puncture it.
• Phim bảo vệ: The surface protective film of the sticker can be peeled off for clearer viewđang.

KHAI THÁC. Xử lý sự cố

This section addresses common issues you might encounter with your signal generator.

• Thiết bị không bật nguồn:
  • Kiểm tra xem công tắc nguồn có đang ở vị trí "BẬT" hay không.
  • Ensure the USB Type-C cable is securely connected and the power source is active.
  • If using external 24VDC, verify the power supply is connected correctly to the terminals and is providing the correct voltage.
  • If using a rechargeable battery, ensure it is charged.
• Không có tín hiệu đầu ra:
  • Verify that the output parameters (voltage, current, PWM frequency, duty cycle) are set correctly on the display.
  • Check all connections to the output terminals for proper contact.
  • Ensure the device is powered on and functioning.
• Kết quả đo đầu ra không chính xác:
  • Confirm that the measurement range is appropriate for the signal being measured.
  • Check the calibration settings if custom ranges have been configured.
  • Đảm bảo tất cả các kết nối đều an toàn và không bị nhiễu.
• PWM Output Compatibility:

  Ghi chú: The PWM output of this device is not suitable for 12V or 2V systems, as 5V is regarded as a low level in these systems. For such applications, an external level conversion module is required.

5. Thông số kỹ thuật

6. Thông tin bảo hành

Luqeeg products are manufactured to high quality standards. This product is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or contact Luqeeg customer support for specific warranty terms and conditions. Keep your purchase receipt as proof of purchase for warranty claims.

7. Hỗ trợ khách hàng

For technical assistance, troubleshooting, or any questions regarding your Luqeeg Signal Generator, please visit the official Luqeeg store or contact their customer support. You can find more information and contact details at the Luqeeg Store on Amazon.