CaDA C55024W BWT Alpine F1 Team A525 Building Blocks Car Instruction Manual

1. Giới thiệu

This manual provides essential information for the assembly, care, and understanding of your CaDA C55024W BWT Alpine F1 Team A525 Building Blocks Car. This 1:24 scale model accurately recreates the Alpine A525 Formula 1 race car, offering a detailed building experience for enthusiasts.

Image 1.1: The CaDA C55024W BWT Alpine F1 Team A525 Building Blocks Car model.

2. Thông tin an toàn

CẢNH BÁO: NGUY CƠ NGHẸN - Có bộ phận nhỏ. Không dành cho trẻ em dưới 3 tuổi.

Please ensure all small parts are kept away from young children to prevent choking. Adult supervision is recommended during assembly, especially for younger builders.

3. Nội dung gói hàng

Upon opening the package, verify that all components are present. The box should contain:

• CaDA C55024W BWT Alpine F1 Team A525 Building Blocks Car components (approximately 300 pieces)
• Hướng dẫn sử dụng
• Official licensed display nameplate

Image 3.1: Product packaging and included model components.

4. Hướng dẫn lắp ráp

Assembly of the CaDA C55024W model requires careful attention to the included detailed instructions. Follow the step-by-step guide provided in the separate instruction manual to construct the race car model.

4.1. Mẹo lắp ráp chung

• Organize pieces by color and type before starting.
• Refer to the visual diagrams in the instruction manual for each step.
• Đảm bảo các bộ phận được kết nối chắc chắn để duy trì tính toàn vẹn của cấu trúc.

Hình ảnh 4.1: Ví dụample of assembling the building blocks model.

4.2. Tính năng chi tiết

The model features a realistic front wing, steering wheel, halo, cockpit, roll hoop, and rear wing. High-definition printed graphics replicate multiple sponsor logos. Special molded elements and racing slick tires enhance realism.

Image 4.2: Close-up details of the model's components, including tires, cockpit, and wings.

4.3. Driver Liveries

The kit includes components to build two official race liveries: No.10 (Pierre Gasly) and No.43 (Franco Colapinto), allowing for customization of your display.

Image 4.3: Comparison of the two available driver livery options.

5. Hướng dẫn vận hành

This building block model is designed for display and collection. Once assembled, it can be placed on a desk, shelf, or integrated into a Formula 1 model collection using the provided licensed display nameplate.

The model is a static display piece and does not feature remote control or motorized functions.

6. Bảo trì

To maintain the appearance and integrity of your CaDA building blocks model:

• Vệ sinh: Gently dust the model with a soft, dry cloth or a soft brush. Avoid using harsh chemicals or abrasive materials.
• Kho: Bảo quản mô hình ở nơi khô ráo, thoáng mát, tránh ánh nắng trực tiếp để tránh bị đổi màu hoặc vật liệu bị phân hủy.
• Xử lý: Handle the model carefully to avoid accidental detachment of parts.

KHAI THÁC. Xử lý sự cố

Should you encounter any issues during assembly or with the product, consider the following:

• Những mảnh ghép còn thiếu: Double-check the packaging and surrounding area for any small, overlooked parts. If pieces are genuinely missing, contact CaDA customer support.
• Khó khăn khi lắp ráp: Re-examine the instruction manual for the specific step. Ensure all pieces are oriented correctly and fully pressed into place.
• Kết nối lỏng lẻo: If parts feel loose, ensure they are connected to the correct studs and fully seated.

8. Thông số kỹ thuật

Image 8.1: Model dimensions: 22.5cm length, 8.5cm width, 5.0cm height.

Image 8.2: Visual representation of the 1:24 scale of the model.

9. Bảo hành và Hỗ trợ

For warranty information or customer support regarding your CaDA C55024W BWT Alpine F1 Team A525 Building Blocks Car, please refer to the contact details provided in the product packaging or visit the official CaDA webđịa điểm.

Nhà sản xuất: Thâm Quyến Saounidi Dianzikeji Youxiangongsi