1. Sản phẩm hếtview
The Generic WiFi Solar Tank Level Monitor provides a reliable solution for tracking liquid levels in various tanks. This system includes a solar-powered sensor for outdoor installation and an indoor repeater for enhanced signal transmission. It connects to a mobile application for remote monitoring and delivers real-time alerts to prevent issues such as water outages or overflows.
Hình ảnh 1.1: The WiFi Solar Tank Level Monitor system, illustrating its remote monitoring capabilities through the GeniLife app and compatibility with 2.4G/5G WiFi. The image also indicates a required drill hole size of 2 1/2 inches for sensor installation on a tank.
2. Hướng dẫn cài đặt
2.1 Cài đặt cảm biến
- Chuẩn bị bể chứa: Identify a suitable location on your tank for the sensor. Ensure the surface is clean and flat.
- Lỗ khoan: Using appropriate tools, drill a 2 1/2 inch (approximately 63.5 mm) diameter hole at the chosen installation point on the tank.
- Cảm biến gắn kết: Insert the solar-powered liquid level monitor into the drilled hole. Secure it firmly using the provided mounting hardware, ensuring a watertight seal.
2.2 Repeater Placement
Place the repeater (signal booster) indoors, within 330 feet (100 meters) of the outdoor sensor. Ensure it is in an area with good WiFi coverage (2.4G/5G) and away from major obstructions that could interfere with the signal.
2.3 Kết nối ứng dụng
- Tải ứng dụng: Download the GeniLife APP from your smartphone's app store.
- Tạo tài khoản: Hãy làm theo hướng dẫn trong ứng dụng để tạo tài khoản người dùng mới hoặc đăng nhập nếu bạn đã có tài khoản.
- Ghép nối thiết bị: Within the app, select the option to add a new device. Follow the pairing instructions, which typically involve pressing a button on the repeater and confirming the connection in the app. Ensure your smartphone is connected to the same 2.4G/5G WiFi network as the repeater during setup.
Hình ảnh 2.1: Examples of various liquid containers, including water barrels and large tanks, that are compatible with the non-contact ultrasonic level sensor. The image also highlights the solar panel and sensor components.
3. Hướng dẫn vận hành
3.1 Giám sát từ xa
- Theo dõi thời gian thực: Once connected, open the GeniLife APP on your smartphone or tablet to view the current liquid level in your tank. The app provides real-time data and historical tracking.
- Truy cập mọi lúc, mọi nơi: Monitor your tank levels from any location with an internet connection.
3.2 Thông báo cảnh báo
- Thông báo ứng dụng: The GeniLife APP will send instant notifications to your device if the liquid level goes too high or too low, based on your configured thresholds.
- Repeater Alerts: The indoor repeater also provides audible and visual alerts for critical level changes, ensuring you are informed even if your phone is not nearby.
Hình ảnh 3.1: The repeater device, showing its alert indicator, alongside a smartphone displaying synchronized alert notifications from the GeniLife app, highlighting the system's instant alert capabilities.
3.3 Truyền tín hiệu
- Phạm vi mở rộng: The upgraded repeater ensures a stable signal transmission range of up to 330 feet (100 meters) between the outdoor sensor and your indoor WiFi network.
- Kết nối liền mạch: This extended range helps maintain a strong connection, minimizing disconnections and ensuring continuous monitoring.
Hình ảnh 3.2: An outdoor tank equipped with the sensor, and an indoor repeater demonstrating seamless WiFi connectivity. The image emphasizes the increased transmission distance of up to 330 feet, ensuring a strong signal without disconnections.
4. Bảo trì
4.1 Quản lý nguồn điện
- Sạc năng lượng mặt trời: The outdoor sensor is equipped with a 5V solar panel that continuously charges its internal 1500mAh lithium battery.
- Tuổi thọ pin dài: The sensor is designed for low power consumption, providing up to 6 months of stable performance even during extended periods of cloudy or rainy weather.
- Bảo trì thấp: Due to its solar charging capability, the sensor requires minimal manual intervention for power.
4.2 Độ bền và khả năng bảo vệ
- Khả năng chống chịu thời tiết: The sensor features a sturdy ABS shell and a sealed base, providing IP65 waterproof protection against wind, rain, and sun exposure.
- Vệ sinh: Periodically inspect the solar panel for any dirt or debris and gently clean it to ensure optimal charging efficiency.
Hình ảnh 4.1: The solar-powered tank level monitor, emphasizing its low maintenance and high reliability. It highlights a stable battery life of 6 months and its ability to function effectively even during stormy weather conditions.
KHAI THÁC. Xử lý sự cố
- No Signal/Weak Connection:
- Ensure the repeater is placed within 330 feet (100 meters) of the sensor.
- Check for physical obstructions between the sensor and repeater.
- Verify the repeater is powered on and its WiFi indicator light is active.
- App Not Receiving Alerts:
- Confirm your smartphone has an active internet connection.
- Check app notification settings on your phone and within the GeniLife APP.
- Ensure the sensor and repeater are properly paired and communicating.
- Đọc không chính xác:
- Verify the sensor is installed correctly and securely on the tank.
- Ensure the sensor's ultrasonic path is clear of any obstructions inside the tank.
- Confirm the tank type and liquid are within the sensor's specified operating range (1 to 13 ft).
- Cảnh báo pin yếu:
- Ensure the solar panel on the sensor is clean and exposed to sufficient sunlight.
- During prolonged cloudy periods, the battery may take longer to recharge.
6. Thông số kỹ thuật
| Tính năng | Đặc điểm kỹ thuật |
|---|---|
| Người mẫu | B0FHTQQ5RP |
| Thương hiệu | Chung chung |
| Màu sắc | Xám |
| Nguồn điện | Solar Powered (5V solar panel, 1500mAh lithium battery) |
| Tuổi thọ pin | Up to 6 months (on full charge, even during continuous rainy days) |
| Thiết bị tương thích | Smartphone, Tablet (via GeniLife APP) |
| Kết nối | WiFi 2.4G / 5G |
| Phạm vi tín hiệu | Up to 330 ft (100 meters) with repeater |
| Loại đo lường | Non-contact ultrasonic |
| Phạm vi đo lường | 1 to 13 ft (liquid height) |
| Xếp hạng chống thấm nước | IP65 |
| Kích thước sản phẩm (Cảm biến) | Approx. 2"L x 1"W x 1"H (main body, excluding threads) |
| Product Dimensions (Repeater) | Approx. 3.4"L x 2.5"W (as per image) |
| Kích thước lỗ khoan | 2 1/2 inch (63.5 mm) |
Hình ảnh 6.1: Detailed dimensions for both the repeater (signal booster) and the solar-powered liquid level monitor, including the recommended drill hole size for installation.
7. Bảo hành và Hỗ trợ
For specific warranty information and technical support, please refer to the documentation included with your purchase or contact the seller directly. Warranty terms may vary depending on the region and retailer.