Giới thiệu
This manual provides instructions for the assembly, operation, maintenance, and troubleshooting of your Tribesigns 24-inch Modern Side Table. Please read these instructions carefully before assembly and use to ensure safe and correct operation.
The Tribesigns Modern Side Table features a 2-tier design with a trapezoid base, suitable for various indoor settings such as living rooms and bedrooms. It is constructed from engineered wood with a natural wood color finish.
Thông tin an toàn
- Luôn luôn làm theo hướng dẫn lắp ráp một cách cẩn thận.
- Đảm bảo tất cả ốc vít và chốt được siết chặt trước khi sử dụng. Kiểm tra định kỳ và siết chặt lại nếu cần.
- Do not exceed the maximum weight recommendation of 200 pounds (90.7 kg) for the table.
- Đặt bàn trên bề mặt phẳng, ổn định để tránh bị lật.
- Để xa tầm tay trẻ em trong quá trình lắp ráp các bộ phận nhỏ để tránh nguy cơ nghẹt thở.
- Sản phẩm này chỉ được thiết kế để sử dụng trong nhà.
- Utilize the provided anti-fall parts to secure the table if required, especially in homes with children or pets, to ensure tip-free stability.
Nội dung gói
Before beginning assembly, verify that all components listed in the included assembly guide are present and undamaged. The package typically includes:
- Tấm mặt bàn
- Base Panels (Trapezoid structure)
- Tấm kệ dưới
- Hardware Pack (screws, dowels, connectors)
- Tấm lót chống trượt
- Anti-fall Parts (wall anchor kit)
- Hướng dẫn lắp ráp
Figure 1: Tabletop Panel with Dimensions.
Figure 2: Trapezoidal Base and Lower Storage Area.
Thiết lập và lắp ráp
Assembly typically requires two people and a screwdriver. Refer to the detailed assembly guide included in your package for specific step-by-step instructions and diagrams.
- Giải nén các thành phần: Cẩn thận lấy tất cả các bộ phận ra khỏi bao bì và đặt chúng lên bề mặt sạch, mềm để tránh trầy xước.
- Xác định các bộ phận: Hãy ghép từng bộ phận với các nhãn tương ứng trong hướng dẫn lắp ráp.
- Lắp ráp cấu trúc cơ bản: Follow the guide to connect the trapezoidal base panels using the provided hardware.
- Gắn kệ dưới: Secure the lower shelf panel within the trapezoidal base.
- Đính kèm mặt bàn: Fasten the tabletop panel to the assembled base structure.
- Install Non-slip Pads: Apply the non-slip pads to the bottom of the base to protect floors and prevent sliding.
- Install Anti-fall Parts (Optional but Recommended): If desired, attach the anti-fall parts to the table and secure it to a wall according to the instructions to enhance stability.
Figure 3: Non-slip Pads Installation.
Figure 4: Anti-fall Parts for Wall Securing.
Video 1: Quá trình lắp ráp kết thúcview for the Modern Side Table. This video demonstrates the general assembly process and features of the table.
Vận hành và sử dụng
The Tribesigns Modern Side Table is designed for versatile use in various indoor environments.
- Vị trí: Ideal for use as a bedside table, end table, or nightstand in living rooms, bedrooms, or other indoor spaces.
- Sức chịu tải: The tabletop can support items up to 200 pounds (90.7 kg). Distribute weight evenly.
- Sử dụng bề mặt: Use coasters under drinks and protective pads under hot items to prevent damage to the surface.
Figure 5: Side table in a living room setting.
Figure 6: Versatile use in diverse scenarios.
BẢO TRÌ
- Vệ sinh: Wipe the table surface with a dry cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
- Sự cố tràn: Lau sạch ngay lập tức mọi vết đổ để tránh hư hại do độ ẩm.
- Điều tra: Periodically check all connections and hardware to ensure they remain tight. Re-tighten as needed.
- Tiếp xúc với ánh sáng mặt trời: Avoid prolonged direct sunlight exposure to prevent fading or discoloration of the wood finish.
Figure 7: Natural Wood Finish Detail.
Xử lý sự cố
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Chiếc bàn bị lung lay. | Sàn không bằng phẳng; kết nối lỏng lẻo. | Ensure the table is on a level surface. Check and tighten all screws and fasteners. Adjust non-slip pads if necessary. |
| Các bộ phận không khớp với nhau. | Lắp đặt sai hướng; sử dụng linh kiện không đúng. | Refer to the assembly guide diagrams to ensure correct part orientation and usage. Do not force parts together. |
| Thiếu linh kiện. | Lỗi đóng gói. | Liên hệ bộ phận hỗ trợ khách hàng để thay thế phụ tùng. |
Thông số kỹ thuật
| Tính năng | Chi tiết |
|---|---|
| Thương hiệu | Bộ lạc |
| Số hiệu mẫu | F2240-SIDE |
| Kích thước sản phẩm (D x R x C) | 15.75"D x 23.62"W x 23.62"H (40 cm x 60 cm x 60 cm) |
| Trọng lượng sản phẩm | 30.2 pound (13.7 kg) |
| Khuyến nghị trọng lượng tối đa | 200 pound (90.7 kg) |
| Vật liệu khung | Gỗ công nghiệp (MDF) |
| Màu sắc | Màu gỗ tự nhiên |
| Thiết kế bảng | Bàn cuối |
| Kiểu chân | Trapezoid Base |
| Số lượng mặt hàng | 1 |
| Số lượng người được khuyến nghị để lắp ráp | 2 |
| Công cụ được đề xuất để lắp ráp | Cái vặn vít |
| Sử dụng trong nhà ngoài trời | Trong nhà |
Thông tin bảo hành
This Tribesigns product comes with a limited manufacturer's warranty of 180 days from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper assembly, misuse, abuse, accidents, or unauthorized modifications.
Vui lòng giữ lại bằng chứng mua hàng của bạn để yêu cầu bảo hành.
Ủng hộ
For assistance with assembly, missing parts, or any other inquiries regarding your Tribesigns Modern Side Table, please contact Tribesigns customer support. Refer to the contact information provided in your product packaging or visit the official Tribesigns webtrang web cho các tài nguyên hỗ trợ.
Tài nguyên trực tuyến: Visit the Tribesigns Store on Amazon