IHSENO Tuya WiFi Motion Sensor (Chang Miton Sensor) Instruction Manual

1. Giới thiệu

Thank you for choosing the IHSENO Tuya WiFi Motion Sensor. This device is designed to enhance your home security and automation by detecting human presence and movement. It integrates seamlessly with the Tuya Smart Life App, allowing for remote monitoring and control. Please read this manual carefully before installation and use to ensure proper operation and maximize the sensor's capabilities.

2. Sản phẩm hếtview và Tính năng

The IHSENO Tuya WiFi Motion Sensor is a Passive Infrared (PIR) detector that identifies human presence and movement within its detection range. Key features include:

• Điều khiển từ xa bằng ứng dụng: Monitor your home's security from anywhere using the mobile application.
• Phát hiện chuyển động: Capable of detecting various human movements, from walking to subtle gestures.
• Static Human Presence Detection: Advanced detection allows the sensor to identify human presence even when there is no active movement (e.g., sitting still).
• Nhật ký hoạt động: Review historical records of detected human presence directly through the app.
• Các thông số có thể điều chỉnh: Customize settings such as detection distance and sensitivity via the mobile application.
• Liên kết cảnh: Integrate with other Tuya smart devices for automated actions (e.g., turning on lights when motion is detected).
• Báo động nguồn điện thấp: Receive notifications when the battery level is low, prompting a battery change.
• Wide-Angle Infrared Detection: Features a 105° horizontal and 105° vertical detection angle, with a maximum detection distance of 6 meters (20 feet).

Figure 2.1: The IHSENO Tuya WiFi Motion Sensor and its remote monitoring capabilities via the mobile app, displaying a 'Someone alarm' notification.

Figure 2.2: Illustrations of the sensor's integration with smart cameras, automatic lighting, mobile notifications, and siren alarms for enhanced security.

Hình 2.3: Chi tiết view of the sensor's 105° wide-angle infrared detection capabilities, including horizontal and vertical detection ranges and a 6-meter detection distance.

Figure 2.4: The motion sensor demonstrating scene linkage with various Tuya smart devices, enabling integrated smart home automation.

3. Nội dung gói hàng

Vui lòng kiểm tra gói hàng để biết các mục sau:

• 1 x Cảm biến chuyển động PIR
• 1 x Hướng dẫn sử dụng (tài liệu này)
• 1 x Băng dính hai mặt

Note: AAA Alkaline batteries are required but not included in the package.

4. Thông số kỹ thuật

5. Hướng dẫn cài đặt

5.1 Lắp đặt pin

1. Gently open the back cover of the PIR motion sensor.
2. Insert the required AAA Alkaline batteries (not included), ensuring correct polarity (+/-).
3. Đóng nắp lưng lại một cách an toàn.

Figure 5.1: The sensor is powered by AAA Alkaline batteries. Ensure batteries are installed correctly.

5.2 Tải ứng dụng và tạo tài khoản

1. Tải xuống Tuya thông minh or Cuộc sống thông minh Tải ứng dụng từ cửa hàng ứng dụng trên điện thoại thông minh của bạn (iOS App Store hoặc Google Play Store).
2. Đăng ký tài khoản mới hoặc đăng nhập nếu bạn đã có tài khoản.

5.3 Ghép nối thiết bị

1. Hãy đảm bảo điện thoại thông minh của bạn được kết nối với mạng. Mạng WiFi 2.4 GHz. The sensor does not support 5GHz WiFi.
2. Mở ứng dụng Tuya Smart hoặc Smart Life.
3. Nhấn vào biểu tượng "+" ở góc trên bên phải để thêm thiết bị.
4. Select "Security & Video Surveillance" > "PIR Detector" or search for "Motion Sensor".
5. Follow the on-screen instructions to put the sensor into pairing mode (usually involves pressing and holding a reset button until an indicator light flashes).
6. Confirm the indicator light is flashing rapidly in the app and enter your 2.4GHz WiFi password.
7. Wait for the device to connect. Once connected, you can rename the sensor and assign it to a room.

5.4 Gắn cảm biến

1. Choose a suitable location for mounting. Consider areas where human movement is expected, such as hallways, entryways, or rooms.
2. Ensure the chosen location is within the sensor's detection range (up to 6 meters) and has a clear line of sight.
3. Làm sạch bề mặt lắp đặt kỹ lưỡng.
4. Peel off the protective film from the double-sided adhesive provided.
5. Attach the adhesive to the back of the sensor and then firmly press the sensor onto the desired wall or surface.

6. Hướng dẫn vận hành

6.1 Giám sát từ xa qua ứng dụng

Once paired, you can monitor the sensor's status and receive alerts directly on your smartphone through the Tuya Smart or Smart Life app. The app will display real-time notifications when motion or presence is detected.

6.2 Adjusting Sensor Parameters

Within the app, navigate to the sensor's settings to customize its behavior:

• Độ nhạy PIR: Adjust the sensitivity level (e.g., Low, Middle, High) to prevent false alarms or ensure detection of subtle movements.
• Keep Time (Cooldown Time): Set the duration for which the sensor remains in a 'triggered' state after detection. This prevents repeated triggers within a short period. The shortest setting can be 30 seconds, and the longest 120 seconds.
• Báo động chuyển động: Enable or disable motion detection alerts.
• Lower Battery Notification: Turn on/off alerts for low battery status.
• SMS/Phone Notification: Configure additional notification methods (may require subscription or specific regional services).

Figure 6.1: Screenshot of the app interface showing adjustable parameters for the motion sensor.

6.3 Scene Linkage with Other Smart Devices

Leverage the Tuya ecosystem to create smart scenes:

1. In the app, go to the "Smart" or "Automation" section.
2. Create a new automation.
3. Set the condition: "When device status changes" > select your motion sensor > "Motion detected".
4. Set the action: "Run the device" > select another Tuya-compatible device (e.g., a smart light, smart curtain, or smart alarm) > define the action (e.g., "Turn On", "Open").
5. Hãy lưu lại quy trình tự động hóa.

7. Bảo trì

7.1 Thay thế pin

When you receive a low battery notification from the app, or if the sensor's performance degrades, replace the AAA Alkaline batteries promptly. Refer to Section 5.1 for battery installation instructions.

7.2 Vệ sinh

To ensure optimal performance, periodically clean the sensor's lens with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the device.

KHAI THÁC. Xử lý sự cố

• Sensor not detecting motion:
  • Check battery level in the app and replace if low.
  • Ensure the sensor is mounted correctly and has a clear line of sight.
  • Adjust PIR sensitivity settings in the app to a higher level.
  • Hãy nhận thức được cooldown time (Keep Time) setting. If the sensor was recently triggered, it will not re-trigger until the cooldown period has passed. This is normal operation.
• Thường xuyên xảy ra báo động giả:
  • Adjust PIR sensitivity settings in the app to a lower level.
  • Ensure the sensor is not facing direct sunlight, heat sources, or areas with significant air currents (e.g., near vents), which can cause false triggers.
• Sensor offline in app:
  • Check your home's 2.4GHz WiFi network status.
  • Ensure the sensor is within range of your WiFi router.
  • Kiểm tra mức pin và thay thế nếu cần thiết.
  • Try restarting the sensor by removing and reinserting batteries.
  • If issues persist, try re-pairing the device with the app (refer to Section 5.3).

Figure 8.1: Explanation of the sensor's cooldown time, a crucial factor in understanding its detection behavior.

9. Lưu ý quan trọng và thông tin an toàn

• Thiết bị này yêu cầu Mạng WiFi 2.4 GHz for connectivity. It is not compatible with 5GHz WiFi networks.
• The sensor has a built-in cooldown time (Keep Time) after each detection. During this period, the sensor will not re-trigger, even if further motion is detected. This is a standard feature to conserve battery life and prevent excessive notifications. The cooldown time can be adjusted in the app from 30 to 120 seconds.
• Không để thiết bị ở nơi có nhiệt độ quá cao, ánh nắng trực tiếp hoặc độ ẩm cao.
• Để thiết bị tránh xa các trường điện từ mạnh.
• Thiết bị này chỉ được sử dụng trong nhà.
• Không tự ý tháo rời hoặc sửa chữa thiết bị. Hãy liên hệ với bộ phận hỗ trợ khách hàng nếu phát sinh vấn đề.

10. Bảo hành và Hỗ trợ

For warranty information or technical support, please refer to the seller's contact details on your purchase platform or the official IHSENO website. Please have your product model number (Chang Miton Sensor) and purchase details ready when contacting support.