Giới thiệu
This instruction manual provides essential information for the safe and effective use of your ATOMSTACK A40 PRO V2 Laser Engraver. Please read this manual thoroughly before operating the device to ensure proper setup, operation, and maintenance. Retain this manual for future reference.
Thông tin an toàn quan trọng
The ATOMSTACK A40 PRO V2 is a Class 4 laser product. Improper use can result in serious injury, including eye damage, skin burns, and fire. Always adhere to the following safety guidelines:
- Bảo vệ mắt: The device features a built-in panoramic magnetic filter cover designed to shield eyes from harmful laser light. This cover allows observation without additional protective goggles. Ensure it is always in place during operation.
- Giám sát: Tuyệt đối không được rời khỏi máy khắc laser khi máy đang hoạt động mà không có người giám sát.
- Thông gió: Operate the engraver in a well-ventilated area to dissipate fumes and smoke generated during engraving and cutting.
- An toàn phòng cháy chữa cháy: Keep a fire extinguisher nearby. The machine includes flame detection for added safety.
- Physical Barriers: The protective cover also helps prevent pets or unauthorized individuals from touching the laser spot.
- Sự ổn định: The machine is equipped with a tilt alarm that activates if the device exceeds a 15-degree tilt, indicating an unstable condition. Ensure the engraver is placed on a stable, level surface.
- Dừng khẩn cấp: Hãy làm quen với vị trí của công tắc nguồn để có thể tắt máy ngay lập tức trong trường hợp khẩn cấp.
- An toàn vật liệu: Only engrave or cut materials specified as safe. Avoid highly reflective, flammable, or toxic materials.
- Quản lý cáp: The newly added tank chain ensures neat and secure cable management, reducing trip hazards and preventing damage to wires.
Figure 1: Reinforced Safety Protection Features. This image illustrates the various safety mechanisms integrated into the ATOMSTACK A40 PRO V2, including limit switches to define the working area, a flame detector for fire prevention, a tilt alarm for stability, and a tank chain for organized cable routing.
Danh sách đóng gói
Before assembly, please verify that all components listed below are present in your package. If any items are missing or damaged, contact customer support immediately.
Figure 2: Contents of the ATOMSTACK A40 PRO V2 Package. This image displays all items included in the product box, such as the laser engraver unit, air pump, power supply, various connection cables (USB, Type-C, laser, Z-axis), an installation toolkit, safety goggles, a focusing piece, and the user manual.
Gói này thường bao gồm:
- ATOMSTACK A40 PRO V2 Laser Engraver Main Unit
- Air Pump and Air Pump Power Cable
- Bộ chuyển đổi nguồn và cáp nguồn
- USB Cable, Type-C Cable, Laser Cable, Z-axis Connection Cable
- Bộ công cụ cài đặt
- Kính bảo hộ
- Focusing Piece (8mm)
- Hướng dẫn sử dụng
Thiết lập và lắp ráp
The ATOMSTACK A40 PRO V2 features an all-aluminum alloy anodized structure designed for straightforward assembly. The pre-designed structure allows for quick setup, typically within 10-20 minutes.
- Giải nén các thành phần: Cẩn thận lấy tất cả các mặt hàng ra khỏi bao bì và đối chiếu với danh sách đóng gói.
- Lắp ráp khung: Follow the detailed instructions in the included user manual to assemble the main frame of the engraver. Ensure all screws are tightened securely.
- Cài đặt Mô-đun Laser: Mount the laser module onto the gantry according to the manual's diagrams.
- Kết nối cáp: Connect all necessary cables, including power, USB, and laser module cables. Ensure the tank chain is properly utilized for cable management.
- Position Air Assist: Connect the air pump to the air assist nozzle on the laser module.
- Bật nguồn: Kết nối bộ chuyển đổi nguồn với máy khắc và ổ cắm điện phù hợp.
Figure 3: Convenient Design Features. This image highlights the magnetic protective cover that filters strong light, the one-click autofocus mechanism for quick setup, and the cross positioning cursor for precise material alignment.
Hướng dẫn sử dụng
Cài đặt và kết nối phần mềm
The ATOMSTACK A40 PRO V2 supports various software for operation:
- Phần mềm máy tính để bàn: Compatible with LaserGRBL and LightBurn. These programs run on Win XP / Win 7 / Win 8 / Win 10 systems.
- Exclusive Software: "AtomStack Studio" offers a material library and automatic accessory recognition, simplifying the engraving process.
- Ứng dụng di động: The "AtomStack" App is available for smartphone control.
Connect the engraver to your computer via USB. The device supports file formats such as NC, BMP, JPG, PNG, and DXF.
Figure 4: Versatile Operation Methods. This image illustrates the multiple ways to control the engraver, including smartphone app, various wired connections, and compatibility with popular laser software. It also highlights the resumable engraving feature.
Điều chỉnh tiêu điểm
The A40 PRO V2 features a fixed-focus laser, eliminating the need for manual adjustment. For precise focusing, use the one-touch auto-focus feature, which achieves pinpoint accuracy in approximately 8 seconds via the touchscreen button, LightBurn software, or the AtomStack app.
Engraving and Cutting Modes
The laser module allows seamless toggling between 20W engraving and 40W cutting power with a single button. This dual-mode system optimizes performance for detailed engraving or powerful cutting tasks.
Figure 5: Switchable Power and Finer Spot. This image illustrates the laser module's ability to switch between engraving and cutting power, highlighting the fine laser spot size (0.08*0.1mm) that enables deeper and more precise cuts on various materials like wood, MDF, and stainless steel.
Air Assist Function
The A40 PRO V2 includes a high-flow air assist kit. This system automatically turns on/off via LightBurn’s M7 mode, optimizing cutting and engraving performance by boosting cutting power and delivering sharper edges with cleaner finishes.
Figure 6: Automatic Air Assist for Cleaner Cuts. This image visually compares the results of cutting with and without the automatic air assist, clearly showing that the air assist produces significantly cleaner edges and reduces charring.
Material Compatibility and Performance
The engraver offers a large working area of 395x385mm and operates at a maximum speed of 400mm/s, with an engraving precision of 0.01mm. The ultra-fine laser focus area is reduced to 0.1x0.1mm.
Engraveable Materials: Wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective electroplated and painted metal layers, 304 mirror stainless steel, glass, ceramic, cotton cloth, stone.
Cuttable Materials: Cardboard, non-woven fabric, wood (up to 20mm basswood, 25mm pine and paulownia wood), acrylic, certain thin plastic sheets, sponge, 12mm MDF.
Figure 7: Material Versatility. This image showcases a wide range of materials that can be processed by the ATOMSTACK A40 PRO V2, demonstrating its capability for diverse DIY, craft, and industrial applications.
BẢO TRÌ
Regular maintenance ensures optimal performance and extends the lifespan of your ATOMSTACK A40 PRO V2.
- Vệ sinh ống kính: Thường xuyên lau sạch thấu kính laser bằng vải mềm, không xơ và dung dịch vệ sinh thấu kính để duy trì công suất và độ chính xác của laser.
- Vệ sinh máy: Keep the engraving area and gantry rails free from dust, debris, and material residue. Use a soft brush or compressed air.
- Bôi trơn: Apply a small amount of lubricant to the linear guide rails as recommended in the detailed user manual to ensure smooth movement.
- Kiểm tra cáp: Regularly check all cables for wear or damage. Ensure connections are secure.
- Cập nhật chương trình cơ sở: Kiểm tra ATOMSTACK chính thức webtrang web hoặc ứng dụng để biết bất kỳ bản cập nhật chương trình cơ sở nào có sẵn nhằm đảm bảo máy của bạn có các tính năng mới nhất và sửa lỗi.
Xử lý sự cố
This section addresses common issues you might encounter. For more complex problems, refer to the comprehensive user manual or contact customer support.
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Tia laser không bắn | Power cable loose, laser module not connected, software settings incorrect, emergency stop engaged. | Check all power and data connections. Verify laser settings in software. Ensure no safety features are activated. |
| Chất lượng khắc/cắt kém | Incorrect focus, wrong power/speed settings, dirty lens, material not suitable. | Perform auto-focus. Adjust power and speed settings for the specific material. Clean the laser lens. Ensure material is compatible. |
| Máy không kết nối với máy tính/ứng dụng | USB cable faulty, driver issues, incorrect port selection, Wi-Fi issues. | Try a different USB cable/port. Reinstall drivers. Ensure correct COM port is selected in software. Check Wi-Fi connection for app control. |
| Máy dừng giữa chừng khi đang hoạt động | Power interruption, software error, limit switch triggered, flame detected. | Check power supply. Restart software. Clear any obstructions. If power outage, use AtomStack APP's resume-from-pause feature. Address flame detection if applicable. |
Thông số kỹ thuật
| Mô hình sản phẩm | ATOMSTACK A40 PRO V2 |
| Kích thước khắc | 395 x 385mm |
| Tổng công suất | 210W |
| Laser Power (Cutting Mode) | 180W |
| Công suất đầu ra của Laser | 40000mW |
| Lớp Laser | 4 |
| Bước sóng Laser | 455 ± 5 mét vuông |
| Độ chính xác khắc | 0.01mm |
| Điều chỉnh tiêu điểm | Fixed-focus laser, automatic adjustment |
| Công tắc giới hạn | 2 (1 cho trục X, 1 cho trục Y) |
| Vỏ bảo vệ laser | Built-in, magnetic filter |
| Phần mềm được hỗ trợ | LaserGRBL, LightBurn, AtomStack Studio, AtomStack App |
| Hệ điều hành | Win XP / Win 7 / Win 8 / Win 10 |
| File Định dạng | NC, BMP, JPG, PNG, DXF |
| Chuyển dữ liệu | Kết nối USB |
| Nguồn điện | Đầu vào: 100-240V AC, 50/60Hz; Đầu ra: 24V 9A |
| Chứng nhận | CE, FCC, RoHS, FDA, PSE |
| Kích thước sản phẩm | 22.24 x 22.83 x 7.59 inch |
| Trọng lượng sản phẩm | 12.59 pound |
| Nhà sản xuất | Thâm Quyến AtomStack Technologies Co., Ltd. |
Bảo hành và Hỗ trợ
For information regarding product warranty, please refer to the warranty card included with your purchase or visit the official ATOMSTACK website. For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact the seller or manufacturer directly.
Nhà sản xuất: Thâm Quyến AtomStack Technologies Co., Ltd.
Thông tin liên lạc: Refer to your purchase documentation or the official ATOMSTACK webtrang web để biết thông tin liên hệ hỗ trợ mới nhất.