1. Giới thiệu
The ECOELER Motion Sensor Light Switch (Model YM2112) provides automated lighting control using Passive Infrared (PIR) motion detection. This device is designed for single-pole applications and requires a neutral wire for installation. It offers adjustable settings for sensitivity, ambient light detection, and time delay, allowing customization for various indoor environments such as bathrooms, laundry rooms, closets, and garages.
Figure 1: ECOELER Motion Sensor Light Switch with faceplate.
2. Thông tin an toàn
- CẢNH BÁO: Để tránh hỏa hoạn, điện giật hoặc tử vong, hãy tắt nguồn điện tại cầu dao hoặc hộp cầu chì và kiểm tra xem nguồn điện đã tắt hoàn toàn chưa trước khi đấu dây.
- Việc lắp đặt phải do thợ điện có trình độ chuyên môn hoặc người am hiểu sâu sắc về hệ thống dây điện thực hiện.
- This device is for single-pole applications only. Do not use in 3-way or multi-way circuits.
- A neutral wire is required for operation. Ensure your electrical box has a neutral wire (typically white) before installation.
- Không vượt quá mức tối đatage ratings: 150W for LED/CFL, 300W for Incandescent/Halogen.
- Chỉ sử dụng dây đồng.
3. Nội dung gói hàng
Xác minh rằng tất cả các thành phần đều có sẵn trước khi bắt đầu cài đặt:
- Motion Sensor Light Switch (YM2112)
- Tấm tường
- Hướng dẫn cài đặt
- Vít lắp (4 cái)
Figure 2: Included components: Motion Sensor Light Switch, wall plate, and mounting screws.
4. Tính năng
- Điều khiển rảnh tay: Automatically activates lighting upon motion detection.
- Lựa chọn chế độ: Choose between Occupancy (OCC) and Vacancy (VAC) modes.
- Cài đặt có thể điều chỉnh: Customizable time delay (15s to 30min), sensitivity (20% to 100%), and ambient light sensing (dark to day).
- Khả năng tương thích rộng: Supports LED/CFL (up to 150W) and Incandescent/Halogen (up to 300W) bulbs.
- Single Pole Control: Designed for single-pole circuits only.
- Phạm vi phát hiện rộng: 180° detection angle with a maximum range of 26 feet (8 meters).
- Kết cấu bền bỉ: Features a tough thermoplastic housing for impact and scratch resistance.
5. Cài đặt
5.1 Danh sách kiểm tra cài đặt trước
- Ensure power is OFF at the circuit breaker before starting.
- Confirm the presence of a neutral wire (typically white) in your electrical box. This switch requires a neutral wire.
- Verify that the circuit is a single-pole setup. This switch is not compatible with 3-way or multi-way circuits.
5.2 Hướng dẫn đấu dây
Follow the wiring diagram carefully. If you are unsure about any steps, consult a qualified electrician.
- Tắt nguồn điện tại cầu dao điện.
- Tháo tấm tường hiện có và công tắc.
- Identify the wires: Hot (Black), Load (Red, or another color connected to the light), Neutral (White), and Ground (Green or bare copper).
- Connect the wires from the wall box to the corresponding terminals on the ECOELER Motion Sensor Light Switch as shown in the wiring diagram below.
- Secure the switch into the wall box with the provided screws.
- Gắn tấm ốp tường mới.
- Khôi phục nguồn điện tại máy cắt mạch.
- Allow a 30-second warm-up period after power is restored for the sensor to calibrate.
Figure 3: Wiring Diagram for Model YM2112.
| Circuit Box Wire | Screw on YM2112 Switch |
|---|---|
| Power wire (hot) | Đen |
| Load to power light or fan | Vàng |
| Green or non-insulated (copper) ground wire | Màu xanh lá |
| Neutral (required) | Bạc |
Ghi chú: There is a 30-second warm-up period after each power reset. During this time, the sensor may not respond immediately.
6. Hoạt động
The ECOELER Motion Sensor Light Switch offers three primary operation modes: Occupancy (OCC), Vacancy (VAC), and OFF. These modes are selected using the internal switches located behind the faceplate.
Figure 4: Operation Modes Diagram.
6.1 Occupancy (OCC) Mode
- Chức năng: Automatic ON and Automatic OFF.
- Hành vi: The light automatically turns ON when motion is detected and automatically turns OFF after a set time delay when no motion is detected.
- Lý tưởng cho: High-traffic areas where hands-free operation is desired, such as bathrooms, laundry rooms, and closets.
6.2 Vacancy (VAC) Mode
- Chức năng: Manual ON and Automatic OFF.
- Hành vi: The light must be manually turned ON by pressing the ON/OFF button. It will then automatically turn OFF after a set time delay when no motion is detected.
- Lý tưởng cho: Areas where you prefer to control when the light turns on, but still want the energy-saving benefit of automatic shut-off, such as offices or living rooms.
6.3 Chế độ TẮT
- Chức năng: Manual ON and Manual OFF.
- Hành vi: The light is controlled entirely manually by pressing the ON/OFF button. Motion detection is disabled for light activation, but the sensor may still detect motion (indicated by an LED flash) without triggering the light.
- Lý tưởng cho: Situations where automatic control is not desired, or for testing purposes.
7. Cài đặt tùy chỉnh
The ECOELER Motion Sensor Light Switch features adjustable settings for optimal performance. These settings are accessed by carefully removing the faceplate to reveal the adjustment dials and switches.
Hình 5: Nội bộ view of adjustable settings.
Hình 6: Chi tiết view of customizable settings.
7.1 Adjustable Sensitivity (SENSE)
- Phạm vi: Low (20%) to High (100%).
- Chức năng: Controls how easily the sensor detects motion.
- Điều chỉnh: Turn the 'SENSE' dial to increase or decrease the detection range and responsiveness. Higher sensitivity detects smaller movements or movements further away.
7.2 Adjustable Light Level (LIGHT)
- Cài đặt: Day, Dim, Dark.
- Chức năng: Determines the ambient light level at which the sensor will activate the lights.
- Điều chỉnh: Select 'Day' for activation regardless of ambient light, 'Dim' for activation in low light conditions (evening), and 'Dark' for activation only in very low light (night).
7.3 Adjustable Time Delay (TIME)
- Phạm vi: 15 seconds, 1 minute, 5 minutes, 15 minutes, 30 minutes.
- Chức năng: Sets how long the light remains ON after the last detected motion.
- Điều chỉnh: Select the desired time delay using the 'TIME' dial.
8. Phạm vi phát hiện
The ECOELER Motion Sensor Light Switch utilizes Passive Infrared (PIR) technology to detect human body heat movement. It offers a wide detection area for effective coverage in various room layouts.
- Góc phát hiện: 180 độ.
- Tầm xa tối đa: Up to 26 feet (approximately 8 meters) from the front, and up to 15 feet (approximately 4.5 meters) on the sides.
- Vị trí: For optimal performance, install the switch in a location where its field of view is not obstructed by furniture, doors, or other objects.
Figure 7: Motion Detection Coverage Area.
9. Bảo trì
The ECOELER Motion Sensor Light Switch requires minimal maintenance. Follow these guidelines to ensure proper function and longevity:
- Vệ sinh: Gently wipe the surface of the switch and sensor lens with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the device.
- Vật cản: Ensure the sensor lens is free from dust, dirt, or any obstructions that could interfere with motion detection.
- Kiểm tra thường xuyên: Periodically test the switch's functionality to ensure it is operating correctly in your chosen mode and settings.
- Power Off for Service: Always turn off power at the circuit breaker before performing any maintenance that involves removing the wall plate or accessing internal components.
KHAI THÁC. Xử lý sự cố
If you experience issues with your ECOELER Motion Sensor Light Switch, refer to the following common problems and solutions:
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Light does not turn ON with motion. | 1. Tắt nguồn. 2. Đấu dây không chính xác. 3. Sensor lens obstructed. 4. Độ nhạy đặt quá thấp. 5. Light level setting too high (e.g., 'Dark' in a bright room). 6. Switch is in VAC or OFF mode and not manually activated. | 1. Kiểm tra cầu dao. 2. Verify wiring connections (refer to Section 5.2). Ensure neutral wire is connected. 3. Clear any obstructions from the sensor lens. 4. Increase sensitivity setting (refer to Section 7.1). 5. Adjust light level setting (refer to Section 7.2). 6. Switch to OCC mode or manually activate in VAC mode. |
| Light turns ON too frequently or unexpectedly. | 1. Độ nhạy được đặt quá cao. 2. Sensor detecting motion outside desired area (e.g., pets, drafts). 3. Switch is in OCC mode in a high-traffic area. | 1. Decrease sensitivity setting (refer to Section 7.1). 2. Reposition the switch or adjust sensitivity to narrow detection. 3. Consider switching to VAC mode if manual activation is preferred. |
| Light turns OFF too quickly or stays ON too long. | Cài đặt độ trễ thời gian không chính xác. | Adjust the time delay setting to your preference (refer to Section 7.3). |
| Light flickers or does not work with certain bulbs. | Incompatibility with bulb type or wattage vượt quá. | Ensure bulbs are within specified wattage limits (LED/CFL up to 150W, Incandescent/Halogen up to 300W). Try a different type of compatible bulb. |
| Switch does not respond after power restoration. | Warm-up period not completed. | Allow 30 seconds for the sensor to warm up and calibrate after power is restored. |
11. Thông số kỹ thuật
| Thuộc tính | Chi tiết |
|---|---|
| Số hiệu mẫu | YM2112 |
| Nguồn điện | Điện có dây |
| Tậptage | 120V AC 60Hz |
| Tải trọng tối đa (LED/CFL) | 150W |
| Max Load (Incandescent/Halogen) | 300W |
| Kiểu lắp đặt | Treo tường |
| Góc phát hiện | 180 độ |
| Phạm vi tối đa | 26 feet (8 mét) |
| Nhiệt độ hoạt động | 32°F đến 104°F (0°C đến 40°C) |
| Kích thước sản phẩm (D x R x C) | 115D x 40W x 68H millimeters (4.53 x 1.57 x 2.68 inches) |
| Trọng lượng sản phẩm | 0.15 pound (68 gram) |
| Dây trung tính | Yêu cầu |
| Nước xuất xứ | Trung Quốc |
12. Bảo hành
The ECOELER Motion Sensor Light Switch (Model YM2112) comes with a one-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims or service, please contact ECOELER customer support.
13. Hỗ trợ
For technical assistance, troubleshooting, or general inquiries regarding your ECOELER Motion Sensor Light Switch, please contact our support team:
- E-mail: SUPPORTS@ECOELER.COM
- Nhà sản xuất: ECOELER ELECTRIC INC