Dapper Supply DP-WPFS1204

User Manual: Dapper Supply Battery Powered Walk Behind Mini Automatic Floor Scrubber Machine

Model: DP-WPFS1204

1. Giới thiệu

Welcome to the Dapper Supply family! This user manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new Battery Powered Walk Behind Mini Automatic Floor Scrubber Machine. Please read this manual thoroughly before operating the machine to ensure optimal performance and longevity.

2. Thông tin an toàn

Sự an toàn của bạn và của người khác là trên hết. Luôn tuân thủ các hướng dẫn an toàn sau:

  • Đọc kỹ hướng dẫn trước khi sử dụng thiết bị.
  • Do not operate the machine with wet hands or in wet conditions unless specifically designed for it.
  • Giữ trẻ em và vật nuôi tránh xa máy trong quá trình vận hành.
  • Use only Dapper Supply approved accessories and replacement parts.
  • Ensure the machine is unplugged before performing any maintenance or cleaning.
  • This machine is designed for tile, vinyl, hardwood, laminate, concrete, and other sealed hard floors. It is not intended for use on carpets or rugs.
  • Do not use flammable or combustible liquids with the machine.
  • Store the machine in a dry, secure location when not in use.

3. Sản phẩm hếtview

3.1 Thành phần

The Dapper Supply Mini Automatic Floor Scrubber comes with the following components:

  • Main Scrubber Unit
  • Tay cầm có thể điều chỉnh
  • Solution Tank (1.2-gallon capacity)
  • Recovery Tank (1.5-gallon capacity)
  • Bộ sạc và dây nguồn
  • Set of White Scouring Pads (included)
  • Scrubbing Brushes (optional/additional purchase)
  • Polishing Pads (optional/additional purchase)
Dapper Supply Mini Automatic Floor Scrubber with all included accessories
Figure 3.1: Main Scrubber Unit with Charger, Brushes, and Pads.
Bên view of the Dapper Supply Mini Automatic Floor Scrubber
Hình 3.2: Mặt bên view of the assembled floor scrubber.
Dapper Supply Mini Automatic Floor Scrubber with recovery tank removed
Figure 3.3: Recovery tank detached from the main unit.
Đứng đầu view of the Dapper Supply Mini Automatic Floor Scrubber with solution tank lid open
Figure 3.4: Solution tank access on top of the unit.
Close-up of the Dapper Supply Mini Automatic Floor Scrubber's recovery tank
Figure 3.5: The removable recovery tank.
Close-up of the Dapper Supply Mini Automatic Floor Scrubber's handle and control panel
Figure 3.6: Handle and control interface.
Mặt dưới view of the Dapper Supply Mini Automatic Floor Scrubber showing the scrubbing brushes
Figure 3.7: Underside with scrubbing brushes installed.
Mặt dưới view of the Dapper Supply Mini Automatic Floor Scrubber showing the polishing pads
Figure 3.8: Underside with polishing pads installed.
Compact side profile of the Dapper Supply Mini Automatic Floor Scrubber
Figure 3.9: Compact design for easy maneuverability.

3.2 Các tính năng chính

  • Compact & Efficient Cleaning: 15-inch cleaning width and 170 RPM brush speed.
  • Năng suất cao: Covers up to 12,900 ft² per hour.
  • Hiệu suất lâu dài: Powerful 24V system with up to 90 minutes runtime and 100-minute charge time.
  • Dual Tanks: 1.2-gallon solution tank and 1.5-gallon recovery tank for efficient water management.
  • Hoạt động yên tĩnh: Operates at just 65 dB, suitable for daytime cleaning.
  • Hiệu suất sấy vượt trội: 17-inch squeegee and 70W suction motor ensure quick water recovery.
  • Lightweight & Easy to Maneuver: Weighs 22 lbs, easy to transport and operate in tight spaces.
  • Versatile Floor Compatibility: Designed for tile, vinyl, hardwood, laminate, concrete, and other sealed hard floors.

4. Thiết lập

4.1 Tháo dỡ

Cẩn thận lấy tất cả các bộ phận ra khỏi bao bì. Kiểm tra xem có hư hỏng gì trong quá trình vận chuyển không. Giữ lại bao bì để bảo quản hoặc vận chuyển trong tương lai.

4.2 Lắp ráp

  1. Attach the adjustable handle to the main scrubber unit, ensuring it clicks securely into place.
  2. Open the brush/pad compartment on the underside of the machine.
  3. Install the desired scrubbing brushes or polishing pads by aligning them with the mounting points and securing them. (Refer to Figure 3.7 for brushes and Figure 3.8 for pads).
  4. Ensure the recovery tank is properly seated in its compartment. (Refer to Figure 3.3).

4.3 Sạc ban đầu

Before first use, fully charge the machine's battery. The powerful 24V system requires approximately 100 minutes for a full charge.

  1. Locate the charging port on the machine.
  2. Connect the charger to the machine and then plug the power cord into a standard electrical outlet.
  3. Đèn báo sạc sẽ hiển thị trạng thái sạc. Hãy ngắt kết nối khi pin đã được sạc đầy.

Video 4.1: Official product video demonstrating features including charging and operation. This video is provided by Dapper Supply.

5. Hướng dẫn vận hành

5.1 Đổ đầy bình chứa dung dịch

  1. Đảm bảo máy đã tắt.
  2. Open the lid of the solution tank located on the top of the unit. (Refer to Figure 3.4).
  3. Fill the tank with clean water and an appropriate, low-foaming floor cleaning solution. Do not overfill.
  4. Securely close the solution tank lid.

5.2 Khởi động máy

  1. Đảm bảo máy được đặt trên bề mặt phẳng và ổn định.
  2. Press and hold the power button on the handle for approximately 3 seconds until the machine powers on.
  3. Adjust the handle to a comfortable operating height.

5.3 Quy trình vệ sinh

The machine is designed for efficient cleaning of hard floor surfaces.

  • Gently push the machine forward to begin scrubbing. The solution will be dispensed, and the brushes/pads will rotate to clean the floor.
  • The 17-inch squeegee and 70W suction motor will recover the dirty water into the recovery tank, leaving floors dry and safe to walk on.
  • Move the machine in overlapping passes to ensure complete coverage.
  • The machine can cover up to 12,900 ft² per hour, making it ideal for small commercial spaces.

5.4 Xả hết bình chứa nước thải

It is crucial to empty the recovery tank after each use or when it reaches its maximum capacity (1.5 gallons).

  1. Tắt máy.
  2. Remove the recovery tank from the main unit. (Refer to Figure 3.3 and Figure 3.5).
  3. Carefully pour the dirty water into a suitable drain.
  4. Rinse the recovery tank with clean water to prevent residue buildup.
  5. Reinstall the clean recovery tank securely.

6. Bảo trì

6.1 Bảo trì hàng ngày

  • Sau mỗi lần sử dụng, hãy đổ hết dung dịch và rửa sạch cả bình chứa dung dịch và bình chứa nước thải.
  • Clean the squeegee blade to ensure effective water pickup. Inspect for wear and tear.
  • Lau sạch bên ngoài máy bằng quảng cáoamp vải.

6.2 Brush/Pad Replacement

Regularly inspect the scrubbing brushes or polishing pads for wear. Replace them when they show signs of reduced effectiveness.

  1. Turn off the machine and tilt it back to access the underside.
  2. Remove the worn brushes/pads by twisting or unlatching them. (Refer to Figure 3.7 and Figure 3.8).
  3. Install new brushes/pads, ensuring they are securely fastened.

6.3 Lưu trữ

When storing the machine for extended periods:

  • Hãy đảm bảo cả hai bình chứa đều trống và sạch sẽ.
  • Store the machine in a dry, temperature-controlled environment.
  • For optimal battery life, charge the battery fully before storage and recharge every 3-6 months if not in use.

KHAI THÁC. Xử lý sự cố

Tham khảo bảng dưới đây để biết các vấn đề thường gặp và giải pháp.

Vấn đềNguyên nhân có thểGiải pháp
Máy không bật được nguồn.Pin yếu hoặc hết.
Nút nguồn không được giữ đủ lâu.
Sạc đầy pin.
Nhấn và giữ nút nguồn trong 3 giây.
Poor water pickup (squeegee not working).Bể thu hồi đã đầy.
Lưỡi gạt nước bị bẩn hoặc mòn.
Suction motor issue.
Làm trống và làm sạch bể thu hồi.
Clean or replace the squeegee blade.
Contact customer support if suction motor is faulty.
Brushes/Pads not rotating.Brushes/pads not installed correctly.
Obstruction in brush area.
Reinstall brushes/pads securely.
Kiểm tra và loại bỏ bất kỳ mảnh vỡ nào.
Machine leaves streaks.Dirty solution tank.
Incorrect cleaning solution concentration.
Squeegee blade issue.
Clean the solution tank.
Adjust solution concentration as per manufacturer's guidelines.
Clean or replace squeegee blade.

8. Thông số kỹ thuật

Technical specifications for the Dapper Supply Mini Automatic Floor Scrubber:

Tính năngĐặc điểm kỹ thuật
Kích thước sản phẩm17 x 17 x 44 inch
Cân nặng22 Bảng Anh
Số hiệu mẫuDP-WPFS1204
Loại pin1 x pin 12V (bao gồm)
Thời gian chạyLên đến 90 phút
Thời gian sạcKhoảng 100 phút
Chiều rộng làm sạch15 inch
Tốc độ bàn chải170 vòng/phút
Dung tích bể chứa giải pháp1.2 gallon
Dung tích bình phục hồi1.5 gallon
Mức độ tiếng ồn65 dB
Chiều rộng Bóp17 inch
Công suất động cơ hút70W
Nhà sản xuấtDapper Supply
Nước xuất xứTrung Quốc

9. Bảo hành và Hỗ trợ

9.1 Bảo hành sản phẩm

The Dapper Supply Mini Automatic Floor Scrubber is backed by a full 1-Year Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

9.2 Hỗ trợ khách hàng

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Dapper Supply customer support:

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.