ECOELER YM2601-WH

ECOELER Motion Sensor Dimmer Switch (Model YM2601-WH) Instruction Manual

Your guide to installation, operation, and maintenance of your ECOELER Motion Sensor Dimmer Switch.

1. Giới thiệu

The ECOELER Motion Sensor Dimmer Switch provides convenient, hands-free lighting control with adjustable settings for various environments. This device integrates a motion sensor and an ambient light sensor to automate lighting based on presence and light levels, while also offering dimming capabilities for compatible bulbs. It is designed for single-pole circuits and requires a neutral wire for installation.

ECOELER PIR Motion Sensor Dimmer Switch with icons for advanced motion sensor, ambient light sensor, timer delay, fully dimmable, energy saving, and fire resistant features.

Hình ảnh: Trênview of the ECOELER PIR Motion Sensor Dimmer Switch highlighting its key features.

2. Tính năng sản phẩm

Điều khiển rảnh tay: Automatically detects presence and ambient light to activate or deactivate lights.
Customization Settings: Selectable occupancy (Auto ON, Auto OFF) or vacancy (Manual ON, Auto OFF) sensor modes. Adjustable time delay (15 sec, 1min, 5min, 15min, 30min).
Digital Dimmer: MCU-based control for smooth, flicker-free dimming with wide compatibility for various LED types.
Tương thích phổ quát: Works with dimmable LED/CFL (up to 150W) and Incandescent/Halogen (up to 300W) bulbs.
Single Pole Control: Designed for single-pole circuits only. Not suitable for 3-way circuits.
Cài đặt dễ dàng: Fits standard junction boxes and requires a neutral wire.
Thiết kế bền bỉ: Constructed with tough thermoplastic housing for impact and scratch resistance.

Diagram showing the adjustable settings on the ECOELER Motion Sensor Dimmer Switch, including dimmer level, time delay, sensitivity, ambient light, OCC/VAC mode, darkest brightness, and ON/OFF button.

Hình ảnh: Chi tiết view of the product features and adjustable settings on the dimmer switch.

3. Thông tin an toàn

WARNING: To avoid fire, shock, or death, turn OFF power at the circuit breaker or fuse box and test that power is OFF before wiring!

Thiết bị này được thiết kế để lắp đặt theo Bộ luật Điện Quốc gia và các quy định của địa phương.
Chúng tôi đề nghị một thợ điện có trình độ thực hiện việc lắp đặt này.
Chỉ sử dụng dây đồng.
Dây trung tính là cần thiết để thiết bị hoạt động đúng cách.
This switch is for single-pole applications only and is NOT suitable for 3-way circuits.

4. Nội dung gói hàng

ECOELER Motion Sensor Dimmer Switch
Tấm tường
Hướng dẫn cài đặt (hướng dẫn này)
Vít lắp
mũ dây

Image showing the ECOELER Motion Sensor Dimmer Switch with its dimensions, included wall plate, screws, and wiring caps.

Image: Product dimensions and included accessories.

5. Thông số kỹ thuật

Thuộc tính	Giá trị
Số hiệu mẫu	YM2601-WH
Hoạt động Voltage	120 Vôn (AC)
Xếp hạng hiện tại	10 Amps
tối đatage (Dimmable LED/CFL)	150W
tối đatage (Đèn sợi đốt/Đèn halogen)	300W
Loại công tắc	Single-pole (1-way)
Kiểu lắp đặt	Treo tường
Vật liệu	Copper, Metal, Polycarbonate
Kích thước (D x R x C)	6.86 x 4.2 x 11.48cm
Chứng nhận	ETL, FCC

Image illustrating universal compatibility of the dimmer switch with incandescent, CFL, and dimmable LED lamps, showing their respective wattage xếp hạng.

Image: Universal compatibility with various bulb types and their wattage xếp hạng.

6. Cài đặt

Follow these steps carefully to install your ECOELER Motion Sensor Dimmer Switch. Ensure power is OFF before beginning.

6.1 Cài đặt trước

Tắt nguồn: Tìm cầu dao hoặc hộp cầu chì và tắt nguồn điện đến vị trí công tắc. Kiểm tra xem nguồn điện đã tắt chưa bằng cách sử dụng đồng hồ đo điện áp.tage thử nghiệm.
Tháo công tắc cũ: Unscrew and carefully remove the existing wall plate and switch from the electrical box. Do not disconnect wires yet.
Xác định dây: Identify the following wires in your electrical box:
- Dây nóng (dây nguồn): Truyền tải điện từ cầu dao.
- Dây tải: Kết nối với bộ đèn.
- Dây trung tính: (Required) Typically white, often capped together with other neutral wires.
- Dây nối đất: (Recommended) Typically bare copper or green.

6.2 Hướng dẫn đấu dây

Connect the wires from the ECOELER Motion Sensor Dimmer Switch to the corresponding wires in your electrical box using the provided wiring caps.

Kết nối Đen wire from the switch to the Đường dây nóng wire from the wall.
Kết nối Màu đỏ wire from the switch to the Trọng tải wire from the wall.
Kết nối Trắng wire from the switch to the Trung lập wire from the wall.
Kết nối Màu xanh lá wire from the switch to the Đất wire from the wall.

Wiring diagram for the ECOELER Motion Sensor Dimmer Switch, showing connections for Hot (Black), Load (Red), Neutral (White), and Ground (Green) wires in a single-pole circuit.

Image: Wiring guide for single-pole installation, showing connections for Hot, Load, Neutral, and Ground wires.

6.3 Lắp đặt và hoàn thiện

Carefully push all wired connections into the electrical box.
Mount the switch into the electrical box using the provided screws.
Gắn tấm tường.
Bật lại nguồn điện tại cầu dao.

Video: Real installation and finished look of the ECOELER Motion Sensor Dimmer Switch.

7. Hướng dẫn vận hành

The ECOELER Motion Sensor Dimmer Switch offers flexible operation modes and customizable settings.

7.1 Sensor Modes (Occupancy vs. Vacancy)

The switch can be configured for two primary sensor modes:

Chế độ chiếm dụng (Tự động bật, Tự động tắt): The lights automatically turn ON when motion is detected and automatically turn OFF after a set time delay when no motion is detected.
Chế độ trống (Bật thủ công, Tắt tự động): The lights must be manually turned ON, but will automatically turn OFF after a set time delay when no motion is detected.

Diagram illustrating the difference between Occupancy Mode (Auto ON, Auto OFF) and Vacancy Mode (Manual ON, Auto OFF) for the sensor switch.

Image: Comparison of Occupancy and Vacancy sensor modes.

Video: Explanation of motion sensor switch operating modes and ambient light level detection.

7.2 Điều chỉnh cài đặt

The switch features adjustable dials for Time Delay, Sensitivity, and Ambient Light Level. These are typically located under a removable cover on the switch face.

Diagram of the programmable sensor switch showing dials for Time, Sense (Sensitivity), and Light (Ambient Light Level), along with Menu and Select buttons for mode selection.

Image: Programmable sensor switch with adjustable dials for time, sensitivity, and light level.

Thời gian trễ: Adjust how long the lights remain ON after the last detected motion. Options include 15 seconds (Test), 1 minute, 5 minutes, 15 minutes, and 30 minutes.
Độ nhạy: Adjust the motion detection range. Higher sensitivity detects motion over a larger area.
Ambient Light Level: In Occupancy mode, this setting determines the ambient light threshold below which the sensor will turn on the lights. For example, set to 'Dark' for lights to only turn on in low light conditions.

Image showing the adjustable time delay, sensitivity, and ambient light level settings on the motion sensor switch.

Image: Adjustable settings for time delay, sensitivity, and ambient light level.

7.3 Chức năng điều chỉnh độ sáng

Use the dimmer button (typically a rocker switch or slider) to manually adjust the brightness of the connected lights. The digital control ensures smooth, flicker-free dimming.

Image demonstrating the digital dimming feature of the switch, showing different light levels in a study, dining room, and children's room.

Image: Digital dimming in action, illustrating various brightness levels.

KHAI THÁC. Xử lý sự cố

Đèn không BẬT:
- Ensure power is ON at the circuit breaker.
- Verify all wiring connections are secure and correct (Hot, Load, Neutral, Ground).
- Check if the bulb is working and properly installed.
- Adjust the ambient light level setting; if set too high, lights may not turn on in bright conditions.
- Increase sensitivity if motion is not being detected.
Lights do not turn OFF:
- Ensure no continuous motion is occurring within the sensor's range.
- Check the time delay setting; a longer delay will keep lights on for longer.
- Reduce sensitivity if the sensor is detecting motion from outside the desired area.
Lights flicker or dim improperly:
- Ensure you are using dimmable LED/CFL or incandescent/halogen bulbs. Non-dimmable bulbs may flicker.
- Xác minh tổng lượng nướctage of connected bulbs does not exceed the switch's maximum rating (150W for LED/CFL, 300W for Incandescent/Halogen).

9. Bảo trì

To ensure optimal performance and longevity of your ECOELER Motion Sensor Dimmer Switch:

Vệ sinh: Lau sạch công tắc và tấm ốp tường bằng khăn mềm.amp vải. Không sử dụng chất tẩy rửa có tính mài mòn hoặc dung môi.
Tránh chướng ngại vật: Ensure the sensor lens is not obstructed by furniture, curtains, or other objects that could block motion detection.
Kiểm tra thường xuyên: Periodically check the switch for any loose connections or visible damage. If any issues are found, turn off power at the breaker and consult a qualified electrician.

10. Bảo hành và Hỗ trợ

The ECOELER Motion Sensor Dimmer Switch comes with a Bảo hành 1 năm, providing peace of mind regarding its quality and durability. For technical support, warranty claims, or any questions regarding your product, please contact ECOELER customer service.

Nhà sản xuất: ECOELER ELECTRIC INC

Liên hệ: SUPPORTS@ECOELER.COM

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.