HYVOHEX P100 Portable Electric Ball Pump Instruction Manual

1. Giới thiệu

The HYVOHEX P100 Portable Electric Ball Pump is designed for efficient and precise inflation of various sports balls. This device features a digital LED display, preset pressure functionality, and automatic shut-off, making it suitable for basketballs, soccer balls, volleyballs, and more. Its compact design and rechargeable battery ensure convenience and portability.

2. Nội dung gói hàng

Xác minh rằng tất cả các mục đều có trong gói hàng:

• 1 x HYVOHEX P100 Sports Pump
• 1 x Kim bóng
• 1 x USB-C Charging Cable (not explicitly listed but implied by rechargeable battery)

3. Tính năng sản phẩm

• Lạm phát nhanh: Quickly inflates sports balls, reducing manual effort and saving time.
• Vận hành thông minh: Equipped with a high-sensitivity pressure sensor and digital LED screen to detect current ball pressure and automatically stop upon reaching the preset pressure.
• Khả năng tương thích rộng: Supports a pressure range of 2-17 PSI, suitable for basketball, soccer, volleyball, and other inflatable sports equipment.
• Chức năng bộ nhớ: Retains the last pressure setting for quick and easy repeated use.
• Thiết kế di động: Compact, palm-sized unit with built-in hidden needle storage for easy transport and to prevent loss or damage of the needle.
• Pin sạc: Features a 1500mAh rechargeable battery for multiple inflations on a single charge, with USB-C charging and an LED battery indicator.

Image: The HYVOHEX P100 pump is compact and portable, fitting easily in one hand.

Image: The 1500mAh battery allows for inflation of approximately 45 balls per charge.

4. Thiết lập

1. Sạc thiết bị: Before first use, fully charge the ball pump using the provided USB-C cable. The LED battery indicator will show charging status.
2. Attach the Needle: Retrieve the inflation needle from the hidden storage compartment (located at the top of the pump). Carefully screw the needle into the inflation port on the top of the device.

Image: The inflation needle can be securely stored within the pump's top compartment.

5. Hướng dẫn vận hành

1. Bật nguồn: Press and hold the power button (central button) to turn on the device. The digital LED display will illuminate.
2. Chọn đơn vị áp suất: Long press the power button to cycle through pressure units: PSI, BAR, KPA. Release the button when your desired unit is displayed.
3. Đặt áp suất mong muốn: Use the '+' and '-' buttons to adjust the target pressure. Refer to the ball manufacturer's recommendations for optimal pressure (e.g., Basketball: 7-9 PSI, Football: 12-14 PSI, Soccer: 8-16 PSI, Volleyball: 4-5 PSI). The pump will remember your last setting.
4. Insert Needle: Carefully insert the attached needle into the ball's valve. The display will show the current pressure of the ball.
5. Bắt đầu lạm phát: Press the power button once to start inflation. The pump will automatically stop when the preset pressure is reached.
6. Tắt nguồn: Nhấn và giữ nút nguồn để tắt thiết bị.

Image: The pump is compatible with various sports balls, with recommended pressure ranges displayed.

Image: Long press the power button to switch between PSI, Bar, and KPA pressure units.

6. Bảo trì

• Sạc: Recharge the device regularly to maintain battery health. Use a standard USB-C charger.
• Needle Storage: Always store the inflation needle in its designated compartment when not in use to prevent bending or loss.
• Vệ sinh: Wipe the pump's exterior with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
• Kho: Bảo quản máy bơm ở nơi khô ráo, thoáng mát, tránh ánh nắng trực tiếp và nhiệt độ khắc nghiệt.

KHAI THÁC. Xử lý sự cố

• Máy bơm không hoạt động: Ensure the battery is charged. Connect to a USB-C power source and allow it to charge for at least 30 minutes before attempting to power on again.
• Ball not inflating: Check that the needle is securely attached to the pump and fully inserted into the ball's valve. Verify that the preset pressure is higher than the current ball pressure.
• Đo áp suất không chính xác: Ensure the needle is fully inserted into the ball's valve. If the issue persists, try recalibrating by turning the pump off and on again.
• Pump stops prematurely: The pump automatically stops when the preset pressure is reached. If it stops before the ball is firm enough, increase the preset pressure.
• Máy bơm gây ồn: A certain level of operating noise is normal for air pumps. If the noise is excessive or unusual, ensure no obstructions are present in the air intake or output.

8. Thông số kỹ thuật

9. Thông tin an toàn

• Do not use the pump for purposes other than inflating sports balls.
• Keep out of reach of children. Adult supervision is recommended during use.
• Avoid over-inflating balls beyond their recommended pressure, as this can cause damage or injury.
• Không để thiết bị tiếp xúc với nước hoặc nhiệt độ quá cao.
• Không tự ý tháo rời hoặc sửa chữa thiết bị. Hãy liên hệ với bộ phận hỗ trợ khách hàng nếu phát sinh vấn đề.
• Ensure the inflation needle is properly secured before use to prevent accidental detachment.

10. Bảo hành và Hỗ trợ

Specific warranty details and customer support contact information are not provided within this document. Please refer to the manufacturer's official website or the product packaging for comprehensive warranty terms and support options.