Karcher K 1

Kärcher K 1 Electric Pressure Washer User Manual

Mẫu: K 1

1. Sản phẩm hếtview

The Kärcher K 1 Compact Electric Pressure Washer is designed for light-duty cleaning tasks around your home. It provides 1700 PSI of pressure and a flow rate of 1.45 GPM, making it suitable for cleaning patio furniture, bicycles, small decks, and other similar surfaces. Its compact and lightweight design ensures ease of portability and storage.

Các tính năng chính:

  • 1700 PSI Pressure: Effectively removes dirt and grime.
  • Lưu lượng 1.45 GPM: Efficient water usage for cleaning.
  • Cần phun Vario Power: Adjustable pressure control for different surfaces.
  • Súng phun bọt: Included for easy application of cleaning solutions.
  • Nhỏ gọn và nhẹ: Weighs approximately 9.8 lbs for easy transport and storage.
  • Bộ nhớ trên bo mạch: Conveniently store the hose, spray lance, and trigger gun.
Kärcher K 1 Pressure Washer with components labeled
Figure 1: Kärcher K 1 Pressure Washer and its main components, including the carrying handle, motor, onboard accessory storage, spray gun, 10 ft kink-resistant high-pressure hose, and Vario Power spray wand.

2. Thông tin an toàn

Please read and understand all safety warnings and instructions before operating the pressure washer. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

Cảnh báo An toàn Chung:

  • An toàn điện: Always connect the pressure washer to a grounded outlet. Do not operate with damaged cords or plugs. Keep all connections dry and off the ground.
  • Nguy cơ áp suất cao: The high-pressure jet can be dangerous if misused. Never direct the spray at people, pets, electrical devices, or the unit itself.
  • Thiết bị bảo vệ cá nhân: Always wear appropriate eye protection (safety glasses) and hearing protection when operating the pressure washer.
  • Sự ổn định: Ensure the pressure washer is on a stable, level surface to prevent tipping during operation.
  • Nguồn cung cấp nước: Connect the unit to a cold water supply only. Do not use hot water.
  • Hóa chất: Use only detergents approved for pressure washers. Follow detergent manufacturer's instructions for use and disposal.
  • Trẻ em và vật nuôi: Giữ trẻ em và vật nuôi tránh xa khu vực phẫu thuật.

3. Thiết lập và lắp ráp

Follow these steps to assemble and prepare your Kärcher K 1 pressure washer for use.

  1. Giải nén các thành phần: Cẩn thận lấy tất cả các bộ phận ra khỏi bao bì. Đảm bảo tất cả các bộ phận được liệt kê trong sách hướng dẫn đều có mặt.
  2. Kết nối ống áp suất cao: Attach the 10 ft high-pressure hose to the pressure washer's outlet and to the trigger gun. Ensure connections are secure.
  3. Attach Spray Lance: Connect the Vario Power spray lance to the trigger gun. For foam application, attach the foam cannon directly to the trigger gun.
  4. Kết nối nguồn nước: Connect a garden hose (not included) to the water inlet of the pressure washer. Ensure the garden hose is free of kinks and has a minimum diameter of 1/2 inch. Turn on the water supply fully.
  5. Xả khí khỏi hệ thống: Before plugging in the unit, squeeze the trigger gun to allow water to flow through the system and expel any trapped air. Continue until a steady stream of water emerges from the nozzle.
  6. Kết nối nguồn: Cắm máy rửa áp lực vào ổ cắm điện có nối đất.
Ở phía sau view of Kärcher K 1 Pressure Washer showing hose and power cord connections
Hình 2: Phía sau view of the Kärcher K 1, illustrating the connection points for the high-pressure hose and power cord, and the integrated storage for accessories.

4. Hướng dẫn vận hành

Once assembled and connected, your Kärcher K 1 pressure washer is ready for operation.

4.1 Hoạt động cơ bản

  1. Bật: Switch the pressure washer to the "ON" position.
  2. Bắt đầu dọn dẹp: Squeeze the trigger gun to begin spraying. The motor will start automatically.
  3. Adjust Pressure (Vario Power Lance): If using the Vario Power spray lance, twist the nozzle to adjust the pressure from low to high, or to a fan spray pattern.
  4. Ngừng dọn dẹp: Release the trigger gun to stop the water flow and motor. For extended breaks, turn the unit off.

4.2 Sử dụng súng phun bọt

  1. Fill with Detergent: Fill the foam cannon reservoir with Kärcher pressure washer detergent or another compatible pressure washer soap.
  2. Attach Foam Cannon: Disconnect the Vario Power spray lance and attach the foam cannon directly to the trigger gun.
  3. Apply Foam: Squeeze the trigger gun to apply foam to the desired surface.
  4. Adjust Detergent Dose: The detergent dose can be adjusted using the yellow dial on top of the foam nozzle.
Person using Kärcher K 1 with foam cannon to clean a car
Figure 3: Application of foam using the included foam cannon on a vehicle. The foam cannon connects directly to the pressure washer gun.
Close-up of Kärcher foam cannon with yellow dial for detergent adjustment
Figure 4: The yellow dial on top of the foam nozzle allows for easy adjustment of the detergent dose.

5. Bảo trì và Bảo quản

Proper maintenance and storage will extend the life of your pressure washer.

5.1 Sau mỗi lần sử dụng

  • Ngắt nguồn điện và nước: Turn off the pressure washer, unplug it, and turn off the water supply.
  • Giảm áp lực: Bóp cò súng để giải phóng hết áp suất còn lại trong hệ thống.
  • Thoát nước: Disconnect the garden hose and high-pressure hose. Allow all water to drain from the unit and hoses.
  • Phụ kiện sạch: Rinse the spray lance and foam cannon with clean water.

5.2 Lưu trữ

  • Chuẩn bị cho mùa đông (đối với vùng khí hậu đóng băng): If storing in an area where temperatures may drop below freezing, use a pump protector or antifreeze solution to prevent damage. Consult the Kärcher website or customer support for specific instructions.
  • Lưu trữ khô: Store the pressure washer and all accessories in a dry, protected area.
  • Bộ nhớ trên bo mạch: Utilize the onboard storage for the hose, spray lance, and trigger gun to keep components organized and protected.

KHAI THÁC. Xử lý sự cố

Tham khảo phần này để biết các vấn đề thường gặp và giải pháp.

Vấn đềNguyên nhân có thểGiải pháp
Đơn vị không khởi độngNo power supply; tripped circuit breaker; unit not plugged in.Check power connection; reset circuit breaker; ensure plug is fully inserted.
Không có áp lực nước hoặc áp lực nước dao động.Water supply off or restricted; air in pump; clogged nozzle; kinked hose.Ensure water supply is fully open; purge air from system; clean nozzle; straighten hose.
Rò rỉ nướcKết nối lỏng lẻo; vòng đệm chữ O hoặc phớt bị hỏng.Siết chặt tất cả các mối nối; kiểm tra và thay thế các vòng đệm/gioăng bị hỏng.
Chất tẩy rửa không phân phốiFoam cannon empty; foam cannon not properly attached; detergent dial set to minimum.Refill foam cannon; ensure secure attachment; adjust detergent dial.

7. Thông số kỹ thuật

Đặc điểm kỹ thuậtGiá trị
Thương hiệuKarcher
Số hiệu mẫuK1
Nguồn điệnĐiện
Áp suất tối đa1700PSI
Lưu lượng dòng chảy tối đa1.45 GPM
Chiều dài ống10 feet
Cân nặngKhoảng 9.8 lbs

8. Bảo hành và Hỗ trợ

Để biết thông tin bảo hành, đăng ký sản phẩm hoặc hỗ trợ kỹ thuật, vui lòng truy cập trang web chính thức của Kärcher webtrang web hoặc liên hệ với bộ phận chăm sóc khách hàng của họ. Giữ lại hóa đơn mua hàng để làm bằng chứng mua hàng.

Kärcher chính thức Webđịa điểm: www.kaercher.com

Lưu ý: Các điều khoản và điều kiện bảo hành cụ thể có thể khác nhau tùy theo khu vực và nhà bán lẻ.

© 2026 Kärcher. Bảo lưu mọi quyền.