KZ ZS10 Pro 2 Hybrid In-Ear Monitor User Manual

1. Giới thiệu

The KZ ZS10 Pro 2 In-Ear Monitors are designed to deliver high-fidelity audio with a hybrid driver configuration, suitable for stage monitoring, gaming, and general audio listening. This manual provides essential information for the proper setup, operation, and maintenance of your device.

The ZS10 Pro 2 continues a legacy of classic design while incorporating advanced acoustic engineering to provide a detailed and immersive listening experience.

2. Nội dung gói hàng

Vui lòng kiểm tra xem có đầy đủ các mục trong gói hàng của bạn không:

• KZ ZS10 Pro 2 In-Ear Monitors (1 pair)
• Detachable 3.5mm Audio Cable (1)
• Nút bịt tai bằng silicon (nhiều kích cỡ)
• Hướng dẫn sử dụng (tài liệu này)

3. Sản phẩm hếtview

The KZ ZS10 Pro 2 features a sophisticated internal structure designed for optimal sound reproduction. Understanding its components will aid in proper usage and maintenance.

Hình 3.1: Phát nổ View of KZ ZS10 Pro 2 Components

This image displays the internal components of the KZ ZS10 Pro 2 in an exploded diagram, illustrating the intricate hardware configuration. Key components are numbered for identification:

1. Lightweight Metal Cover
2. Bộ lọc bụi
3. 10mm Internal Magnetic Dynamic Driver
4. Công tắc điều chỉnh
5. 31736 Dual Matrix Balanced Armature Drivers
6. Gold-Plated Socket
7. 0.75mm Resin Cavity
8. Acoustic Filter Mesh
9. Đầu mút tai bằng bọt biển

Hình 3.2: Cấu hình trình điều khiển nội bộ

This image provides a transparent view of the KZ ZS10 Pro 2's internal structure, highlighting the placement of its multiple drivers. It shows how different drivers are dedicated to specific frequency ranges (low, mid, high, ultra-high) to ensure precise audio reproduction. The 10mm internal magnetic dynamic driver (labeled 1) handles lower frequencies, while the 31736 dual matrix balanced armature drivers (labeled 2) are responsible for high-frequency detail.

4. Thiết lập

4.1 Gắn cáp

1. Xác định tai nghe bên trái (L) và bên phải (R) cùng các đầu nối tương ứng trên dây cáp.
2. Align the cable connector with the socket on the earpiece. The connectors are designed to fit in only one orientation.
3. Gently push the cable connector into the earpiece socket until it clicks securely into place. Do not force it.
4. Lặp lại thao tác tương tự với tai nghe còn lại.

4.2 Lựa chọn và lắp đặt nút tai nghe

Proper ear tip selection is crucial for sound quality and comfort. Experiment with the included silicone ear tips of different sizes to find the best fit for your ears.

1. Gently remove any pre-installed ear tips by pulling them off the nozzle.
2. Hãy chọn kích thước nút tai phù hợp để tạo được độ kín tốt trong ống tai mà không gây khó chịu.
3. Push the chosen ear tip onto the nozzle of the earpiece until it is securely seated.

4.3 Kết nối với nguồn âm thanh

The KZ ZS10 Pro 2 uses a standard 3.5mm audio jack.

1. Insert the 3.5mm plug of the cable into the headphone jack of your audio device (smartphone, computer, audio interface, etc.).
2. Hãy đảm bảo kết nối chắc chắn.

5. Hướng dẫn vận hành

5.1 Cách đeo tai nghe kiểm âm

1. Xác định tai nghe bên trái (L) và bên phải (R).
2. Nhẹ nhàng đưa từng tai nghe vào ống tai tương ứng.
3. Adjust the earpiece until it feels comfortable and forms a good seal. The cable is designed to loop over the top of your ear for a secure fit.

5.2 Adjusting Sound with the 4-Level Switch

The KZ ZS10 Pro 2 features a built-in 4-level adjustment switch, allowing you to customize the sound signature to your preference. This switch is located on the side of each earpiece.

Figure 5.1: 4-Level Adjustment Switch

This image shows a close-up of the transparent earpiece, revealing the internal 4-level adjustment switch. The switch has four individual toggles labeled 1, 2, 3, and 4, which can be set to 'ON' or 'OFF' positions. These toggles allow users to fine-tune the audio output, adjusting aspects like bass, treble, and overall tonal balance to match personal listening preferences or specific audio content.

Each toggle switch corresponds to a specific frequency band or audio characteristic. Experiment with different combinations of ON/OFF settings to find your desired sound profile. A small tool (not included, e.g., a SIM ejector tool or a toothpick) may be needed to adjust the tiny switches.

Ghi chú: Adjust the switches carefully to avoid damage. Ensure both left and right earpieces are set to the same configuration for balanced sound.

6. Bảo trì

6.1 Cleaning the Earpieces and Ear Tips

• Regularly clean the earpieces and ear tips to maintain hygiene and sound quality.
• Remove the ear tips from the earpieces.
• Wash silicone ear tips with mild soap and water, then rinse thoroughly and allow them to air dry completely before reattaching.
• Wipe the earpieces with a soft, dry, lint-free cloth. For stubborn dirt, slightly dampen the cloth with water or isopropyl alcohol (ensure no liquid enters the drivers or ports).
• Use a small, soft brush (like a clean toothbrush) to gently remove any earwax or debris from the nozzle and acoustic filter mesh.

6.2 Chăm sóc cáp

• Tránh uốn cong quá gấp hoặc kéo căng cáp quá mức.
• Khi cất giữ, hãy cuộn dây cáp lỏng tay.
• Always pull from the plug, not the cable itself, when disconnecting from a device.

6.3 Lưu trữ

When not in use, store your KZ ZS10 Pro 2 in a clean, dry place, preferably in a protective case, to prevent damage from dust, moisture, and physical impact.

KHAI THÁC. Xử lý sự cố

8. Thông số kỹ thuật

9. Bảo hành và Hỗ trợ

KZ products are manufactured to high-quality standards. For warranty information specific to your region and purchase, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for warranty claims.

For technical support or further inquiries, please visit the official KZ webtrang web hoặc liên hệ với đại lý được ủy quyền của bạn.