BORUIT RJ-1156 LED Rechargeable Headlamp Hướng dẫn sử dụng

1. Lắp đặt pin và sạc lần đầu

The BORUIT RJ-1156 headlamp uses two rechargeable Lithium-Ion batteries. Ensure batteries are correctly inserted before first use. It is recommended to fully charge the headlamp before its initial operation.

This image illustrates the DC charging port, the battery indicator light, and the compartment for the two rechargeable batteries. The battery indicator shows red when charging and green when fully charged.

1. Tìm vị trí ngăn chứa pin ở phía sau đèn pha.amp đơn vị.
2. Open the compartment and insert the two Lithium-Ion batteries, ensuring correct polarity (+/-).
3. Đóng chặt ngăn chứa pin.
4. Connect the DC charging cable to the charging port on the battery pack.
5. Cắm đầu còn lại của cáp sạc vào bộ chuyển đổi nguồn USB tương thích (không kèm theo).
6. The battery indicator light will show red during charging and turn green when fully charged.

2. Gắn băng đô

Người đứng đầuamp comes with an adjustable elastic headband for comfortable wear.

1. Luồn dây thun của băng đô qua các khe được thiết kế sẵn trên băng đô.amp đơn vị.
2. Adjust the straps to ensure a snug and comfortable fit on your head.

3. Attaching the Bike Clip (Optional)

For bicycle use, the headlamp unit can be detached and mounted using the provided bike clip.

This image displays the headlamp unit separated from the headband and connected to the bike clip, ready for bicycle mounting.

1. Locate the disassembly button at the bottom of the headlamp đơn vị.
2. Press the button and push the headlamp unit forward to detach it from the headband bracket.
3. Secure the bike clip to your bicycle handlebars.
4. Slide the detached headlamp unit onto the bike clip until it clicks into place.

1. Bật/Tắt nguồn và Chọn chế độ

This image highlights the waterproof and non-slip switch button for controlling the headlampchức năng của 's.

Người đứng đầuamp features a single switch button for controlling power and light modes.

1. Bật: Press the switch button once. The headlamp will activate in High White Light mode.
2. Để thay đổi chế độ: Press the switch button repeatedly to cycle through the modes: High White Light → Low White Light → Red Light.
3. Để tắt: After cycling through all modes, press the button one more time, or press and hold the button for approximately 2 seconds in any mode.

This image demonstrates the three available light modes: High White Light, Low White Light, and Red Light, showing their appearance in a dark environment.

2. Điều chỉnh Lamp Góc đầu

This image illustrates the 90-degree adjustable lamp head, allowing users to direct the light as needed.

Người đứng đầuamp unit can be tilted up to 90 degrees to direct the light beam precisely where needed.

1. Gently hold the headlamp unit and tilt it up or down to your desired angle.
2. The mechanism is designed to hold the chosen angle securely.

3. Using the Red Light Function

This image demonstrates the red light function, highlighting its utility for preserving night vision and avoiding disturbance to animals, such as during beekeeping.

The red light mode is beneficial for specific situations:

• Night Vision Preservation: Red light does not easily stimulate the eyes, helping to maintain natural night vision.
• Thân thiện với động vật hoang dã: Less likely to startle animals, making it suitable for hunting, fishing, or wildlife observation.
• Thu hút côn trùng: Red light is less attractive to insects compared to white light.

1. Vệ sinh

• Lau đầuamp thân hình mềm mại, damp vải.
• Do not use abrasive cleaners or solvents, as they may damage the finish or electronic components.
• Hãy đảm bảo nắp đậy cổng sạc được đóng chặt để duy trì khả năng chống thấm nước.

2. Chăm sóc và bảo quản pin

• Recharge the batteries regularly, even if the headlamp is not frequently used, to prolong battery life.
• Lưu trữ tiêu đềamp ở nơi khô ráo, thoáng mát, tránh ánh nắng trực tiếp và nhiệt độ cao.
• Nếu lưu trữ trong thời gian dài, hãy sạc pin đến khoảng 50% dung lượng.